EQUINOX EQLED203 Super Boogie Prolight Concepts User Manual

October 31, 2023
EQUINOX

EQLED203 Super Boogie Prolight Concepts

Product Information

Product Name: Super Boogie

Order Code: EQLED203

Power Consumption: 72W

Power Supply: 100~240V, 50/60Hz

Fuse: F3A 250V

Dimensions: 277 x 265 x 240mm

Weight: 2.9kg

Manufacturer: www.prolight.co.uk

Product Usage Instructions

  1. Safety Advice:
  • Read the user manual carefully before starting to use the
    product.

  • Keep the equipment away from rain, moisture, and liquids.

  • Take care when using the equipment as it operates at high
    voltage and there is a risk of electric shock.

  • The manufacturer is not liable for any damages caused by not
    following the manual or making unauthorized modifications to the
    equipment.

  • Product Overview:

    • The Super Boogie is an effect light with super bright
      LEDs.

    • It provides extremely wide coverage and is suitable for both
      installation and mobile applications.

    • The light produces brilliant beams of color and offers
      versatile light shows.

    • The Super Boogie can be controlled via DMX or built-in show
      modes.

  • Technical Specifications:

    • Power consumption: 72W
    • Power supply: 100~240V, 50/60Hz
    • Fuse: F3A 250V
    • Dimensions: 277 x 265 x 240mm
    • Weight: 2.9kg
    • Order code: EQLED203
  • Operating Instructions:

    • DMX Mode:
    1. Press the MENU button to access the DMX address mode.

    2. Use the UP and DOWN buttons on the rear of the unit to display
      “Addr” on the LED display.

    3. Press the ENTER button to enter the DMX address setting.

    4. Use the UP and DOWN buttons to set the desired DMX
      address.

    5. Press the ENTER button to confirm the setting.

    6. To exit, press the MENU button.

  • DMX Channel Mode:

    1. Press the MENU button to access the DMX channel mode.

    2. Use the UP and DOWN buttons on the rear of the unit to display
      “Chnd” on the LED display.

    3. Press the ENTER button to enter the DMX channel mode
      setting.

    4. Use the UP and DOWN buttons to choose between 4 or 26 DMX
      channel modes.

    5. Press the ENTER button to confirm the setting.

    6. To exit, press the MENU button.

Super Boogie
User Manual
Order code: EQLED203

Safety advice

WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!
· Before your initial start-up, please make sure that there is no damage caused during transportation. · Should there be any damage, consult your dealer and do not use the equipment. · To maintain the equipment in good working condition and to ensure safe operation, it is necessary
for the user to follow the safety instructions and warning notes written in this manual. · Please note that damages caused by user modifications to this equipment are not subject to warranty.

CAUTION!
KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS

CAUTION!
TAKE CARE USING THIS EQUIPMENT!
HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.

· Never let the power cable come into contact with other cables. Handle the power cable and all mains voltage connections with particular caution!
· Never remove warning or informative labels from the unit. · Do not open the equipment and do not modify the unit. · Do not connect this equipment to a dimmer pack. · Do not switch the equipment on and off in short intervals,
as this will reduce the system’s life. · Only use the equipment indoors.

· If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not connect power or switch it on immediately. The arising condensation might damage the equipment. Leave the equipment switched off until it has reached room temperature.
· If your product fails to function correctly, stop use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Pro Light dealer for service.

· Do not sit the equipment on a flat surface as this can block the air intake to cool the LED.
· Do not expose to flammable sources, liquids or gases.
· Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling the power-cable.
· Make sure that the available mains supply voltage is between 100~240V AC, 50/60Hz.
· Make sure that the power cable is never crimped or damaged. Check the equipment and the power cable periodically.
· If the equipment is dropped or damaged, disconnect the mains power supply immediately and have a qualified engineer inspect the equipment before operating again.

· Only use fuses of same type and rating.
· Repairs, servicing and power connection must only be carried out by a qualified technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
· This lighting fixture is for professional use only – it is not designed for or suitable for household use. The product must be installed by a qualified technician in accordance with local territory regulations. The safety of the installation is the responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock and falls.
· Warning! Risk Group 2 LED product according to EN 62471. Do not view the light output with optical instruments or any device that may concentrate the beam.
· WARRANTY: One year from date of purchase.

OPERATING DETERMINATIONS
· If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.
· Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property.

www.prolight.co.uk

Super Boogie User Manual 2

Product overview & technical specifications

Super Boogie
The extremely wide coverage effect with super bright LEDs makes the Super Boogie ideal for both installation and mobile applications. Brilliant beams of colour along with versatile light shows make this effect impressive under both DMX and built-in show modes.
· 24 x 3W LEDs (R: 6, G: 6, B: 6, A: 6) · Beam angle: 78° · DMX channels: 4/6 or 26 selectable · Auto, sound active and master/slave modes · 0-100% dimming and variable strobe · IR remote control included · Supplied with mounting bracket · 4 push button menu with LED display · IEC power input/output · 3-Pin XLR input/output · Convection cooled

Specifications Power consumption Power supply Fuse Dimensions Weight Order code

72W 100~240V, 50/60Hz F3A 250V 277 x 265 x 240mm 2.9kg EQLED203

265mm

240mm 203mm 40mm

277mm 70mm

www.prolight.co.uk

Super Boogie User Manual 3

Technical specifications
01
02

www.prolight.co.uk
POWER INPUT: 100-240V~50/60Hz
FUSE: F3A 250V POWER CONSUMPTION: 72W
06
DMX INPUT
SAFETY ETE
03 07
04

MIC

08

05

POWER OUTPUT: 100-240V~50/60Hz

MENU UP DOWN ENTER

DMX OUTPUT

01 – Hanging bracket 02 – Adjustment knobs 03 – IEC power input 04 – Fuse F3A 250V 05 – IEC power output 06 – Safety eye
www.prolight.co.uk

11 10

09

07 – 3-Pin DMX input 08 – 3-Pin DMX output 09 – Microphone 10 – LED display 11 – Function buttons

In the box: 1 x fixture, 1 x power cable
& 1 IR remote

Super Boogie User Manual 4

Operating instructions

MENU

Addr CHnd SLnd SoUn AutO LEd d1sp

d1sp

A001
DMX address setting
A512
4Ch
Channel modes
26Ch
NASt S L 1 Master/ slave mode SL2
5 o 0 5 o 1 6 Sound active 5 e 0 5 e 9 9 Sound sensitivity
A u 0 A u 1 6 Auto modes S P 0 S p 9 Auto speed
oN
Display blackout
oFF
Display invert

t e s t Auto Test v e r v 1 0 Firmware Version

www.prolight.co.uk

Super Boogie User Manual 5

Operating instructions
DMX mode: Operating in a DMX control mode environment gives the user the greatest flexibility when it comes to customising or creating a show. In this mode you will be able to control each individual trait of the fixture and each fixture independently. To access the DMX address mode, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show Addr on the LED display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to set the required DMX address. Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button.
DMX channel mode: To access the DMX channel mode, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show Chnd on the LED display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to choose one of the 4 or 26 DMX channel modes. Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button.

4 Channel 1 2
3
6

26 Channel 1 2
3 4 5 6 7

Function

Master dimmer (0-100%)

No function

Strobe (slow-fast)

No function

Chase 01

Chase 02

Chase 03

Chase 04

Chase 05

Chase 06

Chase 07

Colour Chase

Chase 08 Chase 09

Chase 10

Chase 11

Chase 12

Chase 13

Chase 14

Chase 15

Chase 16

All Chase

Chase Auto Speed (slow-fast)

Chase Sound Sensitivity (slow-fast)

Red 1 dimmer (0-100%)

Green 1 dimmer (0-100%)

Blue 1 dimmer (0-100%)

White 1 dimmer (0-100%)

Red 2 dimmer (0-100%)

www.prolight.co.uk

Value 000-255 000-007 008-255 000-007 008-022 023-037 038-052 053-067 068-082 083-097 098-112 113-127 128-142 143-157 158-172 173-187 188-202 203-217 218-232 233-247 248-255 000-127 128-255 000-255 000-255 000-255 000-255 000-255
Super Boogie User Manual 6

4-ch Mode 26-ch Mode 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Function Green 2 dimmer (0-100%) Blue 2 dimmer (0-100%) White 2 dimmer (0-100%) Red 3 dimmer (0-100%) Green 3 dimmer (0-100%) Blue 3 dimmer (0-100%) White 3 dimmer (0-100%) Red 4 dimmer (0-100%) Green 4 dimmer (0-100%) Blue 4 dimmer (0-100%) White 4 dimmer (0-100%) Red 5 dimmer (0-100%) Green 5 dimmer (0-100%) Blue 5 dimmer (0-100%) White 5 dimmer (0-100%) Red 6 dimmer (0-100%) Green 6 dimmer (0-100%) Blue 6 dimmer (0-100%) White 6 dimmer (0-100%)

Operating instructions
Value 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255

www.prolight.co.uk

Super Boogie User Manual 7

Operating instructions
Master/slave mode: To set the master unit, press the “MENU” button and use the “UP” and “DOWN” buttons on the rear of
the unit to show SLnd on the LED display. Press the “ENTER” button and use the “UP” and “DOWN” buttons on the rear of the unit to show NASt. Press the “ENTER” button to confirm the setting.
To set the other units in slave mode, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show SLnd on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose either SL1 or SL 2.
Press the “ENTER” button to confirm the setting. The unit/s will now run in sequence with the master unit. To exit out of any of the above options, press the “MENU” button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. Sound active: To access the sound active setting, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show SoUn on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between So 0 to So16. Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the sound sensitivity between Se O to Se99. Press the “ENTER”
button to confirm the setting. Value: 0 – 99 (0 = low, 99 = high) To exit out of any of the above options, press the “MENU” button. Auto Modes: To access the auto setting, press the “MENU” button and use the “UP” and “DOWN” buttons
on the rear of the unit to show Aut0 on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN”” buttons to choose between Au 0 to au16. Press the “ENTER” button and use the “UP” and “DOWN”” buttons to select the auto speed between SP 0 to SP 9.
Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Display blackout: To access the display blackout setting, press the “MENU” button and use the “UP” and “DOWN” buttons
on the rear of the unit to show LEd on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between on (display blacks out) or ofF(display always on).
Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button.

www.prolight.co.uk

Super Boogie User Manual 8

Operating instructions
Display invert setting: To access the display invert setting, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show dIsp on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between dIsp or ds1p. Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button. Software version: To access the fixtures software version, press the “MENU” button and use the “UP” and “DOWN” buttons
on the rear of the unit to show uer on the LED display. Now press the “ENTER” button. The unit will now display the fixtures software version e.g. u10.
To exit out of any of the above options, press the “MENU” button.

IR remote functions:
01
Button functions:

01 – Sets the unit into blackout on or off

ON/OFF

02 – Runs the Auto modes – Use the Auto +’ and-‘ buttons to change the desired program

AUTO

02

03 – Runs the Sound 1 mode

04 – Runs the Sound 2 mode 05 – Runs the Sound 3 mode 06 – Runs the Strobe mode

03

SOUND SOUND SOUND

05

04

1

2

3

07 – Sets the auto program – Use the +’ and-‘ buttons

to change the desired program

06

STROBE

08 – Sets the run speed/sensitivity – Use the +’ and-‘ buttons to change the desired speed (auto mode)/ sensitivity (sound mode)
07
09 – Sets the strobe mode run speed – Use the +’ and-‘ buttons to change the desired speed

­ AUTO

08

­ SPEED/ SENSITIVITY

+ + +

09

­ STROBE SPEED

www.prolight.co.uk

Super Boogie User Manual 9

DMX setup
Setting the DMX address: The DMX mode enables the use of a universal DMX controller. Each fixture requires a “start address” from 1- 512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in the chain starts at 107.
DMX 512: DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions form the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a data “out” terminal).
DMX linking: DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned to a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit requires either a standard 3-pin or 5-pin XLR connector for data input/output, see images below.

Further DMX cables can be purchased from all good sound and lighting suppliers or Prolight Concepts dealers. Please quote: 3-Pin: CABL10 ­ 2m CABL11 ­ 5m CABL12 ­ 10m
5-Pin: CABL185 ­ 2m CABL187 ­ 5m CABL188 ­ 10m
Also remember that DMX cable must be daisy chained and cannot be split.

www.prolight.co.uk

Super Boogie User Manual 10

DMX setup

Notice:
Be sure to follow the diagrams below when making your own cables. Do not connect the cables shield conductor to the ground lug or allow the shield conductor to come in contact with the XLRs outer casing. Grounding the shield could cause a short circuit and erratic behaviour.

Pin Configuration

3-Pin

5-Pin

Pin 1 – Ground

Pin 2 – Negative

Pin 3 – Positive

­

Pin 4 – N/C

­

Pin 5 – N/C

DMX 512 3-Pin XLR output
1 3
2

GROUND DMX + DMX ­

DMX 512 3-Pin XLR input
1 3
2

3-Pin XLR male

3-Pin XLR female

1 ground 3 hot

2 cold

2 cold

1 ground 3 hot

DMX 512 5-Pin XLR output

DMX 512 5-Pin XLR input

GROUND

12

DMX ­

21

3

DMX + 3

54

N/C

45

N/C

5-Pin XLR male

5-Pin XLR female

1 ground 2 cold

3 hot

5 N/C 4 N/C

5 N/C 4 N/C

3 hot

1 ground 2 cold

Line termination:
When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behaviour.
Using a cable terminator will decrease the possibilities of erratic behaviour. (3-pin – Order ref: CABL90, 5-pin – Order ref: CABL89)

3-Pin
12 3

Termination reduces signal transmission problems and
interference. It is always advisable to connect a DMX
terminal, (resistance 120 Ohm 1/4W) between pin 2 (DMX-) and pin 3 (DMX+) of
the last fixture.

5-Pin
15 24
3

5-pin XLR DMX connectors:
Some manufactures use 5-pin XLR connectors for data transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be used. The diagram below details the correct cable conversion.

5-pin XLR (female) Pin 1: GND (screen) Pin 2: Signal (-) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C

3-pin XLR (male) Pin 1: GND (screen) Pin 2: Signal (-) Pin 3: Signal (+)

3-pin XLR (female) Pin 1: GND (screen) Pin 2: Signal (-) Pin 3: Signal (+)

5-pin XLR (male) Pin 1: GND (screen) Pin 2: Signal (-) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C

www.prolight.co.uk

Super Boogie User Manual 11

Multiple fixture power linking / WEEE notice
Power linking: This fixture provides power linking via the power output on the rear allowing multiple units to be connected together. The maximum number of fixtures that can be connected is 20 fixtures @ 240V or 10 fixtures @ 120V (including the first fixture). After the maximum number of fixtures are connected a new power run will need to be started. Please note: Caution should be used when power linking other fixtures to the Super Boogie as the power consumption of other fixtures will vary. Fixtures fitted with lamps often require 2/3 times more current on startup, these may require their own power source..

POWER INPUT: 100-240V~50/60Hz
FUSE: F3A 250V POWER CONSUMPTION: 72W

www.prolight.co.uk
SAFETY ETE

DMX INPUT

POWER OUTPUT: 100-240V~50/60Hz

MIC MENU UP DOWN ENTER

DMX OUTPUT

POWER INPUT: 100-240V~50/60Hz
FUSE: F3A 250V POWER CONSUMPTION: 72W

www.prolight.co.uk
SAFETY ETE

DMX INPUT

POWER OUTPUT: 100-240V~50/60Hz

MIC MENU UP DOWN ENTER

DMX OUTPUT

Correct Disposal of this Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

www.prolight.co.uk

Super Boogie User Manual 12

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals