EQUINOX EB100 Bookshelf Speaker User Manual

AZATOM ®
EQUINOX EB 100
BOOKSHELF EB100

EQUINOX EB BOOKSHELF SPEAKER

Imprtant Safty Instructions

1. Read these Instructions.
2.  Keep these Instructions.
3. Heed all Wamings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenient receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid Injury from tip-over .
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been maged In any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Special note : When placing your unit on a lacquered or natural finish, protect your furniture with a cloth or other protective materia.

FCC Warnings
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection ainst harmful interference in a residential installlation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the eauipment off and on. the user ts encouraged to try to correct the interference by one or more of the folg measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connedi the equipment into an outlet on a circuit different from the to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings
he apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. Battery shall not be exposed to excessive heat such as sunshine, fire or the light. Caution marking is located at the rear or bottom of the apparatus. he marking information is located at the rear or bottom of apparatus,

This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts.

In The Box

 Box Contents

Speaker Controls

1. Infrared receiver

2. USB input port

3. LED indicator
   Light Blue: Line in 1
   Orange: Line in 2
   Blue: Bluetooth
   White: Optical
   Purple: USB

4. Master volume control / input selection
   Press in to navigate between audio sources:
   Line in 1 -> Line in 2 -> Optical -> Bluetooth -> USB

5. Treble dial

6. Bass dial

7. Line in 1 input port

8. Line in 2 input port

9. Optical input port

10.  Speaker output

11. Power switch

12. Power cord

Remote Control

1. Power ON/OFF
2. Mute/Unmute
3. Volume increase
4. Pause and play
5. Previous track
6.  Next track
7. Volume decrease
8. Optical mode
9. Line in 1 mode
10. Bluetooth input (Press and hold to disconnect Bluetooth devices)
11. USB mode
12. Line in 2 mode
13.  Recommended audio mode-MOVIE
14. Recommended audio mode-DIALOG
15. Recommended audio mode-MUSIC

Note:

1. Previous Track & Next Track only works under Bluetooth or USB mode.
2. Insert 2 x AAA batteries before usina.

Connections

1. Connect the speakers with the included speaker connecting cable.
2. Connect to power source, power on the speaker, then the indicator is lit.

Line In Input

1. Press the master volume control on the active speaker or press the “LINE 1/LINE2” button onthe remote control to select LINE IN input. The indicator turns to Light Blue(Line in 1) or Orange (Line in 2).
2. Using audio cable to connect audio source to the speaker.
3. Play from your device and adjust the volume accordingly.

Optical Input

1. Press the master volume control on the active speaker or press the “OPT” buttonon the remote control to select the optical input. The indicator turns to White(Optical).
2. Sing optical cable (optical cable included) to connect audio sources to your speaker.
3. Play from your devices and adjust the volume accordingly.

Bluetooth Input

Pairing:

1. Turn on speaker and switch to Bluetooth mode by pressing the Bluetooth button on the remote control or press the master volume control on back panel of the active speaker, The indicator turns to blue.
2. Go to setup section on your source devices (mobile phones, tablets, etc )and search for nearby Bluetooth devices, you will find “Azatom Equinox” in the ist.
3. Pair your device with “Azatom Equinox”
4. Play audio tracks on your device and adjust the volume to a desired level.
5. To disconeect Bluetooth, press and hold the master volume control for about 2 seconds.

Note:

1. Bluetooth connectivity and compatibility may be different among different source devices, depending on the software versions of source devices.
2. To enjoy the full Bluetooth functions of this product, please ensure your mobile device supports ADP and AVRCP profile.
3. PIN code for connection is “0000” if needed.

Specifications

500±50mFFS Bluetooth: R/L: 700±50mFFS
Frequency response:| 40HZ-20KHZ
Bass unit:| 4 inch (116mm)
Tweeter unit:| 13mm silk dome tweeter

Troubleshooting

• Try to turn up the volume using either the master volume control or remote control.
• Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
• Check if there is signal output from the audio source.
Cannot connect via Bluetooth| • Make sure the speaker is switched to Bluetooth input, in other audio input mode Bluetooth can not be paired or connected. Disconnect from any Bluetooth device by press and hold the volume dial in Bluetooth mode, then try again.
• Effective Bluetooth transmission range is 10 meters, please make sure operation is within the range.
• Try another Bluetooth device for connection.
The Equinox does not turn on| • Check if mains power is connected. or if the wall outlet is switched on.

REGISTER YOUR PRODUCT ONLINE. TO LEARN MORE & REGISTER FOR OUR AZATOM WARRANTY PLEASE VISIT: WWW.AZATOM.COM/WARRANTY
AZATOM© 2021 ALL RIGHTS RESERVED. AZATOM® IS PART OF AZATOM GROUP LIMITED.
SEE SITE FOR SAFETY INFORMATION. AZATOM© RESERVE THE RIGHT TO WITHDRAW ANY AND ALL PROMOTIONS WITHOUT NOTICE. FOR FULL WARRANTY,
EXTENDED WARRANTY AND PROMOTIONAL OFFER TERMS & CONDITIONS PLEASE VISIT WWW.AZATOM.COM/TERMS-CONDITIONS REGISTRATION REQUIRED

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>