ZeNS ZEDC08B/ZEDC09G Liberty Wireless Charger Glass User Manual

June 6, 2024
ZeNS

ZeNS logo

ZeNS ZEDC08B/ZEDC09G Liberty Wireless Charger Glass

ZeNS ZEDC08B ZEDC09G Liberty Wireless Charger Glass
image

In the packaging

  • ZENS Liberty wireless charger
  • USB-C cable and power adapter
  • Cleaning cloth (only applicable to ZENS Liberty Glass Edition
  • Quick install guide
  • User manual
  • Extended warranty registration card

Active charging area
Together, the 16 charging coils of the Liberty constitute the active charging area. For optimal performance, it is recommended to place the device(s) in the middle of the active charging area. At most, two devices can be placed and recharged on the active charging area simultaneously.
ZeNS ZEDC08B ZEDC09G Liberty Wireless Charger Glass
fig1

Meaning of the LED light

The two LED lights on the back of the Liberty charger indicate the following:

  • Off: no charging
  • On: charging device(s)
  • Blinking: no charging / non-Qi device detected

A blinking light may indicate that one of the safety features is activated, such as Foreign Object Detection (FOD). FOD is an embedded safety mechanism that automatically stops charging if there is interference caused by a foreign object such as metal (e.g. coins, paperclips, bankcards). In this case, please remove any of these objects before charging.

Compatibility
The Liberty works with any device that supports Qi wireless charging and also with most lightweight cases (< 3 mm thick). Any cases with a metal lining or metal inside (e.g. magnets, bankcards, etc.) need to be removed before charging.

Usage of the power adapter
The Liberty comes with a US power adapter and two separate adapter attachments; one for EU and one for UK power sockets. If applicable, please adjust the power adapter for EU or UK sockets by adding the concerning attachment to the original US power adapter before connecting it to power.

Cleaning the glass surface (only applicable to ZENS Liberty Glass edition)
A microfiber cloth is included for cleaning the glass surface.

Questions or feedback? Let us know.
If you have any questions or feedback about the use of the Liberty, wireless charging or ZENS, please take a look at www.makezens.com or contact ZENS customer support via support@makezens.com.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the distance between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC radiation exposure statement
The device shall be used in such a manner that the potential for human contact normal operation is minimized. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
FCC Caution: any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Important safety notices

  • Keep the product away from water.
  • Do not place or store the product near water or any other liquid.
  • After cleaning, make sure the product is completely dry before you connect it to an electrical socket
  • Connect the power adapter of the wireless charger into a socket-outlet that is close by and is easy to disconnect from the mains source.
  • Any changes or modifications not approved by the responsible party for compliance could stop the user’s authority to operate this device.
  • This device complies with the radiation exposure limit set forth for uncontrolled environment. The device should be installed and operated with a minimum distance of 20 cm between radiator and your body. Frequency band in which the device operates is between 110 – 130 kHz.

Warning notifications

  • Check if the voltage indicated on the power adaptor or power plug corresponds to the local voltage before you connect the adapter to a power outlet.
  • Never use the charger, power adapter, power plug or USB cable if any of them is damaged in any way.
  • Only use the official power adapter, power plug or USB cable (supplied together with the charger). When an unofficial power adapter is used or an incorrect voltage us used for the charger, the light with blink rapidly and no charging will occur.
  • Do not place any metallic labels or any objects onto the charger.
  • Do not use the charger outdoors or near heated surfaces.
  • If you have a pacemaker or other implanted device, consult your doctor or the manufacturer of the implanted device before using the charger.
  • Do not use with an extension cord or overload electrical outlets.
  • Supervision is needed when used by or near children, disabled persons or those with mental disabilities.

Return policy / ZENS warranty

Dear customer
All ZENS products are designed and manufactured to meet the highest standards and deliver high-quality performance. In case you encounter any difficulties when using your product, we recommend that you first consult this user manual or the information in the support section of www.makezens.com.
In the unlikely event of failure during the warranty period ZENS will arrange for your product to be serviced.

Warranty terms
The warranty begins on the date of purchase and expires after 24 months. If any defect due to faulty materials and/or workmanship occurs within the warranty period, ZENS will make arrangements for service. Where a repair is not possible or is deemed uneconomical ZENS may agree to replace the product. Replacement will be offered at ZENS discretion and the warranty will continue from the date of original purchase. The ZENS warranty applies provided the product has been handled properly for its intended use and in accordance with the operating instructions.

The warranty does not cover for the losses consequent in nature, including but not limited to loss of data or loss of business. The ZENS Warranty does not apply if:

  • The purchase documents have been altered in any way or made illegible.
  • The model- and/or serial number on the product has been altered, removed or made illegible.
  • Repairs or product modifications and alterations have been carried out by unauthorized service organizations or persons.
  • The product is being used for commercial purpose.
  • The defect is caused by abuse or misuse of the product or by environmental conditions that are not in conformance with the recommended operations of the product.
  • The unit has been damaged – including but not limited to damage by pets, lightning, abnormal voltage, water or fire, natural disaster or transport accident.
  • The product is defective due to wear of parts, which can be considered as consumable parts by their nature
  • The product does not function properly because it was not originally designed, manufactured, approved and/or authorized for the country where you use the product, which might occur in instances where the product has been purchased in another country other than that of its intended use.

This warranty gives you specific legal rights. As this might vary from country to country some of above
might not apply to you.

This warranty is only valid in the country were the product is purchased and is not transferable and
does not extend to users other than the original purchaser.

Service needed?
In order to avoid unnecessary inconvenience, we advise you to read the user manual or consult the support section on www.makezens.com before contacting ZENS. If service is required do not return the product without first contacting ZENS. To get this product repaired or replaced, please contact ZENS during the warranty period by email (support@makezens.com) and include the following details: email address, name, address, telephone number, date and place of purchase, detailed description of the problem.

If the problem appears to be based on a defect in workmanship or materials, ZENS will provide a return form and instructions which authorizes to return the product. Return shipments are at the customer’s expense, and the return must be accompanied by the original proof of purchase. ZENS is not responsible for lost or damaged product during shipment. Any product returned without the original proof of purchase will be returned at the customer’s expense. All returns must include the original packaging and all items like product, power adapters and user manual.

After examination of the problem the product will be repaired or replaced and sent back to the address indicated on the return form.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals