KINGSONG KS-X1 MAX Motor Foldable Adult Electric Scooter Instruction Manual
- June 6, 2024
- KINGSONG
Table of Contents
KINGSONG KS-X1 MAX Motor Foldable Adult Electric Scooter Instruction Manual
Cautions
Electric scooter is a recreational personal transporter. Before mastering riding skills, you need to do practice. You will be responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this manual.
Please understand that you can reduce the risk by following all the instructions or warnings in this manual, but you cannot eliminate all the risks.
Please following the local traffic laws or restrictions when riding into public areas.
Please always wear a helmet properly when riding to protect your head, as well as other necessary protectors, such as elbow pads, kneecap.
Please slow down the riding speed when riding on crossing, going across the crowd, making a turn, climbing or downing a hill, passing a school and other place that high speed may bring damage to people.
Please do not allow kids of age below 12 to use the scooter on pubic area. Riders under the age of 18 years old should ride under adult supervision.
Please do not use the scooter in serious environments, to avoid scooter malfunction, which may cause damage to body or property, such as Rainy, Snowfield, Grassland, Miriness, Fog, Smoke and so on.
Please do not use the other chargers to charge E-scooter, Only use King Song supplied charger.
Please do not charge E-scooter, if the charger or power outlet is wet.
Please do not disassemble the scooter body or other modify without professional person from distributors.
Please do not allow others to ride your e-scooter unless he/her has carefully read and follow the instructions in this manual.
The Device & Accessories
1.1 Diagram: KS-X1 MAX
Accessories
1.2 Functions
1.3 Specifications
Features
- Superior Aviation Aluminum Alloy.
- Real-time Temperature Monitoring, Short Circuit /Low Voltage / Overcurrent / Overcharging Protection.
- Digital Speedometer Display, Easy to Read Speed.
- Real-time 5 Bars Battery Display.
- 1~3 Speed Gear, Press Button to Switch.
- Malfunction Display
Button Usage
-
Power ON/OFF: Long press the button for 3 seconds, all icons are lighting, showing speed & battery.
-
Headlight ON/OFF: Click the button (Headlight ON: )
-
Click the button for two times to change the speed gear from 1 to 3 levels, LED display ECO / D / S. Max speed is increasing when LED display from ECO to S.
Assembly and Set-up
-
Fasten the handlebar stem on the headset, and put the kickstand down
-
Attach the handlebar to the stem
-
Install six screws (two on each side) with the included hex wrench.
-
Verify that your Scooter can be powered on and off.
APP Usage
5.1 First Ride
Mobile device Requirement:
iOS 10.0 or above,
Bluetooth 4.0 or above.
Install the APP and register/login.
Android 4.3 or above,
Install the APP and register/login.
Android
Please give the corresponding permis sion to scooter APP, to ensure the APP can run normally in your mobile device.
Open Bluetooth/location (or GPS), Click ‘Search’ – -> Click the corresponding model KS-X1 MAX in device list to connect. The E-scooter will beep when APP is connected with E-scooter.
5.2 Learn to Ride
-
Step 1: Check E-scooter Status
Check the environment whether it’s safe to ride without hurting yourself or others.
Check the battery level and remain mileage in APP. -
Step 2: Wear protective equipment.
-
Step 3: Try to slide with one leg.
-
Step 4: Touch the throttle slightly and try to put two leg on the deck.
-
Step 5: During riding, try to release the throttle and pull the brake lever.
-
Step 6: Try to use the headlight.
5.3 Warnings
-
Wear protective equipment.
-
Do not ride in rainy or cross puddles.
-
Do not load over 125kg.
-
Ride slowly in special cases.
-
Do not place one foot on the deck or on the ground when riding.
-
Do not tread the back of the fender.
-
Do not leave your hands during riding.
-
Do not ride upstairs or downstairs, or over obstacles.
-
Do not hold a child during riding.
-
Do not ride on highway or motor vehicle road.
-
Do not ride with sharp turn.
5.4 Firmware Upgrade
Please enter APP and enter Mine Video Data Study, and find how to upgrade firmware via User APP.
5.5 Cruise Control
Open cruise-control in APP, while you keep the same speed, riding for 3~5 seconds, the E-scooter will be in cruise-control mode(running at constant speed on flat road) Please use cruise-control only on flat road, or you will fall down on other roads.
5.6 Error Description
Folding and Carrying
Make sure that the scooter’s turned off. To fold, unlock the folding mechanism, and bend the handlebar stem to hook the buckle on the rear mudguard. To open, press the bell trigger to remove from the buckle, erect the handlebar and lock the folding structure.
Hold the handlebar stem with either one hand or both hands to carry.
Adjust the handlebar
If the
handlebar and its stem sway during riding, use the hexagon wrench to tighten
the screws on the folding mechanism.
Battery
8.1 Temperature Effect on Battery
Battery power will vary with the temperature, mileage per charge will have slight difference under different temperature, and following table is just for your reference.
MPC: Mileage per fully charged.
8.2 Charging
The device has a built-in lithium battery, no extra battery installation is required, just charge the device when it indicateslow battery.
Plug in the power source after inserting the charger plug, this can prevent potential risk to ensure a safer charger.
It takes around 8hrs to get 100% charged, when the red lights turn into green, indicating the charging is completed. If not in urgent need, please wait until charging complete before unplugging, for after charging, the protection circuit will perform flow equilibrium.
Clean and Maintenance
9.1 Clean and Maintenance When charging
- Please place the E-scooter in cool and ventilate places to release heat.
- Please avoid high temperature or moist.
- Please avoid water into the E-scooter to prevent electric shock, especially water drops from the charger cable to the the charging port.
When cleaning
- Please make sure the E-scooter is off.
- Please use soft cloth to clean the E-scooter.
- Please don’t use water to wash the E-scooter or place E-scooter in water.
When storage
- Please place the E-scooter in cool and ventilate places (temperature -10~50℃, relative humidity 0~90%).
- Please don’t place subjects on the E-scooter or heavy subjects to squeeze the E-scooter.
9.2 Battery Pack Maintenance
When the E-scooter is fully charged, please check the voltage of the battery
in APP. Normal voltage is 40V~54.6V.
If the voltage is not in this range, please contact the distributor for
battery pack maintenance.
Please charge the E-scooter at least one time each month, to extend the
battery pack lift time.
Please do not disassemble, assemble or change the battery by yourself.
9.3 Regular Maintenance
Please do not disassemble or assemble the E-scooter without the guide or help
from professional maintenance from the seller or distributors.
Please make a video or photo to distributors when the E-scooter run
abnormally, as well as providing the serial number.
Warranty
10.1 Limited Warranty
Sellers warrant the EUC by following limits.
Motor, Controller board for 365 days from the item departure from factory.
Battery package for 183 days from the item departure from factory.
Warranty is valid only within a total mileage of 1000km.
10.2 Exclusion from Warranty
Above limited warranty DOES not include damage or lose not caused item’s defectives (i.e. warranty only covers manufacturer defectives, does not cover any damage, unauthorized modification, improper operation, disassembly etc.)
10.3 After Sale Service
Please contact the local sellers or distributors for after-sale service.
Kingsong Intell Co.,LTD
Address : BLDG 7, NO 71 XINGHU RD, 8TH INDUSTRY PARK,
HONGXING, YUTANG,GUANGMING,SHENZHEN
Tel : +86-755-23193477
Fax : +86-755-23193248
E-mail : [email protected]