REDSUB RS-BA-100 100W Bass Amplifier Head User Manual
- June 5, 2024
- REDSUB
Table of Contents
REDSUB RS-BA-100 100W Bass Amplifier Head
WARNING
- Do not open the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel
- Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock
- The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product
- No naked flame sources, such as lighted candles, should be placed on the product
- Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat build-up. The ventilation must not be impeded by covering the appliance with items such as newspapers, tablecloths, curtains etc.
- The mains plug is used to disconnect the appliance from the mains supply. Ensure that the mains outlet is easily-accessible and remove the plug from the main outlet if you notice any abnormality with the appliance.
INTRODUCTION
Thank you for purchasing the RedSub BA-100 100W Bass Amplifier Head. To help you get the most out of your new product, please read this manual carefully.
INSTRUCTIONS
- INPUT – For connecting your bass guitar.
- PASSIVE / ACTIVE SWITCH – For selecting which type of bass guitar you have.
- GAIN – Controls the amount of bass guitar signal that goes into the amplifier.
- CLIP LIGHT – Indicates when the signal has peaked.
- TONE – Changes the tone of the amplifier, MIN boosts low end, MAX boost treble.
- LOW – Adjusts the bass frequencies of the amplifier.
- MID LEVEL – Adjusts the selected mid-range frequency of the amplifier.
- MID FREQUENCY – Selects which area of the mid-range is boosted, 0 is low mid and 10 is upper mid-range.
- HIGH – Controls the treble frequencies of the amplifier.
- PRESCENCE – Adjusts the upper mid-range of the amplifier.
- BLEND – Blends the amount of FX signal coming from the effects loop.
- MASTER – Adjusts the overall output of the amplifier.
- AUX IN – Use this to receive connection from MP3 player, CD player, drum machine, etc. HEADPHONES – Headphone output for the amplifier.
- POWER – Turns the amplifier off or on.
- PARALLEL OUTPUT – 2x Mono ¼” Jack outputs, maximum output 120w @ 4 Ohms. BALANCED OUT – Sends out balanced signal from the amp via XLR.
- EFFECTS LOOP RETURN – Connects to the output of an effects unit.
- EFFECTS LOOP SEND – Connects to the input of an effects unit.
SPECIFICATIONS
- OUTPUT POWER – 100w
- MAX OUTPUT – 120w @ 4 Ohms
- DIMENSIONS – 45cm x 23cm x 20cm
- WEIGHT – 9kg
If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on +44 (0)330 365 4444 or info@gear4music.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>