Munters FH1704 Chain Fan Hanger Kit Instruction Manual
- June 6, 2024
- Munters
Table of Contents
Chain Fan
Hanger Kit
Instruction Manual
Chain Fan Hanger Kit
Models: FH1704
Chain Fan Hanger Kit
Instructions for Use and Maintenance
Thank You:
Thank you for purchasing a Munters Chain Fan hanger kit. Munters equipment is
designed to be the highest performing, highest quality equipment you can buy.
With the proper installation and maintenance, it will provide many years of
service.
Please Note:
To achieve maximum performance and ensure long life from your Munters product
it is essential that it be installed and maintained properly. Please read all
instructions carefully before beginning installation.
Warranty:
For Warranty claims information see the “Warranty Claims and Return Policy”
form QM1021 available from the Munters Corporation office at
1-800-227-2376 or by e-mail at
aghort.info@munters.com.
Conditions and Limitations:
- Products and Systems involved in a warranty claim under the “Warranty Claims and Return Policy” shall have been properly installed, maintained, and operated under competent supervision, according to the instructions provided by Munters Corporation.
- Malfunction or failure resulting from misuse, abuse, negligence, alteration, accident, or lack of proper installation or maintenance shall not be considered a defect under the Warranty.
Unpacking the Equipment
Before beginning installation, check the overall condition of the equipment.
Remove packing materials, and examine all components for signs of shipping
damage. Any shipping damage is the customer’s responsibility and should be
reported immediately to your freight carrier.
1.1 Parts List
Each FH1704 Includes:
ID| Qty.| Cat. No.| Description
[A]| 8| KX1058| S-Hook, Open, 0.25″THK x 2″L., 189LB. Cap., ZP
[B]| 4| KX1054| 1 ⁄8” Chain, 10’L., Light Duty, 120LB. Cap, ZP
- If hanging the Bottom Inlet 36″ Vario Fan proceed to Step 1.
- If hanging the Top Inlet 36″ Vario Fan proceed to Step 2.
- If hanging a Belt Drive Apex Fan proceed to Step 3.
- If hanging a Munters Drive Apex Fan proceed to Step 4.
Installation Instructions
2.1 Bottom Inlet 36″ Vario Fan
Step 1
Hang Fan Assembly from each Eye Nut to 3 separate points on ceiling or truss
using (6) S-Hooks [A] and (3) Chains. See Figure 1. Chains must not run
straight up but should be at a slight angle. Hanging points must be capable of
holding the weight of the Fan Assembly (200 lbs. [90 Kg]).
2.2 Top Inlet 36″ Vario Fan
Step 2
Hang Fan Assembly from each Hanging Bracket to 4 separate points on ceiling or
truss using (8) S-Hooks [A] and (4) Chains. See Figure 2. Chains must not
run straight up but should be at a slight angle. Hanging points must be
capable of holding the weight of the Fan Assembly (200 lbs. [90 Kg]).
2.3 Belt Drive Apex Fan
Step 3
Install (2) Eye Hooks and Nuts (not provided) in the top flange of Apex Fan
and then hang Fan Assembly from each Eye Hook to 2 separate points on ceiling
or truss using (4) S-Hooks [A] and (2) Chains.
See Figure 3. Chains must not run straight up but should be at a slight
angle. Hanging points must be capable of holding the weight of the Fan
Assembly (160 lbs. [75 Kg]).
2.4 Munters Drive Apex Fan
Step 4
Install (2) Eye Hooks and Nuts (not provided) in the top flange of Apex Fan
and then hang Fan Assembly from each Eye Hook to 2 separate points on ceiling
or truss using (4) S-Hooks [A] and (2) Chains.
See Figure 4. Chains must not run straight up but should be at a slight
angle. Hanging points must be capable of holding the weight of the Fan
Assembly (200 lbs. [90 Kg]).
Step 5
If it is desired to angle the hanging fans down, attach Eye Hooks and Nuts
(not provided to the bottom flange of the Apex Fan and then use the remaining
(4) S-Hooks [A] and (2) Chains to pull the bottom of the fan up to the desired
angle. See Figure 5.
This page left blank intentionally
Fan Chain Hanging Kit developed and produced by Munters Corporation, Lansing, Michigan U.S.A. 1-800-227-2376
Munters Europe AB, Isafjordsgatan
1, P.O. Box 1150, SE-164 26 Kista,
Sweden.
Phone +46 08 626 63 00,
Fax +46 8 754 56 66.
Munters Corporation 2691
Ena Drive Lansing, MI 48917
The U.S.A.
Phone +1 800-227-2376,
Fax +1 517-676-7078
www.munters.us/aghort
Australia Munters Pty Limited, Phone +61 2 6025 6422, St–call Munters
Brasil Industria e Comercio Ltda, Phone +55 41 3317 5050, Canada/US
Munters Corporation Lansing, MI Phone +1 517 676 7070, China Munters Air
Treatment Equipment (Beijing) Co. Ltd, Phone +86 10 80 481 121, Denmark
Munters A/S, Phone +45 9862 3311, India Munters India, Phone +91 20 3052
2520, Indonesin Munters, Phone +62 818 739 235, Munters Italy S.p.A.,
Chiusavecchia, Phone +39 0183 52 11, Japan Munters K.K., Phone +81 3 5970
0021, Korea Munters Korea Co. Ltd., Phone +82 2 761 8701, Mexico
Munters Mexico, Phone +52 818 262 54 00, Russia Munters AB, Phone +7 812
448 5740, Singapore Munters Pte Ltd., Phone +65 744 6828, South Africa and
Sub – Sahara Countries Munters (Pty) Ltd., Phone +27 11 997 2000,
Spain Munters Spain S.A., Phone +34 91 640 09 02, Sweden Munters AB, Phone +46
8 626 63 00, Thailand Munters Co. Ltd., Phone +66 2 642 2670, Turkey
Munters Form Endiistri Sistemleri A.S, Phone +90 322 231 1338, – Munters
Corporation Lansing, MI Phone +1 517 676 7070, Vietnam Munters Vietnam,
Phone +84 8 3825 6838, Export & Other countries Munters Italy S.p.A.,
Chiusavecchia Phone +39 0183 52 11
© Munters Corporation, September 2020
QM1141r0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>