DOMETIC 9600023469 Roller Blind Chain Instruction Manual
- June 6, 2024
- Dometic
Table of Contents
WINDOWS, DOORS & LIGHTS
ROLLER COLLECTION
ROLLERBLIND CHAIN
© 2021 Dometic Group. The visual appearance of the contents of this manual is protected by copyright and design law. The underlying technical design and the products contained herein may be protected by design, patent or be patent pending. The trademarks mentioned in this manual belong to Dometic Sweden AB. All rights are reserved.
Please read these instructions carefully and follow all instructions,
guidelines, and warnings included in this product manual in order to ensure
that you install, use, and maintain the product properly at all times. These
instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions,
guidelines, and warnings carefully and that you understand and agree to abide
by the terms and conditions as set forth herein. You agree to use this product
only for the intended purpose and application and in accordance with the
instructions, guidelines, and warnings as set forth in this product manual as
well as in accordance with all applicable laws and regulations. A failure to
read and follow the instructions and warnings set forth herein may result in
an injury to yourself and others, damage to your product or damage to other
property in the vicinity. This product manual, including the instructions,
guidelines, and warnings, and related documentation, may be subject to changes
and updates. For up-to-date product information, please visit dometic.com.
Explanation of symbols
WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE
Supplementary information for operating the product.
Safety instructions
General safety
WARNING! Failure to obey these warnings could result in death or serious
injury.
Health hazard
- This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.
- Children shall not play with the device.
- Cleaning and user maintenance shall not be made by children without supervision.
- Blinds should be stowed before maneuvering to ensure no restriction of the driver vision.
Suffocation hazard
- This device contains small parts. Keep it away from children.
- The packaging includes plastic bags. Keep them away from children.
Strangulation hazard
- Children can strangle if safety devices are not installed and correctly adjusted to keep chains out of reach of children.These devices must be securely fixed at the maximum distance from the control such that the chain loop will not become slack. The chain tidy must be fixed at least 1.5 m from the floor.
CAUTION! Failure to obey these cautions could result in minor or moderate
injury.
Risk of injury
- The device must only be installed, removed or repaired by qualified or competent person using suitable fastening material.
- Take reasonable precaution when installing the blind and wear appropriate personal protective equipment.
- Only for boats and yachts: If the blind is in front of an open window, then the blind should be stowed when driving at more than 10 knots or in a sea state of more than moderate, as this can cause damage to the blind. Parts that come loose may injure persons in the vicinity.
NOTICE!
Damage hazard
- Blinds should be stowed completely when boat or vehicle is under way.
- Use screws and plugs suitable for the wall construction to fix the blind.
- Ensure that you do not drill through the wall.
- Ensure that your hands are clean or wear suitable gloves to avoid marking the fabric.
Scope of delivery
See B R, M P or CA leaflets respectively:
Item in fig.1 |
Quantity | Description |
---|---|---|
1 | 1 | Blind unit |
2 | 2 | Mounting brackets |
3 | 2 | Bracket caps |
4 | 2 | Chain tidy |
5 | 2 | Screw covers (BR only) |
6 | 2 | Guide wire kit (GW only) |
Intended use
The Rollerblind Chain is suitable for installation in yachts, boats, motor
homes, caravans or homes. The design and size of the blind are custom-made.
The fabric of the blinds is cut to the customer`s specifications.
The blinds are designed for interior use only and should not be installed in
bathrooms, wet rooms or other location with a high level of humidity.
This product is only suitable for the intended purpose and application in
accordance with these instructions.
This manual provides information that is necessary for proper installation
and/or operation of the product. Poor installation and/or improper operating
or maintenance will result in unsatisfactory performance and a possible
failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
- Incorrect assembly or connection, including excess voltage
- Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
- Alterations to the product without express permission from the manufacturer
- Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
Technical description
The blinds are available in three mounting types in different sizes:
- BR: Bracket mounted (available in sizes BR38 and BR46)
- MP: Mounting profile mounted (available in sizes MP38 and MP46)
- CA: Cassette mounted (available in sizes C1, C2 and C3)
There are different types of fabric restraints:
- FH: Free hanging
- GW: Guide wired (available as Dome ( A ), Flush Mount ( B ) and Extended ( C ), see GW versions in fig.
**1**
)
The number on the product label indicating the blind type is located:
- For BR versions on the tube under the fabric
- For MP versions on the back of the mounting profile
Installation
NOTICE! Risk of damage
Consider using two people to install the product if the blind is large or the
installation location is difficult to reach alone.
➤ Proceed as shown:
- BR leaflet: fig.
**2**
to fig.**5**
- MP leaflet: fig.
**2**
to fig.**4**
- CA leaflet: fig.
**2**
to fig.**4**
Fitting of the chain tidy
WARNING! Suffocation hazard
The chain must be fixed to the wall with the chain tidy in order to provide an
important safety devices to reduce the possibility of strangulation and
entanglement accidents.
➤ Proceed as shown: BR leaflet: fig. 6 MP leaflet: fig. 5 CA leaflet:
fig. 5
Removing the blinds
➤ Proceed as shown to remove the blinds:
- BR leaflet: fig.
**7**
- MP leaflet: fig.
**6**
- CA leaflet: fig.
**6**
Fitting the guide wire versions
➤ Proceed as shown:
- BR leaflet: fig.
**8**
to fig.**12**
- MP leaflet: fig.
**7**
to fig.**11**
- CA leaflet: fig.
**7**
to fig.**11**
Fix the hold down according the chosen option:
- Dome mounted hold down ( A) (BR leaflet: fig.
10
, MP leaflet: fig.9
, CA leaflet: fig.**9**
) - Flush mounted hold down (B) (BR leaflet: fig. a, MP leaflet: fig.
11
, CA leaflet: fig.10
) - Extended guide wire hold down (C) (BR leaflet: fig.
12
, MP leaflet: fig.**11**
, CA leaflet: fig.**11**
)
Operation
Deploying the blind
➤ Pull the chain to deploy the blind.
Stowing the blind
➤ Pull the chain to stow the blind.
Cleaning and maintenance
NOTICE! Risk of damage
- Do not grease, oil or lubricate the blind. Lubricants will damage the fabric.
- Be careful not to crease the fabric when using the brush attachment of a vacuum cleaner.
- Rubbing can damage the fabrics. · Spot-cleaning may result in cleaner areas than the surrounding.
- Do not soak the blinds.
- The manufacturer recommends testing any cleaning agents on a hidden area of the blind first.
NOTE Cleaning by professional cleaning personnel
The manufacturer cannot be held liable for improper cleaning methods or agents
used by professional cleaning personnel. In this case, the responsibility lies
with the cleaning company.
Removing dust
➤ Dust the blind regularly with a dust rag, dust glove or a vacuum cleaner
with a brush attachment. Blow excess dust off of your fabric using a can of
compressed air or a hair dryer on a cool setting.
➤ Fully deploy the blind to clean the fabric.
➤ Fully stow the blind to clean around side tracks or guide wires.
Spot cleaning
➤ Spot-clean with a soft white cloth, moistened with warm water. Add a mild
detergent if needed (non-abrasive and with no additives).
➤ Blot gently to avoid creasing or damaging the fabric. Always leave the blind
deployed to dry thoroughly.
Cleaning windows
➤ Always ensure the blinds are fully stowed before cleaning windows. This will
prevent spoiling the blind fabric by splatter or sprays of water or detergent.
Troubleshooting
Fault | Solution |
---|---|
Guide wire tension too low | See chapter “Fitting the guide wire versions” on |
page 7.
Guide wire too short| Order replacement guide wire, see spares leaflet at
dometic.com.
Guide wire broken| Order replacement guide wire, see spares leaflet at
dometic.com.
Guide wire blind not running smoothly| Check restraint position and recess
dimensions.
Fabric rolls off sides of ends of roller| Check if the guide wires are
perpendicular to the roller and that the roller is horizontal.
Warranty
The statutory warranty period applies. If the product is defective, please
contact the manufacturer’s branch in your country or your retailer. You can
find your authorised customer service centre at dometic.com.
For repair and warranty processing, please include the following information
when you send in the product:
- The number on the product label located for BR versions on the tube under the fabric, for MP versions on the back of the mounting profile and for CA versions on the back of the cassette.
- A reason for the claim or description of the fault.
If it is not possible to return the product, please provide photographs or video identifying the defect.
Disposal
➤ Place the packaging material in the appropriate recycling waste bins wherever possible.
If you wish to finally dispose of the product, ask your local recycling centre or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.
Technical data
| ROLLERBLIND CHAIN
---|---
Dimensions L x W x H:| see leaflet Diagrams
YOUR LOCAL
DEALER
dometic.com/dealer| YOUR LOCAL
SUPPORT
dometic.com/contact| YOUR LOCAL
SALES OFFICE
dometic.com/sales-offices
---|---|---
A complete list of Dometic companies, which comprise the Dometic Group, can be
found in the public filings of: DOMETIC GROUP AB Hemvarnsgatan 15 SE-17154
Solna Sweden
444510305809.02.2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>