ERA Protect SCAINDC1080 Internal 1080HD Camera User Guide
- June 6, 2024
- ERA PROTECT
Table of Contents
- ERA Protect SCAINDC1080 Internal 1080HD Camera
- WHAT’S IN THE BOX
- EXPLORING YOUR CAMERA
- GETTING THE BEST FROM YOUR INDOOR CAMERA
- ERA INDOOR CAMERA PLACEMENT TIPS
- SETTING UP YOUR CAMERA
- SPECIFICATIONS
- FACTORY RESET
- ERA PROTECT PRODUCT GUARANTEE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ERA Protect SCAINDC1080 Internal 1080HD Camera
ABOUT YOUR INDOOR WIFI CAMERA
See and hear what’s happening inside your property from anywhere, on your smartphone or tablet. Your ERA Protect Indoor Camera alerts you when motion is detected. Watch live or review recordings in the cloud.
SAFE & SECURE
Your camera is protected using 128 bit SSL security encryption. Even if your
camera is vandalised or stolen, your video clips are stored in the ERA cloud.
Save your clips for 30 days by upgrading to ERA Protect Plus.
EASY TO USE
Your camera can be accessed using the ERA Protect app on your smartphone or
tablet. You can also use the app to control your ERA Protect Alarm, Cameras,
Doorbell or on its own. The settings are intuitive and adjustable to your own
requirements.
WHAT’S IN THE BOX
EXPLORING YOUR CAMERA
GETTING THE BEST FROM YOUR INDOOR CAMERA
Questions you may want to consider
What do I want to see in the field of view?
What kind of scenarios do I want to trigger a motion recording?
When do I want to have motion recorded?
Do I want a notification sent to me when motion recording is triggered ?
Make sure when setting up your Camera, you:
- Position the Camera securely facing what you want to see.
- Ensure the motion detection set up matches your needs.
ERA INDOOR CAMERA PLACEMENT TIPS
- We recommend placing the camera no further than 10m/30ft away from your router; closer if there are obstacles in the way such as walls, doors or ceilings.
- Outside of this range, we recommend using a WiFi signal extender or repeater.
- The ERA Protect Indoor Camera is only compatible with the 2.4 GHz WiFi frequency.
- Make sure your camera is securely attached to the magnetic stand.
- Ensure the Camera is properly attached to the supplied stand before final installation and positioning.
- Compliance is only assured by using the included power supply.
MOTION ALERT & NOTIFICATION TIPS
Your ERA Protect Indoor Camera uses a sophisticated motion algorithm which
detects when motion is happening, and can alert you instantly by push
notification.
To receive alerts every time motion is detected*, you may wish to consider the
following tips so that you achieve the best results and reduce the number of
false alerts:
Active pets (or children!) may trigger the motion recording.
Movements near busy doors or windows may set off multiple notifications.
Depending on the location of the camera, you may trigger motion alerts due to
reflections, shadows or sunlight.
You will not be able to use night vision if your camera is positioned to look
through glass.
In order to avoid multiple alerts for the same event, you will only receive an alert once every 15 minutes (per Camera).
SETTING UP YOUR CAMERA
It is important your ERA Indoor Camera Set up is configured according to your individual requirements. Once you have completed the set up process it is advisable to test the camera to ensure it is working.
-
Camera Location
If your chosen location for the camera is a wall. Attach the metal plate to the wall either vertically or horizontally where you want to position your camera. -
Attach the stand
Attach the stand to the magnet connector on the rear of the camera. -
Attach the power cable to the rear of the camera, and plug the power supply into a power socket and turn on.
LED STATUS
SPECIFICATIONS
Power Requirements: 5V DC Power Adapter Supplied
Night Vision: LED’s with IR Cut switcher up to 6m
Viewing Angle: 86º Horizontal / 46º Vertical
Image Quality: H.264 High profile, 1/3″ CMOS Sensor,Full
HD (1920*1080P)
Connectivity: Wi-Fi 802.11 b/g/n 2.4GHz
Size (LxWxH) & Weight: 65 x 112 x 33mm; 300g
Create your account by downloading the ERA Protect iOS or Android app
Download the ERA Protect app on your smartphone (search for “ERA Protect”
on Google Play or the iOS App Store) then follow the steps on the screen.
If you’re having problems finding the app please scan the QR code below with
your smartphone.
Go to page 12 step 4 once you have set up your account
SETTING UP YOUR INDOOR CAMERA
-
Power on the camera.
-
Wait for the camera to boot up, and then the status LED to pulse three times.
-
Go to the ERA Protect app, and select Add new from the Camera dashboard.
-
Select the ERA Protect Indoor Camera.
-
Follow the steps to connect the camera to your Wi-Fi network.
If the Wi-Fi set up fails, then you will need to put the camera into Pair mode. Please follow the steps below to do this: -
Using reset pin, press the reset button for 5 seconds. The reset button is located on the underneath of the camera.
-
The camera will start booting up.
-
You can continue with the set up, once the status led starts pulsing three times.
FACTORY RESET
To factory reset your Camera, please do the following:
- Open the ERA Protect app.
- From the menu select Settings.
- Choose your Camera.
- Scroll to the bottom, and press Delete Camera.
- Press OK to confirm you want to delete the Camera.
- Close the app.
- Using the Reset Pin, press the reset button down for 5 seconds. The reset button is located on the underneath of the camera.
- Once the Status LED’s pulses three times the camera is reset.
NEED SUPPORT?
Your ERA product is designed to be up and running in minutes.
Please contact us for assistance or support. A more detailed installation and
operation manual is available on our website.
Visit www.eraprotect.com
or phone us 0345 257 2500
ERA PROTECT PRODUCT GUARANTEE
We at ERA firmly believe in the quality of our goods. Our technology achieves outstanding performance and durability and we can therefore offer, in addition to your statutory rights, an additional limited guarantee. In the event of any material defects in any product manufactured by us due to faulty design, materials and/or workmanship, and which arise following correct installation and during normal use in accordance with our instructions, as included in the product packaging, within the period of two years from the date of purchase, we will either repair, provide a replacement, substitute with equivalent product free of charge from our then current range or refund in full the amount paid for the product at point of purchase.
CONDITIONS
In order to take advantage of our guarantee, you must comply within the
following conditions:-
- This limited guarantee is not transferable and is extended only to, and is solely to the benefit of, the original purchaser of the product. Please retain your dated sales invoice as proof of purchase and forward this to us if you wish to make a claim under this guarantee.
- Products must be installed, used and maintained in accordance with our instructions otherwise the guarantee will be invalidated.
- The product must not be damaged or modified in any way nor must it have been subjected to any unauthorised repairs.
EXCLUSIONS
A full list of exclusions can be found within the full product guarantee, as
detailed on our website www.eraprotect.com. This
guarantee is in addition to your contractual and statutory rights and does not
affect your statutory rights.
TO MAKE A CLAIM
Please contact Customer Support either by telephone on 0345 257 2500 or email
support@eraprotect.com with full details of your
claim. If your claim satisfies our Conditions and is not subject to any of our
Exclusions, we will agree with you repair, replacement, substitution or refund
of payment of goods. For full details of the claims process, please visit our
website. *Terms and conditions apply.
RECYCLING AND DISPOSAL
Disposal of this product is covered by the Waste Electrical or Electronic
Equipment (WEEE) Directive. It should not be disposed of with other household
or commercial waste. At the end of the product’s useful life, the packaging
and product should be disposed of via a suitable recycling centre.
EC DECLARATION OF CONFORMITY
ERA hereby declare that this equipment complies with the essential
requirements of the Radio and Telecommunications Terminal Equipment Directive
2014/53/EU. A copy of the EU Declaration of Conformity is available at
www.eraprotect.com.
All devices, with the exception of the External Siren are suitable for
mounting in dry interior locations only.
© ERA Home Security Limited. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed. App Store is a
service mark of Apple Inc. Android and the “Google Play” logo are trademarks
of Google Inc. Phone not included.
ERA Home Security Ltd Valiant Way, Wolverhampton, West Midlands, WV9 5GB
Customer Helpline: 0345 257 2500
www.eraprotect.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>