Lepro PR902103-US Smart Bedside Lamp User Manual

Lepro PR902103-US Smart Bedside Lamp

Features And Usage

Turn on the bluetooth on your phone.

Make sure the indicator light blinks rapidly (twice a second). Otherwise long press the timer button for at least 5 seconds to reset the light and wait until it blinks rapidly.

If the light does not work, please go to Amazon Alexa or Google Home APP and click DISCOVER DEVICES.

Automation & Timer (Optional).

1. Type-C Power Supply Port
2. Power Button
3. Modes
4. Function Indicator
5. Timer/WiFi Pairing Button

Short press to turn on and off the lamp.

Short press to select lighting modes.

Adjust mode settings by long pressing the power button.

White light: Long press to adjust brightness.

Static color mode: Long press to select from a total of 7 colors.Dynamic color mode: Long press to select from a total of 3 levels of color changing speed.

Short press to set the time successively 30 minutes, 60 minutes and turn off the timer. The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

LIGHT FEATURES:

1. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
2. This light source is only for use in applications requiring high-quality coloured light. Use of this light source will lead to increased energy cost compared to an equivalent more energy efficient product.
3. Colour-tuneable light sources with a minimum excitation purity of:
4. In the timing state, all key functions take effect normally.
5. When the indicator is off, the timing function is off.
6. The initial setting is white light, the color temperature is 4000K, the brightness is 60%, the timing function is off, and the white indicator light is always on.
7. When the timing function is on, the indicator turns green and stays green. In the network pairing state, the function indicator flashes green rapidly.
8. This product contains a light source of energy efficiency class .

LE Innovation Inc
3651 Lindell Rd Ste D, Las Vegas, NV 89103, USA
www.lepro.com +1 866-287-2558 cs.oc@lepro.com

Manufacturer / Hersteller:
LE Innovation Limited
One Spencer Dock, North Wall Quay, Dublin 1, D01 X9R7, Ireland
www.lepro.de +49 800-723-6202 cs.oc@lepro.de

UK Importer:
Lighting EVER Ltd.
93 Addy House, Rotherhithe New Road,
London, SE16 2PD, United Kingdom
www.lepro.co.uk +44 800-802-1244 cs.oc@lepro.co.uk

FCC

Federal Communication Commission (FCC) Statement for Users Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation.
   NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>