zens ZEDC05B Dual + Watch Wireless Charger User Manual

: June 6, 2024
: ZeNS

Table of Contents

zens ZEDC05B Dual + Watch Wireless Charger
In the packaging
Important safety notices
Return policy / Zens warranty
North America – FCC statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

zens ZEDC05B Dual + Watch Wireless Charger

In the packaging

Dual+Watch wireless charger
User manual
Extended warranty registration card

Quick start in 4 steps

Meaning of the LED light
The two LED lights indicate the following:

Oﬀ: no charging
On: charging device(s)
Blinking: no charging / non-Qi device detected

A blinking light may indicate that one of the safety features is activated, such as Foreign Object Detection (FOD). FOD is an embedded safety mechanism that automatically stops charging if there is interference caused by a foreign object such as metal (e.g. coins, paperclips, bankcards). In this case, please remove any of these objects before charging.

Compatibility

The wireless charging pad works with any device that supports Qi wireless charging and with most lightweight cases (< 3 mm). Any cases with metal inside (e.g. magnets, bankcards, etc.) or a metal lining need to be removed before charging. The Apple Watch module works with all Apple Watches.

Questions or feedback? Let us know.

If you have any questions or feedback about the use of the charger, wireless charging or Zens, please take a look at www.makezens.com or contact Zens customer support via support@makezens.com.

Important safety notices

Keep the product away from water.
Do not place or store the product near water or any other liquid.
After cleaning, make sure the product is completely dry before you connect it to an electrical socket

Warning notifications

Check if the voltage indicated on the power adaptor or power plug corresponds to the local voltage before you connect the adapter to a power outlet.
Never use the charger, power adapter, power plug or USB cable if any of them is damaged in any way.
Only use the oﬀicial power adapter, power plug or USB cable (supplied together with the charger). When an unoﬀicial power adapter is used or an incorrect voltage us used for the charger, the light with blink rapidly and no charging will occur.
Do not place any metallic labels or any objects onto the charger.
Do not use the charger outdoors or near heated surfaces.
If you have a pacemaker or other implanted device, consult your doctor or the manufacturer of the implanted device before using the charger.
Do not use with an extension cord or overload electrical outlets.
Supervision is needed when used by or near children, disabled persons or those with mental disabilities.

Return policy / Zens warranty

Dear customer,
All Zens products are designed and manufactured to meet the highest standards and deliver high-quality performance. In case you encounter any diﬀiculties when using your product, we recommend that you first consult the user manual or the information in the support section of www.makeZens.com. In the unlikely event of failure during the warranty period Zens will arrange for your product to be serviced.

Warranty terms
The warranty begins on the date of purchase and expires after 24 months. If any defect due to faulty materials and/or workmanship occurs within the warranty period, Zens will make arrange-ments for service. Where a repair is not possible or is deemed uneconomical Zens may agree to replace the product. Replacement will be oﬀered at Zens discretion and the warranty will continue from the date of original purchase. The Zens warranty applies provided the product has been handled properly for its intended use and in accordance with the operating instructions. The warranty does not cover for the losses consequent in nature, including but not limited to loss of data or loss of business. The Zens Warranty does not apply if:

The purchase documents have been altered in any way or made illegible.
The model- and/or serial number on the product has been altered, removed or made illegible.
Repairs or product modifications and alterations have been carried out by unauthorized service organizations or persons.
The product is being used for commercial purpose.
The defect is caused by abuse or misuse of the product or by environmental conditions that are not in conformance with the recommended operations of the product.
The unit has been damaged – including but not limited to damage by pets, lightning, abnormal voltage, water or fire, natural disaster or transport accident.
The product is defective due to wear of parts, which can be considered as consumable parts by their nature
The product does not function properly because it was not originally designed, manufactured, approved and/or authorized for the country where you use the product, which might occur in instances where the product has been purchased in another country other than that of its intended use.

This warranty gives you specific legal rights. As this might vary from country to country some of above might not apply to you.
This warranty is only valid in the country were the product is purchased and is not transferable and does not extend to users other than the original purchaser.

Service needed?
In order to avoid unnecessary inconvenience, we advise you to read the user manual or consult the support section on www.makeZens.com before contacting Zens. If service is required do not return the product without first contacting Zens. To get this product repaired or replaced, please contact Zens during the warranty period by email (support@makeZens.com) and include the following details: email address, name, address, telephone number, date and place of purchase, detailed description of the problem. If the problem appears to be based on a defect in workmanship or materials, Zens will provide a return form and instructions which authorizes to return the product. Return shipments are at the customer’s expense, and the return must be accompanied by the original proof of purchase. Zens is not responsible for lost or damaged product during shipment. Any product returned without the original proof of purchase will be returned at the customer’s expense. All returns must include the original packaging and all items like product, power adapters and user manual. After examination of the problem the product will be repaired or replaced and sent back to the address indicated on the return form.

CE-Declaration
We, Zens B.V., declare under our sole responsibility that the radio equipment wireless charging device, ZEDC05B/ZEDC05W, is in compliance with Directive 2014/53/EU, and RoHS Directive 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.makezens.com/mediaroom/products/.

Waste Electrical and Electronic Equipment Directive
Waste Electrical products should not be disposed of with household waste. All electronic products with the WEEE logo must be collected and sent to approved operators for safe disposal or recycling. Please recycle where facilities exist. Many electrical/electronic equipment retailers facilitate ‘Distributor- take-back scheme’ of household WEEE. Check with your local authority or retailers for Designated Collection Facilities (DCF) where consumers may dispose of their WEEE free of charge

North America – FCC statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY Hereby, Zens B.V. declares that the device, ZEDC05B/ZEDC05W complies with Part 15 of the FCC Rules.

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC radiated Exposure Statement: This devices complies with FCC radiated exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located operating in conjunction with any other antenna or transmitter. During operation the user must keep a minimum separation distance of 20 cm with RF devices.

Radio frequency range: 110-205 kHz
Radio frequency range (watch): 326.5 kHz
Max. RF power transmitted: 23.19 dBμA/m @3m distance
Max. RF power transmitted (watch): 2.25 dBμA/m @3m distance

Manufacturer; Luxshare Precision Industry Co., Ltd, Floor 2, Block A, Sanyo New Industrial Area, West Haoyi Community, Shajing Subdistrict Oﬀice, Bao’an District, Shenzhen, P. R. China