EQUINOX EQLED080 Pulse Tube Lithium User Manual
- June 6, 2024
- EQUINOX
Table of Contents
EQUINOX EQLED080 Pulse Tube Lithium User Manual
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!
- Before your initial start-up, please make sure that there is no damage caused during transportation.
- Should there be any damage, consult your dealer and do not use the equipment.
- To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
- Please note that damages caused by user modifications to this equipment are not subject to warranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.
-
Never let the power cable come into contact with other cables. Handle the power cable and all mains voltage connections with particular caution!
-
Never remove warning or informative labels from the unit.
-
Do not open the equipment and do not modify the unit.
-
Do not connect this equipment to a dimmer pack.
-
Do not switch the equipment on and off in short intervals, as this will reduce the system’s life.
-
Only use the equipment indoors.
-
Do not expose to flammable sources, liquids or gases.
-
Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling the power-cable.
-
Make sure that the available mains supply voltage is between 100~240V AC, 50/60Hz.
-
Make sure that the power cable is never crimped or damaged. Check the equipment and the power cable periodically.
-
If the equipment is dropped or damaged, disconnect the mains power supply immediately and have a qualified engineer inspect the equipment before operating again.
-
If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not connect power or switch it on immediately.
The arising condensation might damage the equipment. Leave the equipment switched off until it has reached room temperature. -
If your product fails to function correctly, stop use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Pro Light dealer for service.
-
Only use fuses of same type and rating.
-
Repairs, servicing and power connection must only be carried out by a qualified technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS. -
This lighting fixture is for professional use only – it is not designed for or suitable for household use. The product must be installed by a qualified technician in accordance with local territory regulations. The safety of the installation is the responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock and falls.
-
Warning! Risk Group 2 LED product according to EN 62471. Do not view the light output with optical instruments or any device that may concentrate the beam.
-
WARRANTY: One year from date of purchase.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this
manual, the product may suffer damage and the warranty becomes void. Incorrect
operation may lead to danger e.g: short-circuit, burns and electric shocks
etc.
Do not endanger your own safety and the safety of others! Incorrect
installation or use can cause serious damage to people and/or property.
Pulse Tube Lithium
The Pulse Tube Lithium is a colour changing LED effect that can be mounted
vertically, horizontally or free standing with the included easy fit feet. The
rechargeable lithium battery offers a run time of up to 12 hours from a single
charge, and with no power cables to connect you are free to set up the unit
wherever you want.
The tube will operate in chase, fade, static and sound active modes and is
supplied with a handy IR remote.
- 1m LED colour tube with UV resistant polycarbonate tubing
- 32 tri-colour SMD 5050 LEDs (RGB)
- Rainbow colour effect
- Includes handy IR remote for static colour with variable strobe, auto with rainbow effect and sound active modes
- Feet allow the tube to be stood vertically
- Rechargeable battery for wireless applications
- Maximum run time: up to 12 hours (single colour)
- Charging time: 5 hours (max.)
- Supplied with 12V DC charging adaptor
Specifications|
---|---
Power consumption| 8W
Power supply| 12V DC (by adaptor included)
Battery| 12V 2500mAh
Tube diameter| 50mm
Dimensions| 1002 x 220 x 200mm
Weight| 0.5kg
Order code| EQLED080
IR remote functions:
01 – Sets the unit into blackout off (LED on)
02 – Sets the unit into blackout on (LED off)
03 – Sets the static colour (see chart key for colours)
A – Red G – Amber
B – Green H – Cyan
C – Blue I – Magenta
D – Orange J – Yellow
E – Lime Green K – Purple/Blue
F – Pink L – White
04 – Runs the built-in programs, use the ‘+’ and ‘-’ buttons to go through the
programs and then the ‘Speed’ button followed by the ‘+’ and ‘-’ buttons to
adjust the program speed
05 – Runs the sound programs, use the ‘+’ and ‘-’ buttons to go through the
programs
06 – Sets the LEDs to flash, use the ‘+’ and ‘-’ buttons to change the flash
speed
07 – Sets the built in program speed. Press this button followed by the ‘+’
and ‘-’ buttons to adjust the program speed
08 – Adjusts the built-in programs and built-in program speed, sound program,
flash speed for static colour, brightness of static colour
Correct Disposal of this Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should
not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>