Bisofice A81 Thermal Portable Printer User Manual

May 15, 2024
Bisofice

Bisofice A81 Thermal Portable Printer THERMAL PRINTER
USER’S MANUAL

Product list

Bisofice A81 Thermal Portable Printer| Printer
---|---
| Manual
| Data cable

Product introduction

Bisofice A81 Thermal Portable Printer - overview

  1. Power button
    (Hold for 3 seconds to turn on/turn off)

  2. USB interface
    (Can be connected to a charging bank or a cell phone charger)

  3. Open key
    (At the same time press left e right to open the cover and change the paper)

LED status

Light Description Troubleshooting
Green Normal operation
Red a . The printer head is overheated b. Charges c. Top cover a . The

printer will come on automatically Resume once the printer header is cooled.
b. Once fully charged, The The light turns green.
c. Close the correctly top cover.
Flashing Red| Low electrical quantity| Please charge the printer
Blue| Mating success BT| BT connected success
Flashing Blue| BT is starting o initialization failed| please close the app first,restart the printer,wait for the blue light to no longer flash,and then connect the printer in the app

Download and connect App

Download

  1. Search the App Store/Google Play for “Luck Jingle” download
  2. Scan the corresponding QR code to download

|
---|---
https://apps.apple.com/us/app/id1515245571| https://play.google.com/store/apps/details?id=com.dingdang.newprint&hl=nl&gl=US

Connect the device Long press the button turn on until the blue light flashes and enter In the “Luck Jingle” app, turn on the BT of your phone mobile phone iOS phone: please turn on the BT mobile phone
Android phone: please turn on the BT mobile phone and GPSBisofice A81
Thermal Portable Printer - app 2

  1. Click the small printer icon in the corner top right
  2.  Click to search for BT
  3. Click to connect
  4. Connected successfully, a small green icon comes displayed in the top right corner

Note: Don’t look for printer connection in settings
Cellphone Bluetooth, but turn on the BT function and search for i devices connected in the APP and then connect them.

Download drivers

Download the driver Download the printer driver (Window or MAC ) on the official website at: http://www.luckjingle.com/driverDetail?id=4

Install the driver for Windows

Turn on the printer, The printer connects to the computer via USB, Locate the downloaded file “A81 Windows Driver” file and open it.
Bisofice A81 Thermal Portable Printer - app 31. Click the “Install” button e wait for installationBisofice A81 Thermal
Portable Printer - app 42. After the installation is successful, Click “Finish” to exit from the interface

Note: Before installing the driver, turn off your antivirus software computer. The printer must be connected to power electrical and computer and power-on status.

Install the MAC driver

Turn on the printer, The printer connects to computer via USB, Locate the downloaded file “A81 Windows Driver” file and open it.
1. Click “open” and continue to install the printer.
Follow the installation suggestion until you see ” The installation
2. Set the printer as default mode. The steps illustrated to operat 1. Open System Preferences, click “Printers and Scanners”  Bisofice A81 Thermal
Portable Printer - app 62. Click here to add a printer, fax or scanner. 3. Select YXWL A81 USB, Click “Add” to add the printer. Bisofice A81 Thermal Portable Printer - app
84. As shown in the figure, complete the printer configuration.

Paper installation guide

  1. Cover open
    Bisofice A81 Thermal Portable Printer - app 9

  2. Lay down the paperBisofice A81 Thermal Portable Printer - app 10The end of the paper must be exposed to the machine

  3.  Closing capBisofice A81 Thermal Portable Printer - app 11

  4. The is used paper limiterBisofice A81 Thermal Portable Printer - app 12Push the paper limiter against the edge of the roll

Charging instructions

  1. It is recommended to use the mobile phone charger to charge, input charge 5V/2A
  2. It is recommended to charge the first time after purchase
  3. Charge once every three months, otherwise it is easy to cause lithium battery, long time natural leakage and can not load the phenomenon

Attention

  1. In a residential environment, the use of this device may cause radio interference
  2. The factory standard of this product does not include a power adapter. If you use an adapter power supply to recharge, you need to purchase a CE certified 5V/2A power adapter which meets standards
  3. This is a professional product, please use it original battery.
  4. If you replace the original battery or use the original one incorrect Model batteries may explode.

Safety and precautions

Safety and precaution

  1. There is a built-in lithium battery, yes Please do not use it in the environment with temperature above 40℃; keep away from fire and other heat and non-heat sources put it in the hot sun, such as closed car;
  2. Children must be charged and used under the adult supervision. After fully charged, be sure to take out the charging line in time to avoid overheating,  short circuit or fire;
  3. Don’t put the product into fire or water to avoid short circuit battery or fire or burn;
  4. working environment: 0°C-40°C ambient temperature, relative humidity, 30% -85% RH Use in ambient (non-condensing), please do not exceed the temperature range recommended.
  5. If you suspect there is a problem with the battery, yes Please contact after-sales service center for assistance.

Please do not touch the print head directly
Avoid damage, especially after printing, do not touch directly the print head to avoid overheating.

Cleaning print head

Bisofice A81 Thermal Portable Printer - app
13

  1. Please turn off the printer, open the cover paper and take the roll of paper
  2. Soak cotton cloth or cotton swabs in it. On medical alcohol, along the center of the print head around the direction to wipe gently
  3. After cleaning the print head, do not use the printer immediately. Please wait 1′ 2 minutes until the alcohol has completely evaporated.

Product Specifications

Product model A81
Print mode Sensitive to the heat of the line
Printing speed 10 mm/s (max)
Input power 5V ****2A
Machine size 290 x 90 x 60 mm
Weight 756 g
Kind of paper Thermal paper
Instruction format YPL
Graphic print Support
Human machine interface Key LED indicator
Communication interface USB / BT2.0 & BT4.0
Operating temperature (C) 0℃ ~ +40℃
Working humidity 30% ~ 85% RH (non-condensing)
Storage temperature (C) -20℃ ~ +60℃
Storage humidity 10% ~ 90% RH (non-condensing)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals