PHILIPS H7-LED LED Bulb Instruction Manual
- June 6, 2024
- Philips
Table of Contents
Ultinon Pro
H7-LED
Achtung!
Please check the car installation manual and follow the instructions for lamp replacement.
H7-LED
Option 1 (Feder)
http://www.philips.de/LED-Strassenzulassung
Option 2 (Feder-Klammer)
http://www.philips.de/LED-Strassenzulassung
Option 3 (Adapter Ring)
http://www.philips.de/LED-Strassenzulassung
Please check the allowed scope of application with the compatibility of your vehicle.
PKW Modell
Car model| Adapter Ring Typ
Adapter ring type
---|---
1| “abc”
2| …
Detailed Information in the specific installation instructions of the adapter
H7-LED CANbus
www.philips.de/LED-Strassenzulassung
Allgemeine Anleitung
How to get general type approval (ABG) for use in your vehicle on public roads:
-
Scan the QR code on the top of the packaging to authenticate the product and download the ABG certificate.
www.philips.de/LED-Strassenzulassung -
Print out the approval document (ABG).
-
Keep the approval certificate (ABG) at all times with you in the vehicle.
You are responsible to comply with all applicable legal requirements.
This LED replacement light source is only approved for right-hand traffic.
Before entering a country with left-hand traffic, the LED lamp must be
replaced by a halogen lamp.
Please check the car installation manual and follow the instructions for lamp
replacement.
Please change lamps in pairs.
The LED light source, cables, and components must be mounted in a way that the
headlamp won‘t be damaged and that its function is maintained. All parts must
be fixed safely.
Check correct position and safe fixation of LED lamp within the lamp holder.
The replacement of the lamp in the headlamp requires inspection and eventually
adjustment of headlamp setting by a qualified garage.
The replacement of the halogen lamp by an LED light source may affect the
deicing and defogging behavior of the headlamp.
The LED light intensity is very high while turned on. Do not look directly
into the beam to avoid damage to the eyes.
Please wear safety glasses while replacing halogen lamps
**** Lamps will heat up during operation. Do not touch. Please let it cool
down in order to avoid potential injury due to contact with a hot surface.
Please wear safety gloves to avoid injuries during mounting.
Keep out of reach of children.
http://www.philips.de/LED-Strassenzulassung
Lumileds is the warrantor of this product.
Philips and the Philips Shield Emblem have registered trademarks of
Koninklijke Philips N.V. and are used under license.
© 2021 Lumileds Holding B.V. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>