ICY BOX IB-2280SSK 8bay 2.5 Inch SATA-SAS HDD Backplane Installation Guide

ICY BOX IB-2280SSK 8bay 2.5 Inch SATA-SAS HDD Backplane

Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:

Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.

DANGER: Warns of a directly hazardous situation causing death or serious injury.
WARNING: Warns of a potentially hazardous situation that may cause death or serious injury.
CAUTION: Warns of a potentially hazardous situation that may cause minor injury.
IMPORTANT: Warns of a potential situation that may cause material or environmental damage and disrupt operative processes.

1. Risk of electrical shock
   WARNING: Contact with parts conducting electricity

   • Risk of death by electrical shock
   • Read the operating instructions prior to use
   • Make sure the device has been de-energised prior to working on it
   • Do not remove contact protection panels
   • Avoid contact with conducting parts
   • Do not bring plug contacts in contact with pointed and metal objects
   • Use in intended environments only
   • Operate the device using a power unit meeting the specifications of the type plate only!
   • Keep the device/power unit away from humidity, liquid, vapor, and dust
   • Do not modify the device
   • Do not connect the device during thunderstorms Approach specialist retailers if you require repairs

2. Hazards during assembly (if intended)
   CAUTION Sharp components

   • Potential injuries to fingers or hands during assembly (if intended) Read the operating instructions prior to assembly
   • Avoid coming into contact with sharp edges or pointed components
   • Do not force components together
   • Use suitable tools
   • Use potentially enclosed accessories and tools only

3. Hazards caused by the development of heat
   IMPORTANT Insufficient device/power unit ventilation

   • Overheating and failure of the device/power unit Prevent externally heating up components and ensure an exchange of air
   • Do not cover the fan outlet and passive cooling elements
   • Avoid direct sunlight on the device/power unit
   • Guarantee sufficient ambient air for the device/power unit
   • Do not place objects on the device/power unit

4. Hazards caused by very small parts and packaging
   WARNING Risk of suffocation

   • Risk of death by suffocation or swallowing
   • Keep small parts and accessories away from children Store/dispose of plastic bags and packaging in an area that is inaccessible to children
   • Do not hand over small parts and packaging to children

5. Potential data loss
   IMPORTANT Data lost during commissioning

   • Potentially irreversible data loss
   • Always comply with the information in the operating instruc tions/quick installation guide
   • Exclusively use the product once the specifications have been met
   • Back up data prior to commissioning
   • Back up data prior to connecting new hardware
   • Use accessories enclosed with the product

6. Cleaning the device
   IMPORTANT Harmful cleaning agents

   • Scratches, discolouration, damage caused by moisture or short circuit in the device
   • Disconnect the device prior to cleaning
   • Aggressive or intense cleaning agents and solvents are unsuitable
   • Make sure there is no residual moisture after cleaning We recommend cleaning devices using a dry, anti-static cloth

7. Disposing of the device
   IMPORTANT Environmental pollution, unsuitable for recycling
   Potential environmental pollution caused by components, recycling circle interrupted
   This icon on the product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE), this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste, or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.

If you have any questions, please do not hesitate to contact our support at support@raidsonic.de or visit our website at www.icybox.de.

Features

• 8x 2.5″ SATA or SAS HDD/SSD in only 2x 5.25″ bay
• Anti-Vibration Technology
• HDD´s up to 15mm heights
• Aluminum and Stainless Steel
• Alarm for overheating and fan failure
• SATA I/II/III host interface 6.0 Gbit/s
• With key lock to secure the HDDs
• LED for power, HDD access, Fan Alarm
• Ø 7 cm fan (2400 / 3000 rpm)
• Hot Swap
• 2x SATA Power Connector 15pin
• 8x Data Signal Connector 7pin

Packing Content

• 1x IB-2280SSK,
• 2x keys,
• 24x screws,
• 1x Manual (SATA cables not included)

Product view

Front view

1. HDD power LED (blue) & HDD access LED (Purple blinking)
2. Triangle Safety lock
3. Fan Status LED (red for failure)
4. Temperature Status LED (red for failure)

Rearview

1. 8x 7 Pin SATA data signal connector
2. 2x 15pin power connector
3. FAN speed switch high (3000 rpm) / low (2400 rpm)
4. HDD LED switch (on/off)
5. External HDD access signal connector
6. External temperature & FAN failure signal connector

LED Function

• HDD connected:
  • LED 1. = blue
• HDD access:
  • LED 1. = pruple blinking
• Fan failure
  • LED 3. = red
• Temperature failure:
  • LED 4. = red

Technical Data

• HDD/SSD: 8x 2.5″ SATA/SAS HDD/SSD

• HDD height: 6 ~ 15 mm

• Form factor: 2x 5.25″ bay

• Dimension: (WxHxD) 159x146x85 mm

• Material: Aluminum with anti-rust coating

• HDD Interface support: SATA I/II/III (6 Gbit/s)
  SAS I/II (6 Gbit/s)

• Weight: 1.3 kg

• Overheating temp: 60°C

• Cooling fan: 1x 7×7 cm / up to 3000rpm

Installation

1. Turn OFF the power to your computer and any other connected peripheral devices.
2. Unplug the power cord from the back of the computer and remove your computer‘s cover.
3. Put the Backplane in one free 2x 5.25″ bay and fix it with the screws.
4. Connect the SATA connectors to the referring connectors on the main board. (SATA cables not included)
5. Connect the 2x internal Molex power cables to the power supply of your PC. Replace the computer cover and reconnect the power cord.

© Copyright 2021 by RaidSonic Technology GmbH. All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the specifications and/or design of the above mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic Technology GmbH assumes no responsibility for any differences between the product mentioned in this manual and the product you may have. Windows and the Windowslogo are registered trademarks of Microsoft Corporation, Apple and Apple OS, MAC, iTunes and Machitosh are registered trademarks of Apple Computer Inc. All other trademarks and brand names are the property of their respective owners.

References

• ICY BOX
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>