AAB 12cm Super Silent Fan Installation Guide
- June 7, 2024
- AAB
Table of Contents
AAB 12cm Super Silent Fan
The installation guide consists of diagrams illustrating the steps to install the AAB COOLING FAN 120mm PWM into a computer case.
Step-by-Step Installation
- Locate the area in the computer case where the fan is to be installed.
- Align the fan with the mounting holes on the case.
- Secure the fan to the case using screws provided with the fan.
Fan Connection Diagrams
There are diagrams showing how to connect the 4-pin PWM fan connector to both 3-pin and 4-pin headers on the motherboard.
3-Pin Connection (A)
- Connect the 4-pin fan connector to the 3-pin header, aligning the tabs and pins correctly.
- Note that the PWM function will not be available with a 3-pin connection.
4-Pin Connection (B)
- Connect the 4-pin fan connector to the 4-pin header for full PWM control.
Specifications
| Dimension | 120mm x 120mm x 25mm |
|---|---|
| Mounting Hole Diameter | 4.3mm |
| Mounting Dimensions | 105mm x 105mm |
FAQ
What is PWM?
PWM stands for Pulse Width Modulation and is a method to control the fan speed.
Can I install this fan on a 3-pin connector?
Yes, but the PWM function will not be available, and the fan will run at full speed.
What are the dimensions of the fan?
The fan's dimensions are 120mm x 120mm x 25mm.
What size are the mounting holes?
The mounting holes have a diameter of 4.3mm.
How do I know if my fan is installed correctly?
Ensure that the fan is secured tightly to the case with the screws provided and that the connector is properly aligned and connected to the motherboard header.
Installation Instructions
AABCOOLING FAN 120mm PWM
Connection
Dimension
Visual Descriptions
The images include diagrams of computer case fan installation, a PWM fan connector guide, and a technical drawing with dimensions for the fan.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>