NEXSENS CB-Series Buoy Radar Reflector Instruction Manual
- June 6, 2024
- NEXSENS
Table of Contents
CB-SERIES BUOY RADAR REFLECTOR
INSTALLATION INSTRUCTIONS
Note: Install the radar reflector and other top-side mounts before installing the solar tower on the buoy.
Figure 1: CB-Series Buoy Radar Reflector
Installation on NexSens Solar Tower
1. Locate the (4) threaded inserts on top of the CB series solar tower outlined by the red rectangles in the schematic below.
Figure 2 : Radar reflector mounting points on the CB-Series solar tower.
2. Align the (4) holes at the base of the radar reflector with the mounting points.
Figure 3 : Radar reflector mounting alignment.
3. Place a bolt with a lock washer and flat washer into each mounting point.
a. Tighten down the bolts with a 7/16” socket wrench.
Figure 4:
Securing the radar reflector.
2091 Exchange Court
Fairborn, Ohio 45324
937-426-2703
www.nexsens.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>