Electro Industries B10U Optical Probe USB Drivers Installation Guide
- June 6, 2024
- Electro Industries
Table of Contents
Installation Guide for Electro Industries/GaugeTech’s B10U Optical Probe USB
Drivers
You need to install a driver to use the B10U in your computer for the first
time. Follow these instructions.
-
From the Optical Probe USB Drivers folder, open the folder for your operating system. In this example, we open Win7 & Win8 & Windows.
-
The folder contains CDMN files with configuration details – you can ignore these. Open the USB Driver Setup application.
-
You will see the screen shown below.
-
Click Extract to extract the installation files to your computer. You will see the screen shown below.
-
Click Next. You will see the screen below.
-
This screen shows the License Agreement for the driver. To continue installing the driver, click the button next to “I accept this agreement” and then click Next.
-
A window will briefly appear while the driver files are being installed and then you will see the screen shown below
-
Click Finish.
-
Connect the probe onto your meter’s optical port and to your PC’s USB port.
-
Open the PC’s Device Manager – either click Start>Settings>Control
Panel>System>Hardware>Device Manager (older operating systems) or enter Device
Manager in the Search bar next to your Start menu and then click on the Device
Manager icon. -
The USB Serial Port shows the COM port that the B10U Optical probe is connected to.
-
Use that port to connect to the meter via the B10U, using CommunicatorPQA® software.
See the example connection screen below.
NOTE: You can also click the Available ports button in the Connect screen to locate the COM port the B10U is using.
Doc # E128774 V.1.01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>