CRYSTAL AUDIO PBK-10 Power Bank 10.000 mAh User Manual
- June 6, 2024
- CRYSTAL AUDIO
Table of Contents
PBK-10
POWER BANK
10.000 mAh
User Manual
Contents
Warranty:
The product has a 1-year warranty starting from the purchase date and is only valid with the proof of purchase (receipt or invoice). The warranty covers only the repair or replacement of the device and is effective only in Greece.
Overview
| 1. On/Off button and LED Battery Indicator
2. Micro USB IN (2.1A)
3. Type C IN (2.1A)
4. Lightning IN (1.5A)
5. USB1 OUT (1A)
6. USB2 OUT (2.1A)
---|---
- Make sure the power bank is fully charged prior to use.
- Please use the provided USB to Micro USB cable to charge the power bank. Using other cables may significantly reduce the charging speed.
- Charge two USB devices at the same time using the two standard USB OUT ports (2.4A max. Output).
- Re-charge the power bank using the Micro USB (2.1A), Type C (2.1A), or Lightning (1.5A) IN ports.
- Press the ON/OFF button (side button) and the LED Indicator will display the battery status. Each one of the 4 led lights represents 25%, 50%, 75%, and 100% of battery capacity respectively. When all 4 led lights are lit up, the battery is fully charged.
- Switch off the power bank by double-clicking the ON/OFF button.
Charging
Warning:
- Do not dispose of your power bank in the fire. The battery may explode.
- Do not disassemble your power bank. There are no user-serviceable parts inside.
- Keep your power bank dry. Do not use it in a damp environment or immerse it in water or other liquids.
- Keep your power bank away from corrosive materials like cleaning products.
- Keep your power bank away from heat sources like heaters, stoves, or extremely cold/hot environments.
- Do not drop or hit your power bank against hard objects. You may damage your power bank.
- If you have not used your power bank for more than two months, recharge the battery before using it.
- The power bank is designed to work only with devices with a 5V DC power input.
Specifications
| Capacity: | 10.000mAh – 3.7V/37Wh |
|---|---|
| Input: | Lightning 5V/1.5A |
Micro 5V/2.1A – Type C 5V/2.1A
Output (2.4A max.):| USB1 5V/1A – USB2 5V/2.1A
Protection System:| ¹Over-charge/discharge,
² Reset,³ Over-voltage,
⁴Over-current,
⁵ Anti-reverse,
³Over-heating,
⁵Anti-reverse,
⁷Over-power,
⁸Short-circuit,
₉EMF.
Battery type:| Li-ion Polymer
Dimensions (L,W,H):| 141x72x15mm
Weight:| 2x15mm
¹Protects the battery cells from being over-charged/discharged
²Resets the device to its original state by pressing the power button
³Keeps both In & Out Voltage at a safe and constant rate
⁴Protects your device against sudden surges in current
⁵The circuit automatically turns off
⁶Protection against high temperature
⁷Protection against high temperature
⁸Protection against High Power Voltagethe event of a short-circuit
⁹the event of a short-circuit Protection in case of external electromagnetic
fields
DECLARATION OF CONFORMITY
Radio equipment and telecommunications terminal equipment, Directive
2014/53/EU Crystal Audio hereby declares that the product, BIE-02 Wireless
Headphones is in conformity with provisions of the Directive 2014/53/ΕU. The
complete text of the Declaration of conformity can be found on the following
webpage: www.CrystalAudio.com|
---|---
Designed in Europe by Crystal Audio- Assembled in China with the highest quality standards.