ICY BOX IB-DK2108M-C Laptop Docking Station User Manual

Manual IB-DK2108M-C
USB Type-C®
notebook DockingStation with integrated
M.2 NVMe slot
Handbuch IB-DK2108M-C
USB Type-C®
Notebook DockingStation mit integriertem
M.2 NVMe Einschub

Safety information IB-DK2108M-C Handbuch IB-DK2108M-C
Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity f the consequences if the measures to prevent hazards are not complied with.

DANGER Warns of a directly hazardous situation causing death or serious injury.
WARNING  Warns of a potentially hazardous situation that may cause death or serious injury.
CAUTION Warns of a potentially hazardous situation that may cause minor injury.
IMPORTANT Warns of a potential situation that may cause material or environmental damage and disrupt operative processes.

1. Risk of electrical shock
ARNING Contact with parts conducting electricity
Risk of death by electrical shock

• Read the operating instructions prior to use
• Make sure the device has been de-energized prior to working on it
• Do not remove contact protection panels
•  avoid contact with conducting parts
•  Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments only
•  Operate the device using a power unit that meets the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapor, and dust
• Do not modify the device
•  Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs

2. Hazards during assembly (if intended)
Sharp components
CAUTION Potential injuries to fingers or hands during assembly (if intended)

•  Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
•  Do not force components together
•  Use suitable tools
• Use potentially enclosed accessories and tools only

3. Hazards caused by a development of heat Insufficient device/power unit ventilation Overheating and failure of the device/power unit
IMPORTANT

•  Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
•  Avoid direct sunlight on the device/power unit
•  Guarantee sufficient ambient air for the device/power unit
•  Do not place objects on the device/power unit

4. Hazards caused by very small parts and packaging
WARNING Risk of suffocation
Risk of death by suffocation or swallowing

• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
•  Do not hand over small parts and packaging to children

5. Potential data loss
Data lost during commissioning Potentially irreversible data loss

• Always comply with the information in the operating instructions/quick installation guide
• Exclusively use the product once the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product

IMPORTANT

6. Cleaning the device
Harmful cleaning agents
Scratches, discoloration  damage caused by moisture or short circuit in the device
• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth
IMPORTANT
Disposing of the device
Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by
components, recycling circle interrupted
This icon on the product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the
Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waster recycling waste. If you would like to dispose of this product and potentially include batteries, please return it to the retailer or your local waste disposal and recycling
point.
IMPORTANT
The included batteries must be completely discharged before return. Take precaution to protect the batteries from short circuits (e.g. by insulating the contact poles with
adhesive tape) If you have any questions, please do not hesitate to contact our support at support@raidsonic.de or visit our website at www.icybox.de.

Package content
1x IB-DK2108M-C, 1x USB Type-C® to Type-C ® cable (E-mark), 1x M.2 silicone pad, 1x screw for M.2, 1x screwdriver, 1x rubber protection sleeve, 1x manual Product overview
1.  1x USB 2.0 Type-A data interface
2. USB Type-C interface to host computer
3. 2x USB 3.1 (Gen 2) Type-A data interface
4. SD 3.0 card reader with up to 100 MB/s
5. microSD 3.0 card reader with up to 100 MB/s

6. USB Type-C ® interface only for Power Delivery with up to 100 W (20 V/5 A), no data transfer
7. HDMI ® interface with up to 3840×2160@60 Hz8. M.2 NVMe SSD slot (cover removable for installation)

USB Type-C ® notebook DockingStation
The USB Type-C ® DockingStation from ICY BOX in elegant design and with Power Delivery technology has been developed for connection to a computer (e.g. laptop,   notebook, etc.) with Type-C ® interface and DisplayPort ™  Alt Mode support in order to be able to connect additional monitors, USB peripherals and memory cards. A
special feature is an additional slot for installing an M.2 NVMe SSD on the bottom of the docking station. The computer can also be supplied with power via a Power
Delivery Type-C ® interface.
Features

•  Premium aluminium enclosure in the size of a smartphone

• Data transfer, video, and Power Delivery via one Type-C ® cable

•  USB 3.1 (Gen 2) based technology for best performance up to 10 Gbit/s

•  Integrated M-Key slot for one 22x 30/42/60/80 mm NVMe SSD  (not included)

•  HDMI ® video interface supports resolutions of up to 3840×2160@60 Hz

•  Mirroring and extending of a notebook display

•  2x USB 3.1 (Gen 2) Type-A interfaces, data transfer rates of up to 10 Gbit/s. 1x USB 2.0 Type-A interface, data transfer rates of up to 480 Mbit/s

•  1x Type-C ® interface for Power Delivery with up to 100 Watt (no data transfer)

•  1x Multi-LUN card reader for SD 3.0 and microSD 3.0 cards with up to 100 MB/s

•  Bus-powered, no power supply necessary Requirements

•  Host computer with a free USB Type-C ® port (to ensure full dock functionality, the host USB Type-C
  ® port must support USB Power Delivery and DisplayPort ™ Alt Mode or Thunderbolt ™  3).

• Any of the following operating systems: Windows ®, macOS®
  Note: The DockingStation can still connect to a host computer with a USB Type-C ® port that does not support Power Delivery (but must still support DisplayPort
  ™ Alt  Mode). In this configuration, the docking station will not provide power to your host notebook. USB Type-C ®Not all USB Type-C ® ports support the full functionality of the USB Type-C ® standard. Some ports might only provide data transfer, and might not support video or
  Power Delivery over USB.

USB Type-C ™ ≠ USB Type-C ™
Important!
This ICY BOX product requires the usage of DisplayPort™ Alt Mode technology over the USB Type-C™ connector. Not all computers, notebooks or tablets with a USB Type-C™ interface support the   DisplayPort™ Alt Mode. Please check the specifications of your computer system as well as its USB Type-C™ interface or use the ICY  OX product with a
Thunderbolt™ 3 connector. To use this dock to its full potential, ensure that the host USB Type-C  ® port from your computer supports DisplayPort ™ Alt Mode, as well as Power Delivery orThunderbolt ™ 3. Note! The additional USB Type-C ® port on the docking station supports only Power   Delivery (no data transfer).
Installation and use of the DockingStation
1. Connect the USB Type-C ® to Type-C ® cable between the supported host computer and Type-C ® host interface (2) of the DockingStation
2. Connect your devices to the appropriate interfaces on the dock Maybe the dock will automatically install some of the required drivers once it is connected to your notebook’s  SB Type-C ort.
If you receive any prompt, follow the on-screen instructions to complete the installation.

3. Connect your external monitor to the docking station’s video port.
Note: Video output capabilities are dependent on the video card and hardware specifications of your connected host notebook. Certain graphics cards have limited
support, while some monitors will also limit the output resolution.
Configure a display device
Please set your display settings according to your operating system and requirements.
For detailed information, consult the corresponding operation manual and description- on of your operating system.

Supported video resolutions
The DockingStation supports: – Ultra HD resolution via HDMI ® if the connected HDMI ® monitor and the graphics card support it via DP Alt Mode function.
Displays Video output configuration Maximum resolution/monitor 1 HDMI Supported video resolutions
The DockingStation supports: – Ultra HD resolution via HDMI ® if the connected HDMI ®  onitor and the graphics card support it via DP Alt Mode function.

Displays
Video output configuration Maximum resolution/monitor   HDMI    3820×2160@60 Hz Use of memory card slots SD card
Insert the SD card into the SD card slot with the beveled corner first. The golden pins of the card must point downwards (blue LED at the top). microSD card
Insert the microSD card into the microSD card slot with the beveled corner first. The golden pins of the card must point upwards (blue LED at the top).
– Multi-LUN card readers – allow the use of two cards simultaneously  Note: In order to power and charge your connected notebook, its USB Type-C  ® port must support  SB  ower Delivery or Thunderbolt ™ 3.
Important:
1. When the IB-DK2108M-C is connected via the USB Type-C ® interface of a Chromebook ™
, a mouse connected via USB Type-A is not recognized immediately, but the connection is established with a delay of a few seconds. This also happens with other Type-C   adapters (including Apple original 3-in-1 adapter) when they are connected to a Chromebook ™
2. Attention! When connecting or disconnecting a Power Delivery adapter via the Type-C ® interface of the IB-DK2108M-C, the other interfaces used may be disconnected briefly and then immediately reconnected. To avoid data loss during            a data transfer, stream interruptions or the like, DO NOT connect or disconnect the
Power Delivery power supply while data transfers are in progress.® 3820×2160@60 Hz
Use of memory card slots
SD card
Insert the SD card into the SD card slot with the beveled corner first. The golden pins of the card must point downwards (blue LED at the top). microSD card
Insert the microSD card into the microSD card slot with the beveled corner first. The golden pins of the card must point upwards (blue LED at the top).
– Multi-LUN card readers – allow the use of two cards simultaneously Note: In order to power and charge your connected notebook, its USB Type-C ®  port must support USB Power Delivery or Thunderbolt ™ 3. Important:
1. When the IB-DK2108M-C is connected via the USB Type-C ® interface of a Chromebook ™, a mouse connected via USB Type-A is not recognized immediately, but the connection is established with a delay of a few seconds. This also happens  with other Type-C ® adapters (including Apple original 3-in-1 adapter) when they are connected to a Chromebook ™
.2. Attention! When connecting or disconnecting a Power Delivery adapter via the Type-C ® interface of the IB-DK2108M-C, the other interfaces used may be disconnected briefly and then immediately reconnected. To avoid data loss during a data transfer, stream interruptions or the like, DO NOT connect or disconnect the Power Delivery power supply while data transfers are in progress.

2. Insert the M.2 NVMe SSD carefully with the connection side first into the M.2 socket at an angle of about 30° so it fits in smoothly.

3. Push the SSD down and fix the M.2 NVMe SSD with the delivered M.2 spacer and screw as displayed.

4. Prepare the delivered thermal pad and remove the transparent protection foil at one side.

5. Place the thermal pad (side without foil downwards) directly onto the M.2 NVMe SSD and remove the second transparent protection foil now.

6. Reattach the cover and the two screws previously removed.

7. Ready to use!
8. Optionally, you can use the supplied protective rubber sleeve to protect the unit.
To do this, place the device in the sleeve according to the cut-outs for the connections. Advice for an installed M.2 NVMe drive (optional) M.2 NVMe SSD not inluded
The IB-DK2108M-C with installed M.2 NVMe drive inside can be connected to or disconnected from the computer via USB cable without shutting down the computer.
A new drive must first be initialized, partitioned and formatted by the operating system in order to be displayed by the system.
If the drive is not recognized instantly by the operating, system please check:
– if the driver software is installed (USB)
– if the SSD is initialized, partitioned, and formatted
Please await the end of reading/writing operations before disconnecting the drive-in in order to avoid data loss.
The full USB 3.1 (Gen 2) transfer rate can only be achieved with a USB 3.1 (Gen 2) host computer. Furthermore, the USB 3.1 (Gen 2) drivers must be installed
by the operating system. If this is not the case, install the appropriate drivers for your operating system (Windows ®, macOS ® ).

© Copyright 2021 by RaidSonic Technology GmbH. All Rights Reserved.
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the specifications and/ or design of the above-mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic  Technology GmbH assumes no responsibility for any dif erences between the product mentioned in this manual and the product you may have. DisplayPort ™ and the DisplayPort ™ logo are trademarks owned by the Video Electronics standards Association (VESA ® ) in the United States and other countries. The terms HDMI ® and HDMI® High-Definition Multimedia Interface, and the HDMI ® logo are trademarks or registered trademarks of HDMI ® LA, Inc. in the United States and other countries. Apple and macOS are registered trademarks of Apple Computer Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>