BOSS BRRF46A 45 Inch ATV UTV Audio System User Manual
- June 6, 2024
- Boss
Table of Contents
BRRF46A 45 Inch ATV UTV Audio System
BRRF46A
BRRF40A 1 – BRRF46A Soundbar Speaker System 1 – 1.50″ Rollbar Mounting Kit
BRRF46A BRRF46A
BRRF46A
BRRF46A
1 23 4
67
5
DOME LIGHT ON/OFF -(Auto 10 minute timer when BRRF46A
ACC is turned OFF;)
6
4
BRRF46A
BRRF46A BRRF46A
BRRF46A BRRF46A
To avoid potential shorts in the electrical system, be sure to disconnect the () battery cable before installation. Use this unit with a 12-Volt battery and negative grounding only. Failure to do so may result
BRRF46A
BRRF46A BRRF46A
this product. To avoid short-circuiting, cover any disconnected leads with
insulating tape. It is especially important to insulate any unused wires,
which if left uncovered may cause a short circuit. When connecting other
devices to this product, refer to the manual for the product to be connected.
The black cable is ground, make sure
to metal parts of the vehicles body frame or direct to the battery if you4r
vehicle
does not have a grounded chassis frame.The ground wire of this units power amp
and a second powered system must be connected to the frame separately with
BRRF40A
BRRF40A
BRRF40A
BRBRRFR40FA46A
12
4
7
BRRF46A
BRRF40A
A
1
2
3
10
4
9
5
8
6
7
BRRF46A can play audio from any device that has a
3.5mm headphone audio jack.
(Cable not included)
INSERT
BRRF46A
BRRF46A