PHILIPS DN140B Coreline Downlight Gen4 LED20S 840 PSU C PI6 User Guide
- June 6, 2024
- Philips
Table of Contents
Coreline
Downlight
DN140B
| System
lumen
(lm)| CCT (K)| Driver| Phnom (W)| Dimensions 0A|
---|---|---|---|---|---|---
DN140B| LED1OS| 1100| | | 10.| 150 – 155| 162| 98| 0.42
LED2OS| 2200| | PSU| 19.0| 200 – 205| 216| 106| 0.66
LED1OS| 1100| 3000/| PSD-E| 12.| 150 – 155| 162| 98| 0.60
LED2OS| 2200| 4000| | 21.| 200 – 205| 216| 106| 0.84
141| 22.0
WIA-E| 21.
THE LUMINAIRE SHALL BE INSTALLED BY A QUALIFIED ELECTRICIAN AND WIRED IN
ACCORDANCE WITH THE LATEST IEE ELECTRICAL REGULATIONS OR THE NATIONAL
REQUIREMENTS.
CAUTION: RISK OF ELECTRIC SHOCK. THE LIGHT SOURCE CONTAINED IN THIS LUMINAIRE
IS NON-USER-REPLACEABLE, IT SHALL ONLY BE REPLACED BY THE MANUFACTURER OR HIS
SERVICE AGENT, OR A SIMILAR QUALIFIED PERSON.
THE DRIVER SHALL BE ONLY REPLACED BY THE MANUFACTURER OR HIS SERVICE AGENT OR
A SIMILAR QUALIFIED PERSON.
CLEAN WITH DRY CLOTHES
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC
SENSITIVE DEVICES
Inrush current
| PSU
11001m| PSU
22001m| PSD-E
11001m| 4 PSD-E 22001m| IA1
22001m| , WIA-E
1100/22001m
---|---|---|---|---|---|---
Electrical characteristics
!nom (A)| 0.05| 0.09| 0.11| 0.2| 0.11| 11
!max (A)| 2.20| 2.20| 7.| 9| 12.00| 5.
Tref (Ns)| 45| 45| 27| 22| 250| 56
MCB| No. of driver max.
B-10 A| 30| 30| 25| 25| 15| 31
B-13 A| 39| 39| 32| 32| 19| 40
B-16 A| 48| 48| 40| 40| 24| 50
C-10 A| 50| 50| 41| 41| 25| 52
C-13 A| 65| 65| 54| 54| 32| 67
C-16 A| 80| 80| 68| 68| 40| 85
2021-03-03
4441 000 07723
© 2021 Signify Holding. All rights reserved
Data subject to change without notice
Keep for future reference:
www.lighting.philips.com
Blue wire (Neutral)
Purple wire (Functional earth)
Yellow-Green wire (Protective earth)
Brown wire (Line)
http://www.lighting.philips.com/main/systems/themes/service-tag.html
To get an overview of all spare parts for a luminaire, please refer to detailed instructions in the service manual available via the Signify Service tag apps (Android and iOS).
https://play.google.com/store/apps/details?id=com.philips.servicetag
© 2021 Signify Holding.
All rights reserved. This document contains information relating to the
product portfolio of Signify which information may be subject to change. No
representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed. The information presented in this document is
not intended as any commercial ofer and does not form part of any quotation or
contract. Philips and the Philips Shield Emblem have registered trademarks of
Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding or
their respective owners.
Signify Holding.
The Netherlands
Storage, installation, use, operation, and maintenance of the products needs to be performed exactly according to the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with an indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over a lifetime.
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control
conductors
The light source contained in this luminaire and the external flexible cable
shall only be replaced by the manufacturer or his service agent or a similarly
qualified person
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>