hama 184053 Voice Sport Bluetooth Stereo Earphones Instruction Manual

“Voice Sport”
Bluetooth®Stereo Earphones
00184053

Operating Instructions

Controls and Displays

1. Voice Assistant button
2. Microphone
3. Micro-USB charging socket
4. Multifunction button (MFB): Power /Play /Pause /Call acceptance
5. Volume +/Next song
6. Volume – /Previous song
7. LED function indicator
   Thank you for choosing the Hama product.
   Take your time and read the following instructions and information completely. Please keep these instructions in asafe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package Contents

• 1xBluetooth®stereo earphones
• 1xMicro-USB charging cable
• 3pairs of silicone earpads in various sizes (S, M, L)
• These operating instructions

 Safety Notes

• The product is intended for private, noncommercial use only.

• Use the product for its intended purpose only.

• Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.

• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.

• Do not drop the product and do not expose it to any major shocks.

• Do not operate the product outside the power limits given in the specifications.

• Do not open the device or continue to operate it if it becomes damaged.

• Since the battery is integrated and cannot be removed, you will need to dispose of the product as a whole. Do this in compliance with the legal requirements.

• Dispose of packaging material immediately according to locally applicable regulations.

• Do not modify the product in any way. Doing so voids the warranty.

• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  Warning –Battery

• Only use suitable charging devices or USB connections for charging.

• As a rule, do not charge devices or USB connections that are defective, and do not try to repair them yourself.

• Do not overcharge the product or allow the battery to completely discharge.

• Avoid storing, charging, or using batteries in extreme temperatures.

• When stored over a long period of time, batteries should be changed regularly (at least every three months).
  Warning –High volumes

• High sound pressure level!

• There is a risk of hearing damage.

• To prevent hearing loss, avoid listening to high volume levels for long periods.

• Always keep the volume at a reasonable level. Loud volumes, even over short periods, can cause hearing loss.

• Using this product limits your perception of ambient noise. For this reason, do not operate any vehicles or machines while using this product.

 Getting Started

• The earphones are equipped with a rechargeable battery. The battery must be fully charged before using the device for the first time.
•  Ensure that the earphones are switched off before charging them.
• Begin charging by connecting the included USB charging cable to the c harging socket (3) as well as to the USB connection of the PC/laptop.
• Alternatively, you can charge the earphones using a suitable USB charger. Please refer to the operating instructions for the USB charger used.
• The LED (7) is constantly lit red during charging.
• It takes around 2hours until the battery is completely charged.
• Once the charging process is complete, the LED (7) is lit blue.
• Disconnect all cable and mains connections after use.

Note

• The Bluetooth®connection is not available during charging.
• If the battery level is low, a voice says, ‘Low Battery’.The message is repeated twice at 5-minute intervals (approximately) before the earphones automatically switch off. The LED indicator (7) begins to flash red. Connect the earphones to a suitable USB port using the charging cable, in order to recharge the battery.

Operation

Switching the earphones on/off

• Press and hold the MFB button (4) for about 3seconds until the LED (7) emits flashes of alternating red and blue light.

• To switch off the headphones, press and hold the MFB button (4) for about 3seconds until the LED (7) goes out.
  Note
  The functions described in this section are only available for Bluetooth® -capable terminal devices.
  5.1. Bluetooth®pairing
  Note –Pairing

• Make sure that your Bluetooth®-capable terminal device is on and Bluetooth® is activated.

• Make sure that your Bluetooth®-capable terminal device is visible for other Bluetooth® devices.

• For more information, please refer to the operating instructions of your terminal device.

• The earphones and the terminal device should be no further than one meter apart. The shorter the distance, the better.

• Ensure that the earphones are switched off.

• Switch on the earphones by pressing and holding the MFB button (4) for about 3seconds until the LED (7) emits flashes of alternating red and blue light. The earphones are searching for a Bluetooth ® connection.

• Open the Bluetooth®settings on your terminal device and wait until Hama BTH VOICE SPORT appears in the list of Bluetooth®
  devices found.

• Select Hama BTH VOICE SPORT and wait until the earphones are listed as connected in the Bluetooth ® settings on your terminal device.

• If the connection was successful, you will hear another acoustic signal and the LED (7) slowly flashes blue.
  ****Note –Bluetooth® password Some terminal devices require a password in order to connect to another Bluetooth ® device.

• If your terminal device requests a password for connection to the earphones, enter 0000.
  Note

• After a successful connection, the LED (7) slowly flashes blue.

•  If the connection could not be set up, first switch off the earphones and then repeat the steps for the Bluetooth® connection listed
  under 5.1.
  5.2. Automatic Bluetooth®connection (after successful pairing)
  Note
  Once the earphones have connected to a terminal device, they will store the device and automatically connect to it again when the device is within range and has Bluetooth® enabled.
  Renewed pairing is not required for terminal devices that have previously been connected to these earphones.
  When the earphones are switched on, they will automatically attempt to connect to the terminal The device last connected. If you want to connect the earphones to the new terminal device, please follow the steps for the Bluetooth ®connection listed under 5.1.
  As soon as the earphones are connected to your terminal device, music is transmitted via Bluetooth® using these earphones. For further information, please also refer to the operating instructions of your terminal device.

• Switch on the earphones with the MFB button (4). The LED (7) begins to emit flashes of alternating red and blue light, and the earphones automatically connect to the terminal device last used.
  Note

• If the connection was successful, the LED (7) slowly flashes blue.

Note

• If the connection could not be set up, first switch off the earphones and then repeat the steps for the Bluetooth® connection listed
  under 5.1.

• It may be necessary to change the settings on your terminal device to enable it to automatically connect to the earphones.
  Note – Connection impaired
  After the headset and terminal device have been paired, a connection is established automatically.
  If the Bluetooth ® connection is not established automatically, check the following:

• Check the Bluetooth® settings of your terminal device to see whether Hama BTH VOICE SPORT is connected. If not, repeat the steps listed under 5.1. Bluetooth® pairing.

• Check whether obstacles are impairing the range. If so, move the devices closer together.

• The performance can also be affected by a weak battery.
  5.3. Audio playback
  Note

• Note that the functions described under 5.3.,5.4. and 5.5.are only possible with an active Bluetooth® connection.

• Your terminal device must also support the individual functions.

• For more information, please refer to the operating instructions of your terminal device.

• Functions can still be controlled directly via the terminal device.

• Set the volume on your terminal device to a low level.

• Switch on the earphones with the MFB button (4).

• Start audio playback on the connected terminal device.

• Press and briefly hold Volume + (5) to increase the volume.

• Press and briefly hold Volume – (6) to reduce the volume.

• Briefly press the MFB button (4) to start or pause the audio playback.

• Briefly press Volume + (5) to skip to the next track.

• Briefly press Volume – (6) to skip back to the previous track.

Note
An acoustic signal is given when the minimum or maximum volume is reached.
5.4. Hands-free function

• Press the MFB button (4) once to answer an incoming call.

• Press and hold the MFB button (4) for 2seconds or use your telephone to reject an incoming call.

• During a call, press the MFB button (4) once to end the call.

• Press and hold Volume + (5) to increase the volume.

• Press and hold Volume – (6) to reduce the volume.

• Press the MFB button (4) twice to redial the number last dialed.
  Note

• Not all terminal devices support all the functions specified above. For more information, please also refer to the operating instructions of your terminal device.

• Some functions and acoustic signals are dependent on your terminal device.
  Note –Call quality
  To increase the call quality, please make sure that you are near your mobile phone during the call.
  5.5. Voice Assistant function
  The Voice Assistant is an integrated, interactive function that enables you to start communication with your Siri or Google Assistant at the press of a button. This function enables you to ask questions and get various forms of help from your voice assistant, even if you are not holding your telephone in your hands.
  Below you will find some examples selected from a large number of possibilities.
  Note –Siri
  Siri is only available on suitable terminal devices with iOS 5orhigher (from iPhone 4s onwards).
  Note –Google Assistant

• The Google Assistant is only available on suitable terminal devices with Android 5.0 or higher, Google Play Services, >1.5 GB of free memory, and a minimum screen resolution of 720P.

Note –Google Assistant

• The Google Assistant app must be available on your terminal device and set as the default voice assistant.
  Press the Voice Assistant button (1) while the earphones are connected via Bluetooth® to start communication with your Siri or Google Assistant. As soon as you hear an acoustic signal, your voice assistant is ready to help you.

• Example 1:
  Press the Voice Assistant button (1) and then speak into your earphones: ‘What’s the weather like today?’ The voice assistant will  answer as follows, for example: ‘Mainly cloudy with some showers’

• Example 2:
  Press the Voice Assistant button (1) and then speak into your earphones: ‘What time is it?’ The voice assistant will answer as follows,  for example: ‘It is 8 pm

• Other examples: Set an alarm for tomorrow at 7 am. Play music. What’sinthe news?
  5.6. Disconnecting the earphones

• Switch off the earphones.

• Disconnect the earphones via the Bluetooth® settings on your terminal device.
  5.7. LED indicator
  The table below provides an overview of the various LED indicators you may see during the use of the earphones and explains what they mean.
  During charging

During operation

Troubleshooting

• Switch on the earphones and, if necessary, charge the battery.
• Increase the volume on your earphones or terminal device.
• Bring your terminal device and the earphones closer together and remove any sources of interference or obstacles.
• Try another music source.
• Connect the earphones to another terminal device.

Poor sound quality|

• Try another music source.
• Connect the earphones to another terminal device.
• Bring your terminal device and the earphones closer together and remove any sources of interference or obstacles.

Charging won’t
start|

• Check the cable connections.
• Use another charger.

My Google Assistant doesn’t respond|

• This function is only supported by terminal devices with Android 5.0 or higher.
• Check whether the Google Assistant is installed on your terminal device and is et as the default voice assistant.
• Check that your Android terminal device is connected to the earphones.
• Check whether the GoogleAssistant is available in your country.
• Further support can be found at:www.support.google.com/assistant.

• Check whether you are using the most up-to-date version of the  Google Assistant app.
• Disable the Google Assistant in the settings on your Android terminal device (under Settings >Apps >Google App > Disable). Then tap Enable (if you have deleted the Google app, please reinstall it).

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.

Warranty Disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting,  improper use of the product, or failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-115 (German/English) Further support information can be found here: www.hama.com

 Technical Data

Profile

| HFP V1.6 / HSP V1.2 / A2DP V1.2/AVRCP V1.4 / DI V1.3
Transmission frequency| 2,4 – 2,48 GHz
Battery| Li-Po 3,7 V
Battery capacity| 80 mAh
Current consumption| max. 80 mA
Charging voltage| max. 5V USB
Total weight| 25 g
Battery life in standby mode| 120 h
Talking time/music playback time Bluetooth®| 9h /7 h
Charging time| 2h

 Recycling Information

Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/Batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hereby, Hama GmbH &CoKG declares that the radio equipment type [00184053]isincompliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00184053 -> Downloads.

Hama GmbH &CoKG
86652 Monheim /Germany
www.hama.com

The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such  arksbyHamaGmbH&CoKGisunder license. Other trademarks and trade names are those of their respective owners.
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment is applied.

00184053/06.19

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>