CRYSTAL AUDIO STUDIO1 Wireless Headphones User Manual

: June 6, 2024
: CRYSTAL AUDIO

Table of Contents

CRYSTAL AUDIO Studio1 Wireless Headphones User Manual
Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CRYSTAL AUDIO Studio1 Wireless Headphones User Manual

Studio1

Overview

Overview Continued

Charge it

Use the micro USB cable which is included in the package of the headphones.
A different micro USB cable might not be able to charge correctly (or even not at all) the battery of the headphones.

Connect:

the micro USB plug into the headphone’s USB port.
the USB plug into any compatible USB device.

Connect

LED Indication

Connect it

1

Push the On/Off button to the left or to the right to activate (or deactivate) the headphones.
Once turned on. the headphones enter automatically into Pairing mode

2

The indication light flashes red-blue, alternately.

3

Activate Bluetooth mode on your BT device.
Search for available devices and select CRYSTAL AUDIO STUDIO1.

4

The indication light turns permanently blue.
Connection is successful.

5

Push the ANC button (located on the left ear-cup) to the left or to the right to enable/disable Active Noise Cancelling mode.

!

Please turn the headphones off when not in use in order to preserve battery life.
The headphones will connect to the last paired device automatically as soon as you turn them on.
The headphones will be automatically turned off if they are not connected to a device within 3 minutes.

Use it

WARRANTY

The product comes with a 1-year warranty starting from the purchase date. Warranty is valid only with the original proof of purchase (receipt or invoice). This warranty covers only the repair or replacement of the device and it is effective only in Greece.

DECLARATION OF CONFORMITY

Radio equipment and telecommunications terminal equipment, Directive 2014/53/EU

Crystal Audio hereby declares that the product, STUDIO1 Wireless Headphones, is in conformity with provisions of the Directive 2014/53/EU. The complete text of the Declaration of conformity can be found on the following webpage: www.CrystalAudio.com

Technical Specifications

Drivers: 40mm
Sensitivity: 114dB
Impedance: 320
Freq. Response: 20Hz-20KHz
Bluetooth® Version: v5.0
Battery Capacity: 400mAh/3.7V
Charge Time: ≈2.5 hours
Talk/Playback Time:
(Vol.50%/ANC off/BT on) up to 20 hours
(Vol.50%/ANC on/BT off) up to 14 hours
(Vol.50%/ANC on/BT on) up to 10 hours
AUX/USB Cable Length: 120cm/60cm
Weight: 270g

WARNING

Using the headphones at a high volume for an extended period might lead to hearing damage.
This product is not a toy. Keep out of reach of children.
This product is not waterproof. It should be kept away from liquids and places of extreme humidity, rain, snow etc.
Low battery may lead to “Poor” or “Lost” Bluetooth connection.
Do not overcharge the battery of the device.
Avoid exposing the product to excessive heat sources such as fire, candles, radiators, direct sunlight etc.
This product should not be treated as household waste. Please hand over to the applicable collection point for the recycling of electronic equipment.

Designed in Europe by Crystal Audio –
Assembled in China with the highest quality standards.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc. and any use of such marks by Crystal Audio is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.

Compliance Icons