Zens Empowering Freedom Liberty Built In Wireless Charger Glass Installation Guide
- June 13, 2024
- ZeNS
Table of Contents
- Zens Empowering Freedom Liberty Built-In Wireless Charger Glass
- Product Information
- Product Usage Instructions
- The top side of the surface
- Inserting the Liberty built-in
- Included items
- Required tools
- INSTALLATION INSTRUCTION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Zens Empowering Freedom Liberty Built-In Wireless Charger Glass
Product Information
The Liberty built-in is a charging device designed to be installed into a surface, allowing you to charge multiple devices simultaneously. It is manufactured by Zens B.V. and assembled in China.
Included Items
- a Liberty built-in
- b Power adapter
- c Mounting set
- d Installation mold
Required Tools (not included)
- e Jigsaw
- f Screwdriver
- g Pencil or pen
- h Measuring tool
Product Usage Instructions
Installation Guide
The top side of the surface
- Position the mold on the top side of the surface.
- Draw the shape to indicate the position of the charger.
The bottom side of the surface
- Use the jigsaw and follow the drawn lines to cut out the correct shape.
Inserting the Liberty built-in
- Insert the Liberty in the opening from above. Important: Leave no gap between the product and the surface.
- Use the four screws to fasten the Liberty built-in in the recess.
Connecting the Power
- Connect the adapter cable to the input of the Liberty built-in.
- Secure the cable in the cable tray of the Liberty built-in.
- Use the cable clips to neatly secure the cable on the surface.
- Connect the power adapter to the nearest power socket.
Enjoy charging all your devices with the Liberty built-in.
Included items
Required tools
(not included)
INSTALLATION INSTRUCTION
- Position the mold on the top side of the surface.
- Draw the shape to indicate the position of the charger.
- Use the jigsaw and follow the drawn lines to cut out the correct shape.
- Insert the Liberty in the opening from above.
- Important: Leave no gap between the product and the surface.
- Use the four screws to fasten the Liberty built-in in the recess.
- Connect the adapter cable to the input of the Liberty built-in.
- Secure the cable in the cable tray of the Liberty built-in.
- Use the cable clips to neatly secure the cable on the surface.
- Connect the power adapter to the nearest power socket.
Enjoy charging all your devices with the Liberty built-in.
- All rights reserved. Zens is a trademark of Zens B.V.
- Designed in the Netherlands. Assembled in China.
- Zens B.V., High Tech Campus 85, 5656 AG Eindhoven, NL
References
Read User Manual Online (PDF format)
Loading......