D-Link AX3200 Mesh Wi-Fi 6 Router DIR-X3260 Installation Guide

Quick Installation Guide
DIR-X3260
AX3200 Mesh Wi-Fi 6 Router

PACKAGE CONTENTS

• DIR-X3260 || AX3200 Mesh Wi-Fi 6 Router
• Power Adapter
• Ethernet Cable
• Quick Installation Guide
• Quick Installation Card

INSTALLATION

OPTION 1
D-LINK WI-FI APP SETUP

1. Download the D-Link Wi-Fi app and launch it.

2. Tap Install New Device. Scan the QR code on the Quick Installation Card. Follow the on-screen instructions to complete the setup.

OPTION 2

WEB BROWSER SETUP

1. Plug the router into a power source. Make sure that the power button is on. Wait for the wireless LED’s to be lit solid.

2. Connect your computer to the Wi-Fi details printed on the Quick Installation Card. Type http://dlinkrouter.local./ or http://192.168.0.1 into a web browser. You will be asked for your Device/Admin Password. By default this password is “password”. Type that in and follow the on-screen instructions to complete the setup.

TECH TIP: Consider using the same Wi-Fi name and password as your old router. This will allow your existing Wi-Fi devices to automatically connect to your new router.

You’re all good to go! Once the setup is complete, you can connect your devices using the Wi-Fi name (SSID) and password that you created during the setup. Enjoy the Internet!

FREQUENTLY ASKED QUESTIONS

Why can’t I access the web-based configuration utility?

Verify that http://dlinkrouter.local./ has been correctly entered into your Web browser. Make sure that you are connected to the correct Wi-Fi Name/ SSID and password printed on the Quick Installation Card. Alternatively, you can use http://dlinkrouterXXXX.local./ where XXXX represents the last 4 characters of the MAC address. The device specific URL and MAC address are both located on the device label attached to the device.

Why can’t I access the Internet?

Ensure that your modem/gateway is powered on. Also ensure that the Ethernet cable is securely connected to both the router and modem. Verify that the Internet LED is illuminated on your router. If you still cannot access the Internet, power off your modem and router and power them back on, wait until all the LED’s are lit and try again.

What do I do if I forgot my Wi-Fi password?

If you forgot your password, you must reset your router. This process will revert all of your settings back to the factory defaults.

How do I restore the router to its factory default settings?

Locate the reset button on the rear panel of the router. With the router powered on, use a paper clip to hold the button down for 10 seconds.
Release the button and the router will go through the reset procedure.

GPL CODE STATEMENT

This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General
Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are
available to view the full GPL Code Statement at: https://tsd.dlink.com.tw/GPL

The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.

Written Offer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGP Lsource code files via CD- ROM for a nominal cost to cover shipping and media charges as  allowed under the GPL and LGPL.

Please direct all inquiries to:

Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708

Email:
GPLCODE@dlink.com

VOICE ASSISTANTS

Amazon Alexa Setup for D-Link Wi-Fi https://www.dlink.com/en/alexa

The Google Assistant Setup for D-Link Wi-Fi https://www.dlink.com/en/google- assistant

TECHNICAL SUPPORT

Having trouble installing your new product? D-Link’s support website contains live chat, video tutorials, commonly asked questions, the latest user documentation and software updates for D-Link products.

United States
Website: http://support.dlink.com
Telephone: 877-453-5465

Canada
Website: http://support.dlink.ca
Telephone: 800-361-5265

Setup and How To videos available here:
YouTube.com/DLinkTutorials

FCC WARNING

This device is complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. The device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

2020/12/24_90x130 v1.0(CA_EN) 610000010935

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>