hama 00188324 Wireless Charger QI-FC10S-Fabric Instruction Manual

hama 00188324 Wireless Charger QI-FC10S-Fabric

Operating Instructions

Controls and Displays

1. USB-C input
2. Status LED

LED Function Indicator

Power supply|

Red – green – red – off

Standby|

Off

Charging|

Constant green

End of charging|

Off ¹

Error message|

Flashes red

¹ At Apple iPhones the LED keeps constant green light at end of charging.

Take your time and read the following instructions and information completely.Please keep these instructions in asafe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.

Package Contents

• ‘QI-FC10S-Fabric’ Wireless Charger for smartphones
• 1xUSB-C cable
• These operating instructions

Safety Notes

• Protect the product from dirt, moistureand overheating, and only use it in adry environment.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in areas wherethe use of electronic devices is not permitted.
• In order to prevent damage caused by overheating, make surethe product is not covered by textiles, metal or other objects.
• Dispose of packaging material according to locally applicable regulations.
• Do not modify the product in any way.Doing so voids the warranty.
• Use the product for its intended purpose only.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Keep this product, as all electrical products, out of the reach of children!
• Use the item only in moderate climatic conditions.
• Do not use the product in moist environments and avoid splashes.
• The product is intended for indoor use only.

Risk of Electric Shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the
• AC adapter,the adapter cable or the mains cable aredamaged.
• Do not attempt to service or repair the product yourself.Leave any and allservice work to qualified experts.

Do not put any bank cards or similar cards with magnetic strips, or other magnetically sensitive objects, on the product.
The data on the cards could be damaged or deleted.

Warning
Ensurethat thereare no metal parts (for example, metal plate for magnetic holder) on the back of your terminal device. Metal may heat up significantly in the field of the induction charger,causing damage to your terminal device and/or the charger.

Getting Started and Operation

Warning

• Only operate the productfromasocket that has been approved for the device. The socket must be installed close to the productand must be easily accessible.
• Disconnect the productfromthe power supply usingthe On/Off switch –ifthis is not available, unplug thepower cordfromthe socket.
• If using amulti-socket power strip, makesurethat the total power consumption of all connected devices does not exceed the power strip’smaximum throughput rating.
• If you will not be using the product for aprolonged period, disconnect it from mains power.

Note

• To be able to charge your terminal device using the wireless charger,your terminal device must be compatible with inductive charging technology.Please read the operating instructions of your device.
• Note that the presence of mobile phone cases, covers or other materials between the wireless charger and the back of your terminal device can interferewith charging or even prevent it.
• Connect the includedUSB-C cable to the USB-C input (1)onthe inductive charger and to asuitable USB charger. Please refer to the operating instructions for the USBcharger.
• The maximumcharging power of up to10Wis achieved onlywithaQualcomm Quick Charge charger (9 V/1.67 A).
• The status LED (2)brieflylights up red, then green, then redtoconfirm an active power supply.After that, the LED goes out.

Warning
As arule, do notuse charging devices or USB connections that aredefective and do not try to repair them yourself.

• Put your terminal device on theinductive charger (B) withthe back to the charger.
• Chargingstarts as soon as an effective induction field has been generated. The status LED (2) is aconstant green.The current charging status appears on your terminal device.
• If no connection can be established through induction, you mayhave to changethe position of yourterminaldevice (B).
• Charging stops automatically once your device’sbattery is fully charged. The statusLED (2) goesout.
• Remove your terminal device from the inductive charger and disconnect the charger from the power supply.

Care and Maintenance

Only clean this productwith aslightly damp,lint-free cloth anddonot use aggressive cleaning agents.

Note
Disconnect the device from the power supplybeforecleaning it or if it is notgoing to be used for along period of time.

Warranty Disclaimer

Hama GmbH &Co KG assumes no liability and providesnowarranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructionsand/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questionsabout this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com

Technical Data

Wireless Charger

Input|

5V = 2A / 9 V = 1.67 A

Output (under optimized conditions)|

5W / 7.5 W / 10W max.

Dimensions|

65 mm x 109 mm x 82mm

Connection|

USB-C

Recycling Information

Note on environmental protection:

After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that aproduct is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hereby,Hama GmbH &CoKGdeclares that the radio equipment type [00188324, 00188325] is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00188324, 00188325 -> Downloads.

Hama GmbH &CoKG
86652 Monheim /Germany
www.hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>