TECH matte Elastic Skin applicator Installation Guide
- June 6, 2024
- TECH matte
Table of Contents
TECH matte Elastic Skin applicator Installation Guide
Scan Me
or visit
How to Use
-
Adhere the mounting pad to a sturdy surface, and place your phone on top of it. This will help keep the phone in place during installation.
-
Begin by cleaning the screen with the Wet/Dry Wipes and the Dust Removal Stickers. *Please watch the installation video carefully before installing the screen protector.
-
Fully insert the alignment tool into your phone’s USBC port, making sure it is flush against the bottom of your phone.
-
Remove the Tab 1 film carefully, and place the three hole punch part of the screen protector onto the alignment tool. Please make sure that the Tab 3 film, which has the text printed on it is face up, then affix the alignment tool cap to the bottom piece to keep the protector in place.
-
Carefully align the protector to your phone’s screen, and once in place, swipe on the middle adhesive strip.
-
Lift the loose end with tab 2, starting from the middle of the protector at the adhesive strip. Use the squeegee to push the tab 2 film out from underneath (effectively rolling and adhering the top half of the screen protector into place.)
-
Remove the cover of the alignment tool and then remove the bottom half of the tool from the phone’s USBC port.
-
Repeat Step 6 for the bottom half of the screen protector.
-
Push with thumbs along the protector to seal it in place and remove the top mask film.
Damaged or Arrived Broken?
Try our 1-Click Claim
Go to TecMatte.com/Warrantyclaim
Scan the QR code Below.
Want More Coverage?
Unlock our Lifteime Warranty
Go to Tecmatte.com/Register
Scan me or visit
Www.TecMatte.com/install/EL
Support
24/7 Customer Support
support@tecmatte.com
www.tecmatte.com
Stay Connected
@TecMatte
@Tecmatte
@TecMatte
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>