TESLA OSK102 Split-Type Air Conditioner User Manual
- June 6, 2024
- Tesla
Table of Contents
SPLIT-TYPE
AIR CONDITIONER
SMART KIT
USER MANUAL
Read the manual carefully before installing or connecting your Smart kit(Wireless module). Make sure to save this manual for future reference.
DECLARATION OF CONFORMITY
Hereby, we declare that this Smart kit is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the full DoC is attached. (European Union products only)
SPECIFICATION
Model: OSK102,EU-OSK103,US-OSK103
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency : WLAN 2400~2483.5 MHz
Operation Temperature:0 C~45 C/32 F~113 F
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum Transmitted Power: 19.8dBm Max
PRECAUTIONS
Applicable system : iOS, Android. (Suggest: iOS 8.0 or later, Android 4.0 or later)
-
Please keep you APP up to date with the latest version. Due to the special situation that may be occurred, we explicitly claim below: Not all of the Android and iOS system are compatible with APP. We will not be responsible for any issue as a result of the incompatibility.
Wireless safety strategy -
Smart kit only support WPA-PSK/WPA2-PSK encryption and none encryption . WPA- PSK/WPA2-PSK encryption is recommended.
Cautions -
Due to different network situations, the control processes may return time-out sometimes. If this situation occurs, the display between board and App may not be the same, please do not feel confused.
-
Smart Phone camera needs to be 5 million pixels or above to make sure scan QR code well.
-
Due to different network situations, sometimes, request time-out could happen, thus, it is necessary to do network configuration again.
-
The APP system is subject to update without prior notice for product function improvement. The actual network configuration process may be slightly different from the manual, the actual process shall prevail.
-
Please Check The Service Website For More information.
DOWNLOAD AND INSTALL THE APP
CAUTION: The following QR Code is only available for downloading APP. It is totally different with the QR code packed with SMART KIT.
https://itunes.apple.com/us/app/nethome-
plus/id1008001920?l=zh&ls=1&mt=8
https://play.google.com/store/apps/details?id=com.midea.aircondition
• Android Phone users: scan Android QR code or go to google play, search the
‘NetHome Plus” app and download it.
• iOS users: scan iOS QR code or go to APP Store, search ‘NetHome Plus” app
and download it.
INSTALL THE SMART KIT (WIRELESS MODULE)
- Remove the protective cap of the smart kit (wireless module)
- Open the front panel and insert the smart kit (wireless module) into the reserved interface.
- Attach the QR code packed with Smart kit (wireless module) to the side panel of the machine, ensuring it is convenient to be scanned by the mobile phone. Alternatively, users can take pictures of the QR Code and save it into their own phones.
WARNING : This interface is only compatible with SMART KIT(wireless module) provided by the manufacturer.
USER REGISTRATION
- Please ensure your mobile device is connected to Wi-Fi router. Also, the Wireless router has already connected to the Internet before doing user registration and network configuration.
- It is better to log in your email box and active your registration account by clicking link in case you forget the password. You can log in with the third-party accounts.
NETWORK CONFIGURATION
Cautions
- It is necessary to forget any other around the network and make sure the Android or iOS device just connects to the Wireless network you want to configure.
- Make sure the Android or iOS device Wireless function works well and can be connected back to your original Wireless network automatically.
Kindly reminder:
The user must finish all the steps in 8 minutes after powering on air conditioner, otherwise, you need to power on it again. Using Android device to do network configuration
- Make sure your mobile device has already been connected to the Wireless network which you want to use. Also, you need to forget another irrelevant Wireless network in case it influences your configuration process.
- Disconnect the power supply of air conditioner.
- Connect the power supply of AC, and continuously press the “ LED DISPLAY” or “DO NOT DISTURB” button seven times in 10 seconds.
When the unit displays “AP”, it means that the air conditioner wireless has
already entered into “AP” Mode. • Some type of air conditioners do not need
step 2 to be in AP.
5. Press “ + Add Device ”
6. Select the appliance you are setting up
7. Follow the above steps to enter “AP” mode.
Using iOS device to
do network configuration
- Make sure your mobile device has already been connected to the Wireless network which you want to use. Also, you need to forget another irrelevant Wireless network in case it influences your configuration process.
- Disconnect the power supply of AC(some units).
- Connect the power supply of AC, and continuously press the “LED DISPLAY” button or “DO NOT DISTURB” button seven times in 10 seconds. When the AC displays “AP” , it means that the AC Wireless has already entered into the “AP” Mode.
5. Press “ + Add Device ”
6. Select the appliance you are setting up
7. Follow the above steps to enter “AP” mode.
NOTE:
- When finishing network configuration, APP will display success cue words on the screen.
- Due to different internet environment, it is possible that the device status still display “offline” . If this situation occurs, it is necessary to pull and refresh the device list on the APP and make sure the device status become “online” . Alternatively, user can turn off the AC power and turn on it again, the device status will become “online” after few minutes.
HOW TO USE APP
Please ensure both your mobile device and air conditioner are connected to the Internet before using app to control the air conditioner via internet, please follow the next steps:
NOTE:
Not all the function of the APP is available on air conditioner. For example: ECO, Turbo, Swing function, please check the user manual to find more information.
SPECIAL FUNCTIONS
Including Timer on, Timer off, 8ºC Heat, Sleep, Check.
NOTE : If the air conditioner do not support the above function, the
function will be hided from the function list.
Timer on/Timer off
Weekly, user can make an appointment to turn on or off AC on specific time.
User also can choose circulation to keep the AC under schedule control every
week.
8ºC Heat
User can let the AC run under 8ºC Heat by one-click. When people go outside,
this function can protect your furniture from frost damage.
Sleep
User can customize their own comfortable sleep by setting target temperature.
Check
User can simply check the AC running status with this function. When finishing
this procedure, it can display the normal items, abnormal items, and detail
information.
Share Device
The air conditioner can be controlled by multi-users at the same time by Share
Device function.
