eVOLUTION EVOSH1 Power Tools Compact Folding Saw Horses Twin Instructions
- June 6, 2024
- Evolution
Table of Contents
EVOSH1 Power Tools Compact Folding Saw Horses Twin
).push({});
- Keep the work area clear of obstructions and well-ventilated. A cluttered, untidy and poorly ventilated workplace makes accidents more likely.
- Consider the work area environment. Do not use power tools in damp or wet conditions. Keep the work area well lit. Do not use power tools in the presence of flammable liquids, gasses, or dust-laden atmospheres.
- Keep children and bystanders at a safe distance. Visitors are a distraction and are difficult to protect. They are unlikely to have any knowledge of safety procedures or protocols.
- Store idle equipment. Store idle or presently unused equipment in a locked, dry cupboard.
- Use appropriate protective equipment. Approved safety glasses, gloves, and hearing protection should be worn by the operator and any assistants when operating any power saw.
- Remain alert. A moment’s inattention when operating any power tool could result in serious personal injury. Do not use this equipment if you are tired or under the influence of drugs, alcohol, or when taking certain prescribed medicines (consult your doctor).
- Do not overreach. Keep properly balanced footing at all times.
SPECIFIC SAFETY INSTRUCTIONS
-
When lifting the Saw-Horse, use proper lifting techniques to avoid personal injury.
-
Ensure the work area is well lit while working.
-
Ensure Saw Horse is standing on a level surface that is clean, dry, and free of debris.
-
Ensure all 4 legs have solid contact with the floor. If the Saw-Horse is not positioned level and straight, loads placed upon it
could fall, potentially causing damage to the item(s) loaded on it, and possible severe personal injury or death. -
Ensure the load placed on any Saw Horse does not exceed the applicable Safe Working Load Rating. Overloading can lead to failure of the Saw-Horse, potentially causing damage to the item(s) loaded on it, and possible severe personal injury or death.
-
Never stack Saw Horses to obtain extra height.
TECHNICAL SPECIFICATION
| METRIC| IMPERIAL
---|---|---
Product code| 005-0003
Tabletop width| 825mm| 32-1/2′
Tabletop depth| 131mm| 5-5/32′
Tabletop height
Saw Horse width with legs| 98mm| 3-13/16′
36-13/16″
936mm
Saw Horse depth with legs| 465mm| 18-9/32″
Saw Horse height with legs| 742mm| 29-1/8′
Product weight| 3.6kg| 7.91bs
Load capacity| 500kg| 1100Ibs
ASSEMBLY
Step 1. (a) Main component (b) Hooks (2pcs).
Step 2. Open the left leg.
Step 3. Open the right leg.
Step 4. Stand the Saw Horse up.
Step 5. Set up the hooks on the hole at the table edge.
Step 6. Each Saw Horse comes with a pair of steel hooks that can be used
to support lengths of lumber. Hooks are retained by dimples and fit tightly.
Seat them in place with a gentle tap from a hammer.
Step 7. Use 2×4’s or similar timber as shown to create a trestle table
(or similar) to support your workpiece. Not to be used as a platform for
standing or sitting.
Step 8. Saw Horse as a table (2pcs).
US
Evolution Power Tools LLC
8363 Research Drive
Davenport, IA
52806
T: 866-EVO-TOOL| EU
Evolution Power Tools SAS
61 Avenue Lafontaine
33560
Carbon-Blanc
Bordeaux
T: +33 (0)5 57 30 61 89
---|---
UK
Evolution Power Tools Ltd
Venture One, Longacre Close
Holbrook Industrial Estate
Sheffield
S20 3FR
T: 0114 251 1022| AUS
Total Tools (Importing) Pty Ltd
20 Thackray Road
Port Melbourne
Vic 3207
T: 03 9261 1900
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>