ERA PROTECT SALAPWHREM Remote Control User Manual
- June 7, 2024
- ERA PROTECT
Table of Contents
ERA PROTECT SALAPWHREM Remote Control User Manual
1. OVERVIEW
The Wireless Remote control enables you to Arm & Disarm the alarm system before entering the building or after exiting.
Home Mode allows for arming or disarming selected sensors when there is a need for free movement in specific areas of the building.
The Plus button provides customisable functionality (for Plus Subscription customers only).
2. GET TO KNOW YOUR PRODUCT
3. LED INDICATION
Flashes Once: Transmits signal
Dim light level: Low battery indication, change the battery
4. PAIRING A REMOTE CONTROL
Once your hub is set up you will be taken to your Protect home screen.
To add a device press the Add ( + ) button in the top right hand corner and select Remote.
Follow the on-screen instructions and enter the code from the back of the remote control or scan the QR code.
You can check it has been added by going into settings menu from the Alarm Settings page accessible by the side bar menu ( = ).
5. NAMING YOUR SENSOR
From the Alarm Settings page, you can see a list of the installed sensors and remotes. Click on the remote control you want to rename and then click ‘rename sensor’.
6. SPECIFICATION
7. BUTTONS/ FUNCTIONS
ERA Home Security Ltd.
Valiant Way, Wolverhampton,
West Midlands, WV9 5GB.
Email: support@eraprotect.com
Web: www.eraprotect.com
CUSTOMER HELPLINE
0345 257 2500
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>