Domo-elektro DO263A Mobile Air Conditioning Instruction Manual

DO263A

Instruction booklet

WARRANTY

Dear client,
All of our products are always submitted to strict quality control before they are sold to you. Should you nevertheless experience problems with your device, we sincerely regret this. In that case, we kindly request you to contact our customer service. Our staff will gladly assist you.

+32 14 21 71 91
[email protected]
Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00
Friday: 8.30 – 12.00 and 13.00 – 16.30

This appliance has a two-year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these
failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions, or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty.
If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it.

The guarantee on accessories and components that are liable to wear and tear is only 6 months. The guarantee and responsibility of the supplier and manufacturer lapse automatically in the following cases:

• If the instructions in this manual have not been followed.
• In case of incorrect connection, e.g., the electrical voltage that is too high.
• In case of incorrect, rough, or abnormal use.
• In case of insufficient or incorrect maintenance.
• In case of repairs or alterations to the device by the consumer or non-authorized third parties.
• If the customer used parts or accessories that are not recommended or provided by the supplier/manufacturer.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken, including the following:

• Read all instructions carefully. Keep this manual for future reference.

• Make sure all packaging materials and promotional stickers have been removed before using the appliance for the first time. Make sure children cannot play with the packaging materials.

• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices, and other working environments;
  • farmhouses;
  • by clients in hotels, motels, and other residential type environments;
  • bed and breakfast type environments.

• Children should be supervised to ensure that they do not play with the appliance.

• This appliance can be used by children aged 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 16 and supervised.

• Keep the appliance and its cord out of reach of children younger than 16 years.

• Attention: This appliance cannot be used with an external timer.

• Before use, check if the voltage stated on the appliance corresponds with the voltage of the power net at your home.

• The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local standards and requirements.

• Do not let the cord hang on a hot surface or on the edge of a table or countertop.

• Never use the appliance when the cord or plug is damaged, after a malfunction, or when the appliance itself is damaged. In that case, take the appliance to the nearest qualified service center for check-up and repair.

• Close supervision is necessary when the appliance is used near or by children.

• The use of accessories that are not recommended or sold by the manufacturer can cause fire, electrical shock, or injuries.

• Unplug the appliance when it is not in use, before assembling or disassembling any parts, and before cleaning the appliance. Put all buttons and knobs into the ‘off’ position and unplug the appliance by grasping the plug. Never unplug by pulling the cord.

• Do not leave a working appliance unattended.

• Never place this appliance near a gas stove or electric stove or in a place where it may come into contact with a warm appliance.

• Do not use the appliance outdoors.

• Only use the appliance for its intended use.

• Always use the appliance on a steady, dry, and level surface.

• Only use the appliance for domestic use. The manufacturer cannot be held responsible for accidents that result from improper use of the appliance or not following the instructions described in this manual.

• All repairs should be carried out by the manufacturer or its aftersales service.

• Never immerse the appliance, the cord, or the plug in water or any other liquid.

• Make sure that children do not touch the cord or appliance.

• Keep the cord away from sharp edges and hot parts or other heat sources.

• Before use, remove all packaging materials and any promotional stickers.

• Never place the unit near a stove, fire, or highly inflammable liquids.

• Never hit or shake the unit, to prevent damage.

• Never cover the air inlet or air outlet, to prevent overheating the unit.

• Never splash water on the unit, or place the unit near water, to prevent electrocution.

• Never place another appliance on the same electrical circuit as the air conditioning.

• Never handle the plug with wet hands.

• Never put any foreign objects in the openings of the air conditioning.

• Never use an extension cord.

• Never let children play near the unit.

• When you turn off the unit and want to turn it on immediately afterward, the compressor will need 3 min. to start up again.

• Always place the unit at least 1m away from TV or radio, to prevent disturbance.

• Never place the unit in direct sunlight, to prevent discoloration of the air conditioning.

• Make sure the angle of the unit is never more than 35° when you move the air conditioning. Never place the unit upside down.

• Always remove the water from the water tank, when storing the air conditioning. This will keep your air conditioning in optimal condition for a long time.

• Never use any chemicals to clean the unit, this will cause damage.

• Always make sure to disconnect the unit from the electrical supply before attaching or removing the air inlet grill.

• Make sure the air conditioning is always protected against condensation, splashing water, etc. Make sure the air conditioning can’t come in contact with or be pulled into water or any other liquid. If for some reason the air conditioning will fall into the water or any other liquid, immediately remove the plug from the socket.

• Never use the air conditioning in a damp room such as a bathroom or a laundry room.

• Always contact a qualified person for repairing the unit.

• Make sure that the free space around the unit is at least 30 cm.

• Never touch the unit with wet hands or bare feed.

• Do not press the buttons on the control panel with anything other than your fingers.

• Never remove fixed parts from the air conditioning. Never use the unit when it is not working properly, or when the unit has fallen or has been damaged.

• Never use the plug to turn the unit on or off. Always use the buttons on the control panel.

• Reparations, checking for leaks or other services need to happen by a qualified technician with the right certificates.

• Installation must be performed according to the installation instructions. Improper installation can cause water leakage, electrical shock, or fire.

• Do not touch the unit with wet or damp hands or when barefoot.

• If the air conditioner is knocked over during use, turn off the unit and unplug it from the main power supply immediately. Inspect the unit to ensure there is no damage. If
  you suspect the unit has been damaged, contact a technician or customer service for assistance.

• In a thunderstorm, the power must be cut off to avoid damage to the machine due to lightning.

• When the water drainage function is not in use, keep the upper and the lower drain plug firmly to the unit. When the drain plug is not in use, keep it carefully to prevent children from choking.

• Do not run cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

•  Disconnect the power if strange sounds, smell, or smoke comes from it.

• Do not press the buttons on the control panel with anything other than your fingers. Specific information regarding appliances with R290 refrigerant gas.

• Thoroughly read all of the warnings.

• When defrosting and cleaning the appliance, do not use any tools other than those recommended by the manufacturing company.

• The appliance must be placed in an area without any continuous sources of ignition (for example open flames, gas, or electrical appliances in operation).

• Do not puncture and do not burn.

• Refrigerant gases can be odorless.

• The appliance must be installed, used, and stored in an area that is greater than 8 m.

• This appliance contains a certain number of grams (see rating label back of unit) of R290 refrigerant gas.

• R290 is a refrigerant gas that complies with the European directives on the environment.
  Do not puncture any part of the refrigerant circuit.

• If the appliance is installed, operated, or stored in a nonventilated area, the room must be designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.

• The appliance must be stored in such a way as to prevent mechanical failure.

• Individuals who operate or work on the refrigerant circuit must have the appropriate certification issued by an accredited organization that ensures competence in handling
  refrigerants according to a specific evaluation recognized by associations in the industry.

• Repairs must be performed based on the recommendations from the manufacturing company. Maintenance and repairs that require the assistance of other qualified personnel must be performed under the supervision of an individual specified in the use of flammable refrigerants.

Caution: risk of fire/ flammable materials
This appliance uses a flammable refrigerant. If the refrigerant is leaked and exposed to an external ignition source, there is a risk of fire.

ENERGY TIPS

• Never use the unit in rooms that are bigger than the recommended room size.
• Make sure that the airflow of the unit is not blocked by furniture or other objects.
• Keep curtains closed during the warmest hours of the day.
• Make sure the filters of the air conditioning are always clean.
• Always keep doors and windows closed to keep the cool air inside and the warm air outside.
  SAVE THESE INSTRUCTIONS

PARTS

Front

1. Control panel

2. Air outlet
   Back

3.  Air filter

4. Air inlet

5. Air outlet

6. Drain
   Parts

7. Drain hose

8. Remote control

9. Remote control wall mount

10. Air outlet hose 10a. Air outlet hose connection

11. Wall installation kit
    11a. Wall adaptor
    11b. Wall installation kit connection

12. Window installation kit.
    12aWindow adaptor.
    12b Window installation kit connections.
    12c Window sealed.
    12d Adapter plug.
    12e-iron with screws

INSTALLATION

• Place the air conditioning on a solid and stable floor, this way you will prevent excessive noise and vibrations. Make sure that the floor is strong enough to support the weight of the appliance.

• The appliance has small wheels for easy moving. Make sure only to move the air conditioning over a flat and level surface. Be careful when moving the air conditioning over the carpet. Never roll the unit over an object. max 120 cm min 30 cm

• Place the unit near an earthed socket.

• Never place any object within 30 cm around the air conditioning.

• The air outlet hose must be used in the “cool” or “auto” mode.
  During the “fan” or “dry” mode, you don’t need to attach the air outlet hose .

• Make sure there is a free surrounding of at least 50 cm around the outlet.

• Make sure the air outlet hose isn’t bent during use.

INSTALLATION OF THE WINDOW KIT

• Place the coupling of the air outlet hose on the end of the hose.
• Place the air outlet hose on the air outlet at the back of the appliance.

• Place the coupling of the window attachment on the other end of the air outlet hose.
• Place the window adaptor in your window. This is possible for horizontal and vertical sliding windows. Block the window adapter at the desired length.
• Attach the hose with the coupling to the window adapter.
• Make use of the window seals to close off any possible openings in the window.
• Block the window adapter at the desired length using the supplied window adapter plug.
• If desired, you can fix the window with the L-iron and 2 screws.

INSTALLATION WALL KIT

• Place the coupling of the air outlet hose on the end of the hose.

• Place the air outlet hose on the air outlet at the back of the appliance.
  

• Make an opening in the wall the size of the wall adapter.

• Place the wall adapter in the opening. Attach the wall adapter using the screws supplied.

• Place the coupling of the wall attachment on the other end of the air outlet hose.

• Attach the hose with coupling to the wall adapter.

USE

The horizontal stripe on the front of the air conditioning can be opened and shut manually in order to aim the air outlet better.
CONTROL PANEL

1. ON/OFF touch
   To turn the unit off or on.

2. ”+” and “-” touch
   Use these touches to select the temperature. The temperature can be set between 17°C and 30°C. When pressing both buttons at the same time you can switch between “°C” or “°F”.signal to unit

3. MODE- touch
   With this touch, you can select the desired function. Every time when press this touch the function will change : COOL – DRY – FAN. The related indication light will turn on on the control panel. If you choose the FAN setting, the ventilation blows on the automatic position. You can only adapt the ventilation speed with the remote control. ON/OFF display Appears when the unit is turned and disappears when it is tur MODE display Displays the current model, including AUTO ON/OFF display Appears when the unit turns and disappears when it is tur  MODE display Displays the current  model, including AUTO COOL DRY HEAT FAN COOL DRY HEAT

4. LED display
   Will show het temperature selections. When the “dry or “fan” mode is selected, the display will show the room temperature.

REMOTE CONTROL
When using the remote control make sure that you always aim it towards the apparatus. If you don’t do this, you can briefly aim the remote control towards the apparatus and press the  ON-OFF button.
When the apparatus receives a signal from the remote control you hear a beep. The remote control must be used within an eight-meter radius around the apparatus.

1. ON/OFF touch
   To turn the unit off or on.

2. MODE- touch
   With this touch, you can select the desired function. Every time when press this touch the function will change: COOL – DRY – FAN. The related indication light will turn on on the control panel. FAN SPEED display Displays selected FAN SPEED: HIGH,

3. FAN touch
   With this touch, you can select the fan speed: Low   High

4. SLEEP touch
   You can use this touch for activating the “sleep” mode.
   When pressing the “sleep” touch, the selected temperature will be elevated by 1 °C after 30 min. After another 30 min, the temperature will increase by another 1°C. The air conditioning will maintain this temperature for 7 hours. After this time, the air conditioning will go back to the original set temperature and the “sleep” function will end.
   NOTE: this function cannot be selected with the “fan” or “dry” function.

5. TEMP touch
   Use these touches to select the temperature. The temperature can be set between 17°C and
   30°C. When pressing both buttons at the same time you can switch between “°C” or “°F”.

6. SHORT CUT touch
   With this button, you can fix and switch on a preferential setting.

7. TIMER ON touch
   With this function, you can select when the unit must turn on.
   Lights up when remote sends

8. TIMER OFF touch
   With this function, you can select when the unit must turn off.

9. LED touch
   This button turns off the control panel’s LED display. This can be used if the display gives too much light when you want to sleep. If you press the button a second time, the display will switch on again

SET FUNCTIONS

AUTO
In the AUTO function, the apparatus automatically chooses the right setting depending on the chosen temperature. This setting can also be chosen with the remote control.

1. Choose AUTO with the MODE button on the remote control.
2. Set the desired temperature with the TEMP button. The apparatus will determine the setting accordingly.
   You cannot adapt the speed of the ventilation (FAN) in the AUTO modus.

COOL

With the COOL function, you can cool the room up to a certain temperature.

1. Press the MODE button until the COOL indicator lamp is on.
2. Use the “+” and “-” buttons on the control panel or the TEMP button on the remote control to set the desired room temperature.
3. Use the FAN button on the remote control to set the desired ventilation speed. There are three settings: LOW , HIGH  BOD: Mand AUTO.

DRY
With this function, you can dehumidify the room. Keep windows and doors closed for this function.

1. Press the MODE button until the DRY indicator lamp is on.
2. Use the “+” and “-” buttons on the control panel or the TEMP button on the remote control to set the desired room temperature.
3. You cannot set the ventilation speed in this setting.

FAN

1. Press the MODE button until the FAN indicator lamp is on.
2. Press the FAN button of the remote control to set the ventilation speed. There are three settings: LOW M, HIGH MONMand AUTO.
3. The temperature cannot be adjusted.

Timer on
With this function, you can delay the start of the apparatus, up to a maximum of 24 hours.

1. Press the TIMER ON button on the remote control.
2. You can now read on the display of the remote control when the air conditioning will go on.
3. Press the TIMER ON button several times to increase the time. Or keep the button pressed.
4. Once the desired time is set, you will see “Timer on” on the display of the remote control. Two lights will light up on the control panel’s display.
5. If you want to switch off the timer, press the TIMER ON button several times until the counter goes to “o”. Or keep the button pressed.

Timer off
With this function, you can switch off the apparatus automatically after some time.

1. Press the TIMER OFF button on the remote control.
2. You can now read on the display of the remote control when the air conditioning will go off.
3. Press the TIMER OFF button several times to increase the time. Or keep the button pressed.
4. Once the desired time is set, you will see “Timer off” on the display of the remote control. Two lights will light up on the control panel’s display.
5. If you want to switch off the timer, press the TIMER OFF button several times until the counter goes to “0”.

Timer on + Timer off
You can also switch on both functions simultaneously. This determines when you switch on the apparatus, but also when the apparatus switches off.
Please note: this time is always from the hour when you program the setting. For example, it is now 1 pm. You want the apparatus to work from 4:30 to 6 pm. Set the TIMER ON on 3.5 h and TIMER OFF on 5.0 h.

Sleep
When pressing the “sleep” touch, the selected temperature will be elevated by 1 °C after 30 min. After another 30 min, the temperature will increase by another 1°C. The air conditioning will maintain this temperature for 7 hours. After this time, the air conditioning will go back to the original set temperature and the “sleep” function will end.
NOTE: this function cannot be selected with the “fan” or “dry” function.

Shortcut
With this button, you can set and switch on a preferential setting.
If you use a certain setting more often, you can set this by pressing the SHORTCUT button for three seconds. The apparatus then remembers the settings that are switched on at the moment of pressing. These settings can include: the user setting (MODE), set temperature, ventilation speed (FAN), and possibly also the SLEEP setting.
The moment you press the SHORTCUT button, the apparatus will work at the previously determined settings.

CLEANING AND MAINTENANCE

DRAINING
Permanent drain
During the “dry” mode you can use permanent drainage.

1. Remove the drain plug and the rubber top.
2. Attach the drain hose on the drain.
3. Make sure the water is drained in a safe and permanent way.

Drain code P1
When you don’t use the permanent drain, the nonrecycled condensation water, will be stored in the water tank.

• When the water tank is full a few beep signals will be heard and on the display the code
  P1 will appear. The “cool” or “dry” mode will end automatically. The fan will continue to operate, this is normal.

• Move the unit over to a place where you can easily drain the water.

• Remove the drain plug at the bottom of your unit (A) and drain the water.

• After fully draining the water tank, place the drain plug back on the drain opening.

• Restart the unit, make sure the error code P1 is no longer displayed. When the code doesn’t disappear, try turning it off and on the unit a few times. When the error code continues, please contact the after-sales service.

• NOTE: always make sure to install the drain plug, before turning the unit back on.

CLEANING

• Always remove the plug from the socket before cleaning the unit.
• Never use any chemical or abrasive products to clean the unit.
• Never clean the unit with water or any other liquid, this can cause electrocution.
• When the power cord is damaged it must be repaired or replaced by the after-sales surface of the manufacturer or by a qualified person.

Air filter

• Clean the air filter at least every 2 weeks. To make sure the air conditioning can operate in optimal conditions.
• Clean the air filter in lukewarm water with a bit of detergent. Rinse the filter thoroughly and let it dry.
• Make sure the filter is completely dry before placing it back into the air conditioning.

Air conditioning body

Use a damp, soft cloth and a bit of mild detergent, to clean the outside of the unit. Make sure the unit is thoroughly dried afterward.

Storing
Before storing the unit for a longer period of time, please follow the next steps :

• Drain all the water from the appliance.
• Afterward, turn on the unit in the “fan” mode for half a day. Make sure the unit is placed in a heated room. This will dry the unit completely and prevent the forming of mold.
• Turn off the unit, remove the plug from the socket and remove the batteries from the remote control.
• Clean the filters and place them back in the unit.
• Store the unit in a dry, dark place.

POSSIBLE PROBLEMS AND THEIR SOLUTIONS

The appliance isn’t working when pressing the on/off touch.

• The error code P1 is displayed, drain the water from the air conditioning.
• The room temperature is lower than the selected temperature. Adjust the selected temperature.

The room is not cool enough.

• The windows and doors aren’t closed. Make sure all windows and doors are closed.
• There are heat sources in the room. Remove all heat sources if possible.
• The air outlet hose is not connected or blocked. Attach the hose and check if there is no blockage.
• The selected temperature is too high. Adjust the selected temperature.
• The air filter is dirty. Clean the air filter.

The appliance is making too much noise or is causing vibrations.

• The floor is not level or flat. Place the appliance on the flat and level surface if possible.
• The air filter is dirty. Clean the air filter.

Your appliance makes a gurgling sound

• The sound is produced by the refrigerant in your appliance, this is normal.

ERROR CODES
Following error codes can be displayed on your air conditioning :
E1: the sensor for the room temperature is not working. Turn off the unit and remove the plug from the socket. Wait for 10 sec and plug the unit back in. Turn on the unit. When the error code repeats, you need to contact the after-sales service.
E2: The sensor of the dehumidifier doesn’t work. Turn off the unit and remove the plug from the socket. Wait for 10 sec and plug the unit back in. Turn on the unit. When the error code repeats, you need to contact the after- sales service.
E4: The display is not functioning properly. Remove the plug from the socket. Wait for 10 seconds. Plug the unit back in. When the error code repeats, you need to contact the after-sales service.
P1: The water tank is full. Connect the drain hose to the bottom drain and remove the water. When the error code repeats, you need to contact the after-sales service.

ENVIRONMENTAL GUIDELINES

This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it must be brought to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

The packaging is recyclable. Please treat the packaging ecologically.

Webshop
ORDER the original Domo accessories and parts online at:
webshop.domo-elektro.be

http://webshop.domo-elektro.be

LINEA 2000 BV – Dompel 9 – 2200 Herentals – Belgium –
Tel: +32 14 21 71 91 –
Fax: +32 14 21 54 63

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>