ANKER A25M1 3 in 1 Pad MagGo Wireless Charging Station User Guide
- June 1, 2024
- Anker
Table of Contents
Live Charged.
Anker MagGo Wireless Charging
Station (3-in-1 Pad)
QUICK START GUIDE
A25M1 3 in 1 Pad MagGo Wireless Charging Station
Specifications
| Input | 12V – 3A / 15V – 2.66A |
|---|---|
| Output | 15W Max / 5W Max / 5W Max (Phone: 15W Max / Apple Watch: 5W Max / |
TWS:5W Max)
- This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
- Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger affect the charging speed, or cause overheating.
- Wireless charging products make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.
Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.
- The maximum ambient temperature during use of this product must not exceed 40°C.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator & your body.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement:
The equipment complies with IC Radiation exposure limits set forth for
uncontrolled environments.
This equipment should be installed and operated with a minimum distance of
10cm between the radiator and your body.
EU Declaration of Conformity
Hereby Anker Innovations Limited declares that this product is in compliance
with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.anker.com
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
TX/RX Frequency Range and Max Radiated H-Field(Only for EU and UK):
Phone: 110-148kHz; Max Radiated H-Field: 3.52 dBuA/m(@10m)
Phone: 360kHz; Max Radiated H-Field:-17.13 dBuA/m(@10m)
TWS: 110-148kHz; Max Radiated H-Field:-5.8 dBuA/m(@10m)
Apple watch: 326.5kHz; Max Radiated H-Field: -22.13dBuA/m(@10m)
Apple watch: 1.778MHz; Max Radiated H-Field: -27.14dBuA/m(@10m)
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Limited,
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
| **** | Indoor use only |
|---|---|
| **** | This symbol indicates that this product shall not be treated as |
household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
For tutorial videos, FAQs, manuals, and more information, please visit: Or scan the QR code below: https://support.anker.com
https://rainbowbridge.anker.com/qrscan?key=anker-221202
| @anker_official
@anker_jp
---|---
| @AnkerDeutschland
@AnkerJapan
@Anker
| @AnkerOcial
@Anker_JP
Product Number: A25M1
51005004349 V02
PAP Raccolta Carte
https://rainbowbridge.anker.com/qrscan?key=Anker_A25M1_UG
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>