Aqara G3 Smart Camera Hub User Manual

Camera Hub G3 User Manual

Product Introduction

The Camera Hub G3 is a pan and tilt (PT) surveillance camera, which integrates the hub function of the new generation of Zigbee and supports 2K (1296p) video. With the built-in NPU (neural network computing unit), it supports rich AI facial recognition functions, as well as HomeKit Secure Video. With automatic PT function, it supports fixed position setting, video cruise path planning, power-off memory, and other functions,
and allows learning and replacing the remote control of various household appliances through the embedded infrared remote control module, which is a new generation of integrated hub camera products for home security and intelligent control of Aqara devices.

Front view of the Product:

Button description:

1. Long press for 3 seconds: Push emergency alert message
2. Long press for 10 seconds: Reset the network and unbind the device
3. Press 10 times quickly: Restore the factory settings

Quick Setup

1. Download the Aqara Home app
   Search for “Aqara Home” in the Apple App Store, Google Play, Xiaomi GetApps, Huawei App Gallery, or scan the following QR code to download the Aqara Home app.
   https://aiot-management.aqara.cn/config/app/aqaraHomeDeveloping

2. Power up and turn on the camera
   Locate the power interface at the bottom of the product and plug the Type-C power cord to connect the power adapter.
   When the camera is started, the status indicator will turn yellow and flash quickly.

• If the indicator is not yellow and does not flash quickly, please try to press the function button rapidly 10 times to restore the factory settings. 3. Add camera
  Connect to Aqara Home
  Open the Aqara Home app, click “+” in the upper right corner of the home page, select Camera Hub G3, and follow the instructions of the app to operate. After a successful connection, the status indicator of the device will be blue.
  If the device addition fails, please confirm the following points:
• The Wi-Fi name or password contains an unsupported special character, such as, @, #, %, -, $, etc., resulting in a failure to connect to the router.
  Please change it to a commonly used character and try again.
• If the camera cannot recognize the QR code generated by the mobile phone. Please make sure that the screen size of the mobile phone is not
  less than 4.7 inches, and make sure that you don’t use the backlight of the camera to shoot the QR code.
• Check whether the router has enabled the Wi-Fi anti-squatter setting, which causes the camera to be unable to connect to the Internet.
• Check whether the router has enabled AP isolation, which leads to the failure to search the camera on the mobile phone in the LAN.
  Connect to Apple HomeKit
  Open the Apple Home app, click the “+” in the upper right corner to go to the Add Accessories page, scan or manually enter the HomeKit setting code at the bottom of the camera, and bind the device to HomeKit.
  Instructions for HomeKit Addition Failures
• It prompts that “Accessory failed to be added”. Due to repeated adding failure, the error message cached in the iOS system cannot be released.
  Please restart the iOS device and reset the camera and try again.
• It prompts that “Accessories have been added”. After restarting the iOS device and resetting the camera, manually enter the HomeKit setting code to add it again.
• It prompts that “No accessories are found”. Please reset the camera, wait for 3 minutes, and then manually enter the HomeKit setting code to add it again. 4. Add accessory
  After the camera is added successfully, please open the Aqara Home app and refer to the operation manual of the accessory to add.

Product Installation

1. The packaging box of this product does not contain a bracket but does support a 1/4-inch threaded screw. If wall mounting or lifing is required, the bracket or any other threaded screw-compatible mount shall be purchased separately.
2. Please ensure that the camera is successfully added to the app before mounting it on the wall.
3. The camera can be placed on a writing desk, dining room table, bookcase, coffee table, or other horizontal surfaces for use.
4. After mounting the camera in the lifting position, the image needs to be flipped in the Aqara Home app to be viewed normally.

• The camera should be placed within the range of wireless Wi-Fi signal coverage.
• Do not place it near a strong electromagnetic interference source.
• Avoid a direct light source to the camera lens at close range.
• Make sure there are no obstructions around the device.
• This product is only for indoor use.

The above diagram shows the installation methods. In case of using a bracket/mount purchased separately, please refer to its installation guide.

Description of Status Indicator

the account is being bound
The blue indicator is on steady| Working properly
The red indicator is on steady| Live video is in progress
The white indicator is on steady| No network is connected in 10 minutes after starting
The purple indicator flashes| Accessories are allowed to be added
The yellow indicator flashes slowly| Upgrading the firmware
Off| The indicator is turned off/the device sleeps/the device is not powered on

Specifications

compatible with exFat and FAT32 file formats, and supports a maximum capacity of 128GB)

Notice

Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
A 10-day recording history from your Camera Hub G3 is securely stored in iCloud and available to view in the Apple Home app on your iPhone, iPad, or Mac. You can add one camera to your 200GB plan or up to five cameras to your 2TB plan at no additional cost. Camera recordings don’t count against your iCloud storage limit.
Communication between iPhone, iPad, Apple Watch, HomePod, or Mac and the HomeKit- enabled camera Hub G3 is secured by HomeKit technology.

Warnings

• This product is NOT a toy. Please keep children away from this product.
• This product is designed for indoor use only. Do NOT use it in humid environments or outdoors.
• Beware of moisture, do NOT spill water or other liquids onto the product.
• Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation.
• Do NOT attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
• This product is only suitable for improving the convenience of your home life and reminding you about the status of your devices. It should NOT be
  used as security equipment for homes, buildings, warehouses, or any other places. If a user violates the product use instructions, the manufacturer will NOT be liable for any risks and property losses.

Under normal use conditions, this equipment should be kept at a separation distance of at least 20 cm between the antenna and the body of the user.

Wi-Fi Operation
Frequency(2.4GHz)| 2412-2472 MHz
---|---
Wi-Fi Operation
Frequency(5GHz)| CH36-CH48 5150-5250 MHz
CH52-CH64 5250-5350 MHz
CH100-CH140 5470-5725 MHz
CH149-CH165 5725-5850 MHz
Wi-Fi Maximum Output Power| 5. 20 dBm
Zigbee Operation Frequency| 2405-2480 MHz
Zigbee Maximum Output Power| 5 13 dBm

EU Declaration of Conformity
Hereby, Lumi United Technology Co., Ltd declares that the radio equipment type Camera Hub G3, CH-H03 is in compliance with Directive  2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.aqara.com/DoC/.

UK Declaration of Conformity
Hereby, Lumi United Technology Co., Ltd declares that the radio equipment type Camera Hub G3, CH-H03 is in compliance with Directive 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696).
The full text of the UK declaration of conformity is available at the following internet address: http://www.aqara.com/DoC/.

WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

FCC ID: 2AKIT- CHH03
Federal Communications Commission (FCC) compliance statement:

1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) This device may not cause harmful interference.
   (2) this device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.|
RF Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC: 22635- CHH03
IC NOTICE TO CANADIAN USERS
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1.  This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES‐003.
This device complies with RSS‐247 of Industry Canada.
Operation is subject to the condition that this device does not cause harmful interference.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.
Online Customer Service: www.aqara.com/support
Email: support@aqara.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>