RAZER KAIRA PRO Headset User Guide
- June 6, 2024
- Razer
Table of Contents
RAZER KAIRA PRO
MASTER GUIDE
FOR GAMERS. BY GAMERS™
Unleash true console immersion with the Razer Kaira Pro — a wireless PS5™ headset with haptics powered by Razer™ HyperSense. With the ability to feel what you hear and advanced connectivity to get you back in action seamlessly, you’ll have no trouble losing yourself in your game.
WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
-
Razer Kaira Pro
A. Auto-adjusting headband
B. Razer™ HyperSense button
C. Sidetone wheel
D. Razer SmartSwitch / EQ button
E. Plush leatherette ear cushions
F. Earcups Powered by Razer Chroma RGB™| G. Mic diaphragm
H. Microphone port
I. Charging port
J. Power button
K. Status indicator
L. Volume wheel
M. Mic mute switch
---|--- -
Type-C wireless dongle
-
Type-A to Type-C charging cable
-
Type-A to Type-C adapter cable
-
Detachable Razer™ HyperClear Supercardioid Mic
-
Important Product Information Guide
WHAT’S NEEDED
Product requirements
- PlayStation®4 / PlayStation®5 or PC (Windows® 10 64-bit or higher)
- USB Type-C or Type-A port
- Devices with Bluetooth audio capability
Razer Audio / Razer Chroma RGB app requirements
- iOS 12 / Android 8.1 Oreo (or higher) device with Bluetooth connectivity
- Internet connection for app installation
LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com
Got a question? Ask the Razer Support Team at support.razer.com
TECHNICAL SPECIFICATIONS
HEADPHONES
- Frequency response: 20 Hz – 20k Hz
- Impedance: 32Ω at 1 kHz
- Sensitivity (@1 kHz): 108 dB
- Drivers: 50 mm, with Neodymium magnets
- Inner ear cup diameter: Width 45mm / Length 65mm
- Oval ear cushions: Full-year coverage with cooling Fabric and plush leatherette, for comfort and optimized haptics
- Connection type: Wireless via Type-C dongle / Bluetooth
- Wireless range: 10 m / 30 ft
- Wireless frequency: 2.4 GHz
- Battery life: Up to 20 hours (with Chroma Lighting/Haptics) / Up to 50 hours (without Chroma Lighting/Haptics)
MICROPHONE
- Detachable mic boom
- Frequency response: 100 – 10,000 Hz
- Signal-to-noise ratio: > 60 dB
- Sensitivity (@1 kHz): -54 ± 3 dB
- Pick-up pattern: Unidirectional
RANGE
- Bluetooth wireless range: Up to 10 m / 30 ft
SYSTEM REQUIREMENT
- PlayStation 5 / PlayStation 4
- PC
- Devices with Bluetooth audio capacity
GETTING STARTED
CHARGING THE HEADSET
Connect the Razer Kaira Pro to a powered USB port using the charging cable.
For best results, please fully charge the headset before using it for the
first time. A depleted headset will fully charge in about 4 hours.
CONNECTING YOUR HEADSET
A. TO A PLAYSTATION CONSOLE / PC VIA 2.4GHZ
-
Plug the Type-C wireless dongle into your PlayStation console or PC.
-
Press and hold the Power button until the status indicator is briefly lit or until you hear a voice prompt.
-
Wait until the status indicator briefly becomes static green indicating that the headset is now connected to the Type-C wireless dongle.
-
On your PlayStation console or PC, set the Razer Kaira Pro as the default Input and Output Device.
On PlayStation 5, go to Settings > Sound
- On Microphone, set the Input Device to Razer Kaira Pro (2.4).
- On Audio Output, set the Output Device to Razer Kaira Pro (2.4).
On PlayStation 4, go to Settings > Devices > Audio Devices
- Set the Input Device and Output Device to Razer Kaira Pro (2.4).
On PC / Laptop
a. Right-click on the sound icon on the system tray and then select Open
Sound settings.
b. On the Sound window set Razer Kaira Pro (2.4) as the default
Output and Input
B. TO OTHER DEVICES VIA BLUETOOTH
While powered on, press the Razer SmartSwitch / EQ button for 5 seconds to
activate Bluetooth pairing mode. Follow your device’s instructions and select
“Razer Kaira Pro (BT)” from the list of found devices. The status
indicator will briefly change to static blue to indicate that the headset is
now paired with your device.
RAZER SMARTSWITCH
With the Razer Kaira Pro connected to a PC or PlayStation console (via 2.4
GHz) and a mobile device (via Bluetooth), you’ll be able to manage calls from
your mobile device even while gaming on your PC or PlayStation console. The
status indicator will briefly show static white to indicate that the headset
is connected to both audio sources.
USING YOUR HEADSET
BATTERY LEVEL
When unplugged and powered on, the status indicator will show the connection
and battery status.
While in use, you’ll hear a voice prompt when the headset needs to be
recharged; during such time, the indicator will continue showing the battery
level until you charge the headset.
POWER BUTTON
Power ON / OFF
Power on the headset by holding the Power button until the status indicator is
on, and holding the Power button again to turn off. An audio prompt will help
notify you when the headset is powered on or off.
Other functions
Other power button functions are available when the headset is powered on and
connected to your device via Bluetooth. These functions operate based on your
device’s current activity.
Single press | Play/pause |
---|
Accept incoming calls or end the current call
Put-call on hold and accept an incoming call
End call and swap to on-hold call
Double press| Reject incoming call
Swap calls
Skip track
Triple press| Previous track
While powered off, press and hold for 5 seconds| Activate Bluetooth pairing
mode
Some features listed here may not be applicable to certain devices.
USING THE RAZER HYPERSENSE BUTTON
With Razer HyperSense enabled, the headset will convert sound signals into
vibrations in real-time, providing tactile feedback from within the earcups.
To control its intensity level, press the HyperSense button to cycle through
Low intensity, Medium intensity, High intensity, and Disable HyperSense. A
distinct tone will be heard when cycling through its settings.
By default, this feature is enabled and set to Medium intensity. The
HyperSense intensity can also
be customized from the Razer Audio app.
RAZER SMART SWITCH / EQ BUTTON
Switching EQ Presets
Press the Razer SmartSwitch / EQ button to switch between Default, Game,
Music, Movie, and Custom* EQ presets are available on the headset.
*** This preset will only be available when you customize a preset on the
Razer Audio app.
Switching audio source**
When powered on and connected to any audio source, double press the Razer
SmartSwitch / EQ button to switch between 2.4 GHz and Bluetooth audio source
or vice versa.
Using Bluetooth as the audio source will reconnect the headset to the last
known device. Pairing mode will be activated if no device is found.
Enable / Disable Gaming Mode
While connected via Bluetooth, triple press the Razer SmartSwitch / EQ button
then hold the last press for 2 seconds to activate Gaming Mode. Once enabled,
the headset will function at a lower latency; giving you real-time audio
feedback while gaming. Repeat to disable gaming mode.
This feature is only available on Bluetooth connections. For best performance,
it is recommended to keep the headset within a very close distance of the
audio source.
VOLUME WHEEL
Rotate the Volume wheel to increase or decrease the volume.
SIDETONE WHEEL
Rotate the Sidetone wheel to adjust the volume of your voice that you can hear
through the headset.
RAZER™ HYPER CLEAR SUPERCARDIOID MIC
Plug the Razer™ HyperClear Supercardioid mic into the headphone and bend until
it is parallel to your mouth. Make sure the mic diaphragm is in front and the
air vent is facing away from your mouth.
Slide the mic mute switch to mute or unmute the microphone.
COMFORT
It’s recommended to gently stretch the headset before placing it over your
head to minimize headband stress, however, doesn’t stretch the headset beyond
its limits.
PERSONALIZE YOUR MOBILE EXPERIENCE
Razer Audio app
Making advanced customization just got a whole lot easier for your Razer Kaira
Pro. With the Razer Audio app, adjust the HyperSense intensity, personalize
your own EQ setting or cycle through presets, customize its auto-shutoff
feature, and much more — anytime, anywhere.
Razer Chroma RGB app
With 16.8 million colors and a suite of effects to choose from, use the Razer
Chroma RGB app to bring out your style as you personalize the headset’s
lighting.
***** When using this app, make sure that the headset is only connected to your mobile device via Bluetooth. A solid blue status indicator indicates this connection.
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Kaira Pro, we
suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go to
support.razer.com for assistance.
Do not take apart the device (doing so will void your warranty) and do not
attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity, or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
Should the temperature exceed this range, unplug and/or switch off the device
in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in
lowered awareness of your external surroundings. Please remove the device when
engaging in any activities that require active awareness of your surroundings.
Listening to excessively loud volumes over extended periods of time can damage
your hearing.
Furthermore, legislation of certain countries permits a maximum sound level of
86db to affect your hearing for 8 hours a day. We, therefore, recommend that
you reduce the volume to a comfortable level when listening for prolonged
periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Kaira Pro requires minimum maintenance to keep it in optimum
condition. Once a month we recommend you clean it using a soft cloth or cotton
swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
BATTERY WARNING
The Razer Kaira Pro contains a Li-ion rechargeable battery. In general, the
life expectancy of such batteries is dependent upon usage. If you suspect that
the Li-ion rechargeable battery inside the Razer Kaira Pro may be drained (has
a low charge), try charging it.
Caution: Do not open, mutilate, or expose to conducting materials (metal),
moisture, liquid, fire, or heat. Doing so may cause batteries to leak or
explode, resulting in personal injury. Battery life varies with usage.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2021 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, and “For Gamers. By Gamers.” are trademarks or registered
trademarks of Razer Inc. and/or affiliated companies in the United States or
other countries. All other trademarks are the property of their respective
owners.
Android, Google, Google Logo, Google Play, and the Google Play logo are
registered trademarks of Google LLC.
Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc. iOS is
a trademark or registered trademark of Cisco in the U.S. and other countries
and is used under license.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Razer is under license.
“ “, “PlayStation”, ”PS5”, and “PS4” are registered trademarks of Sony
Interactive Entertainment Inc. All rights reserved. Manufactured and
distributed under license from Sony Interactive Entertainment LLC.
Windows and the Windows logo are trademarks of the Microsoft group of
companies.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents,
patent applications, or other intellectual property rights (whether registered
or unregistered) concerning the product in this guide. Furnishing this guide
does not give you a license to any such copyright, trademark, patent, or
another intellectual property right. The Razer Kaira Pro (the “Product”) may
differ from pictures whether on the packaging or otherwise. Razer assumes no
responsibility for such differences or for any errors that may appear.
Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit
razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of the distribution of, sale of, resale of,
use of, or inability to use the Product. In no event shall Razer’s liability
exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased. If any term herein is held to
be invalid or unenforceable, then such term (in so far as it is invalid or
unenforceable) shall be given no effect and deemed to be excluded without
invalidating any of the remaining terms. Razer reserves the right to amend any
term at any time without notice.
FOR GAMERS. BY GAMERS™
Documents / Resources
|
RAZER KAIRA PRO
Headset
[pdf] User Guide
KAIRA PRO, Headset
---|---