BRESSER Filament Instruction Manual

: June 6, 2024
: BRESSER

Table of Contents

General Safety Warnings
Support / Service

Filament
Art. No. 2080250

Anleitung / Manual

WARNING!

Do not remove the nozzle housing!
Hot surface! Do not touch the nozzle that is heating up during operation!
Risk of injury due to moving printer parts. Do not wear gloves or other things that can get tangled during operation!

General Safety Warnings

PLEASE READ AND STRICTLY FOLLOW ALL THE
SAFETY WARNINGS AND NOTICE BELOW.

Environment Requirements
• Temperature: RT 15-30°C; Moisture: 20%-70%

Filament Storage
• All polymers degrade with time. Do not unpack filament until necessary. The filament should be stored in clean and dry conditions.

Work Environment Safety

You must always keep your working space clean.
Don’t use the 3D Printer near inflammable liquids, gas, or dust.
Keep the 3D Printer out of reach of children and untrained persons.

Electrical Safety

Only connect the 3D Printer to a properly grounded power outlet.
Do not use the 3D Printer in damp or wet locations. Do not expose the 3D Printer to the burning sun.
Avoid using the device during an thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.

Personal Safety

Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after finishing printing.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
Do not operate the device while you are tired or under the influence of drugs, alcohol, or medication.

Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after finishing printing
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
Do not operate the device while you are tired or under the influence of drugs, alcohol, or medication.

Cautions

Do not leave the device unattended for long.
Do not make any modifications to the device.
To lower the build plate before loading/unloading filament. (The distance between the nozzle and build plate should be kept for at least 50mm)
Operate the device in a well-ventilated environment.
Never use the device for illegal activities.
Never use the device to make any food storage vessels.
Never use the device to make any electrical appliance.
Never put the model into your mouth.

Support / Service

We offer an individual service for this product beyond the purchase. If you have any problems with the product, our support team will be happy to assist you.
For a smooth process, please keep the following information handy for possible inquiries:
• Service/warranty card
• Article number and description
• Date of purchase and dealer
Contact details:
E-Mail: service.3d-printer@bresser.de
(preferred communication)
Internet: www.bresser.de/c/de/service
Telephone: 00 800 – 63 43 7000
Service times:
Monday – Friday (except for holidays) 9:00 – 16:30
free hotline throughout Germany