Steamfast SF-760 Cordless Steam Iron Owner’s Manual
- June 6, 2024
- Steamfast
Table of Contents
C ORDLESS STEAM IRON
OWNER’S GUIDE
C ORDLESS STEAM IRON OWNER’S GUIDE READ ALL INSTRUCTIONS BEFORE USING
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered part of the
product. They contain important information about safety and use. Before using
the product, please familiarize yourself with all operating and safety
instructions. Please keep all documents for future reference and pass these
documents on, together with the product, to any future owner. See
steamfast.com to view, download and print the most current version of these
instructions.
INTENDED USE : This product is intended to be used indoors for ironing
and garment steaming in the United States. This product is not intended for
commercial or industrial use. The manufacturer assumes no responsibility for
damage or injury due to unauthorized use or product modification. Failure to
follow these directions will void the product warranty.
WARNING : Risk to Children and Impaired Persons
– Supervision is required during the installation, operation,cleaning, and
maintenance of this product by children age 12 and younger and anyone with
reduced physical, sensory
or mental capabilities. Children should be supervised to ensure that they do
not play with the appliance, its parts, and packaging material. Directions to
reduce risk of fire, electrical shock, and injury: When using your appliance,
basic precautions should always be followed, including the following:
– Read all instructions before use.- Use caution when handling this steam
iron. Burns could occur from touching hot metal parts, hot water, or steam.
Use 2 special care to avoid contact with hot water when turning the
product upside down to empty the reservoir.
– To reduce the risk of contact with hot water, test whether steam is ready
before each use while carefully holding the product away from your body. If no
steam appears, wait a few more minutes and test again. Do not look into the
appliance or use your hands or other objects to check for steam.
– Do not leave the appliance unattended while connected.
– To reduce the risk of electric shock, do not immerse the appliance in water
or other liquids. – Unit is only meant to be used with recommended
accessories. Using other types of attachments may cause damage to the unit or
injury. – Always disconnect the appliance from the electrical outlet when
filling with water or emptying, and when not in use.
– Do not allow the cord to touch hot surfaces. Let the appliance cool
completely before putting it away. Securely store the cord in provided storage
on base.
– Never yank cord to disconnect from outlet. Instead, grasp just the plug and
pull to disconnect. – Do not operate the appliance with a damaged cord, or if
the appliance has been dropped or damaged. To reduce the risk of electric
shock, do not disassemble or attempt to repair the appliance. All repairs must
be performed by a qualified service professional. Incorrect reassembly or
repair could cause a risk of fire, electric shock, or injury when the
appliance is used.
– If Heating Indicator Light does not illuminate when Temperature Control Dial
is turned to a selected heat setting, unit is not operating normally.
Immediately unplug and have
a unit serviced by qualified service personnel.
– When filling Water Tank, only water should be used in the unit – other
cleaning agents could damage the unit or cause injury.
Distilled or demineralized water is highly recommended, in order to minimize
the potential build-up of mineral deposits. Do not overfill unit.
– Do not remove the water tank cap during use. Allow the unit to cool
completely before refilling. – Do not attempt to use the steam function
without properly filling
Water Tank.
– To reduce the risk of contact with hot water emitting from steam vents,
check the appliance before each use by positioning it away from body and
pressing Steam Burst Button. Do not operate the unit if steam vents are
blocked.
– Do not allow the power cord to touch hot surfaces (such as Ironing Plate)
during use. Store cord inside the base.
– Always allow the unit to cool completely (at least 30 minutes) before
storing. Place the unit on base when cooling, to avoid heat damage to
surfaces.
– The iron must be used on a stable surface and rested on the base when not in
use.
– A loose fit between the wall outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue the use of the product in
this outlet. Contact a qualified electrician to replace loose or worn outlets.
– To reduce the likelihood of circuit overload, do not operate
another high wattage appliance on the same circuit. – If an extension cord is
absolutely necessary, a 15 amp rated cord should be used. Cords rated for less
amperage may overheat. Care should be taken to arrange the cord so that the
cord cannot be pulled or tripped over.
– This appliance has a polarized plug (one blade is wider than the other.) To
reduce the risk of electrical shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
– Use appliance only for its intended use.
– The iron must only be used with the BASE provided.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Please refer to our website for the most current version of our owner’s guide.
READ AND SAVE THESE INSTRUCTIONS
- The Ironing Plate is the heated, non-stick surface that is used to press fabrics, remove wrinkles and create creases.
- The Main Body contains the unit’s internal heating components
- The Base works as a docking and reheating station.
- The Carry Case provides a convenient, portable option for moving and storing the Cordless Steam Iron.
- The Heating Indicator Light will turn off when the Ironing Plate’s set temperature is reached.
- The Water Tank Cap covers the Water Tank fill hole. The Cap will “click” when completely shut.
- The Water Tank is designed to hold a maximum of 6.09 oz (180 ml) of water.
- The Continuous Steam Switch controls the unit’s continuous stream feature. When Switch is in the position, continuous steam is inactivated. When Switch is in the position, continuous steam is activated
- When pressed, the Steam Burst Button provides a quick, powerful burst of steam for tough wrinkles.
- .The Spray Mist Button provides a mist of water for quick wrinkle remover.
- The Spray Mist Outlet is where the water exits for the Spray Mist feature.
- The Handle is designed for easy control and navigation of the unit.
- The Temperature Control Dial is turned to select the various Ironing Plate heat settings based on your fabric and to turn the unit OFF.
- The Fill Cup is designed to help you easily and consistently fill the Water Tank.
- When finished with your ironing and steaming tasks, conveniently store the power cord in the Power Cord Storage located in the base (not shown).
FILLING WATER TANK (FOR STEAM IRONING)
1. Turn off the iron and unplug the Base.
2. Place the unit on a flat surface and hold the iron upright.
3. Use provided fill cup to fill Cordless Iron with water to MAX fill line on
Water Tank. Do not overfill unit.
NOTE : In order to extend the life of your unit and keep it functioning
at it’s maximum potential, it is highly recommended that distilled or de-
mineralized water be used in Water Tank.
4. When finished filling Water Tank, close Water Tank Cap. Cap will “click”
when completely shut. When the water level becomes low:
1. Turn off the iron and unplug the base. Allow cooling for at least 5
minutes.
2. Follow STEPS 2-4 above.
3. Plug the power cord back in and resume ironing as usual.
1. Turn off the iron and unplug the Base.
2. Place the unit on a flat surface and hold the iron upright.
3. Use provided fill cup to fill Cordless Iron with water to MAX fill line on
Water Tank. Do not overfill unit.
NOTE : In order to extend the life of your unit and keep it functioning
at it’s maximum potential, it is highly recommended that distilled or de-
mineralized water be used in Water Tank.
4. When finished filling Water Tank, close Water Tank Cap. Cap will “click”
when completely shut.
When the water level becomes low:
1. Turn off the iron and unplug base. Allow cooling for at least 5 minutes.
2. Follow STEPS 2-4 above.
3. Plug the power cord back in and resume ironing as usual.
1. Turn off the iron and unplug the Base.
2. Place unit on a flat surface and hold the iron upright.
3. Use provided fill cup to fill Cordless Iron with water to MAX fill line on
Water Tank. Do not overfill unit.
NOTE: In order to extend the life of your unit and keep it functioning at
its maximum potential, it is highly recommended that distilled or de-
mineralized water be used in Water Tank. 4. When finished filling Water Tank,
close Water Tank Cap. Cap will “click” when completely shut. When the water
level becomes low: 1. Turn off iron and unplug base. Allow to cool for at
least 5 minutes.
2. Follow STEPS 2-4 above.
3. Plug the power cord back in and resume ironing as usual.
OPERATING UNIT
Your SF-760 Cordless Iron comes with a built-in Auto-Off Feature. When the
Cordless Iron is placed on the Base and powered on, the iron will
automatically shut off if not removed from Base after 8 minutes. Always place
Iron securely on the base when not in use. Do not rest Iron on other surfaces
or attempt to stand Iron upright.Burn Hazard. Do NOT touch the Ironing Plate
or surrounding area. Discontinue use if the iron has been dropped and shows
visible damage. If visible damage occurs, do not return iron to the base while
the base is powered on.
STEAM IRONING
1. Follow the Filling Water Tank procedure on pg 8.
2. Plug the power cord into a convenient electrical outlet.
3. Set the Cordless Iron on the Base, ensuring back of the Iron sits flush
against base.
4. When the Heating Indicator Light turns off, the soleplate has reached its
set temperature.
NOTE: It is recommended to start with a lower temperature first, as high
settings designed for heavy material can damage delicate fabrics.
FABRIC | TEMPERATURE CONTROL | TEMPERATURE REQUIREMENT |
---|---|---|
Slik | Low Temperature | |
Wool | Medium Temperature | |
Cotton, Linen | High Temperature |
15. To Produce Steam
For Continuous Steam: Once the Heating Indicator Light hasi turned off
(indicating selected ‘Ironing Plate temperature has been reached), remove the
Cordless Iron from the base and move the Continuous Steam Switch to the
position. After a few seconds, the unit will automatically begin to emit steam
from the Ironing Plate.
• For Steam Burst: Once the Heating Indicator Light has turned off (indicating
selected Ironing Plate temperature has been reached, remove the Cordless Iron
from the base, leave the Continuous Steam Switch in the position, and press
the Steam Burst button.
NOTE: Steam can only be produced when the Ironing Plate temperature is
set at or O. Steam cannot be produced at the lowest temperature setting.
6. Continue with steam ironing tasks.
IMPORTANT : The Ironing Plate will maintain its set temperature for an approximately 30 seconds. After 30 seconds, set the Cordless Iron back on the Base to reheat the Ironing Plate. This will take approximately 7 seconds. The Heating Indicator Light will turn on when the Cordless Iron is set on the base and after approximately / seconds, the light will turn off indicating the Cordless Iron is reheated and ready for use again. 6
DRY IRONING
1. Plug the power cord into a convenient electrical outlet
2. Set the Cordless Iron on the Base, ensuring back of Iron sits flush
against base.
3. When Heating Indicator Light turns off, the Ironing Plate has reached its
set temperature. Be sure to set Continuous Steam Switch to position to avoid
water leakage.
DRY IRONING: Follow the fabric guidance chart on pg 9 to select the
appropriate Sole Plate temperature for your fabric.
4. Continue with steam ironing tasks.
IMPORTANT : The Ironing Plate will maintain its set temperature for an
approximately 30 seconds. After 30 seconds, set the Cordless Iron back on the
Base to reheat the Ironing Plate. This will take approximately 7 seconds. The
Heating Indicator Light will turn on when the Cordless Iron is set on the base
and after approximately 7 seconds, the light will turn off indicating the
Cordless Iron is reheated and ready for use again.
CLEANING & STORAGE
1. Turn Temperature Control Dial to OFF position. To eliminate the potential
for water leakage, move Continuous Steam Switch to OFF position. Place unit
securely on the Base. i Unplug the power cord. Allow the unit to cool for at
least 30 minutes. 3. Once cooled, open the Water Tank Cap and drain any
remaining water into a sink or tub. Close Cap when finished. 4. Wipe Main Body
and Ironing Plate with a soft cloth lightly moistened with water.
• DO NOT clean Ironing Plate with detergents or descalers.
• DO NOT clean Ironing Plate with abrasive or corrosive products.
• DO NOT submerge the unit or hold the unit under running water.
5. If desired for storage or moving Cordless Iron, place unit on the base and
securely connect the Carry Case to Base. The clips will “click” into place
when securely fastened. 6. Place unit in a cool, dry location.
MINERAL BUILD-UP
1. Follow STEPS 1-3 under the CLEANING & STORAGE section above; however,
leave Water Tank Cap open.
2. Make a mixture of 0.5 oz. distilled water and 0.5 oz. vinegar.
3. Using included Measuring Cup, pour the water-vinegar solution into Water
Tank. Close Water Tank Cap.
4. Follow normal steam ironing procedure, as outlined on Page 9-10. Allow
unit to steam out full contents of Water Tank. When finished, turn Continuous
Steam Switch to OFF X position and place unit securely on the Base. 5. Allow
to cool for 5 minutes, then refill Water Tank with fresh distilled water.
Repeat STEP 4 until vinegar odor dissipates. 6. Store unit as normal.
Troubleshooting
PROBLEM | POSSIBLE CAUSE & SOLUTION |
---|---|
Unit fails to heat up. | The base is not plugged in. Plug the power cord into |
an electrical outlet.
Household circuit breaker/ground fault interrupter has tripped or blown a
fuse. Reset circuit breaker/ground fault circuit interrupter, or replace the
fuse. For assistance, contact a licensed electrician.
The temperature Control Dial has not been turned to a heat setting.
The unit is leaking water.| The Continuous Steam Switch is in this position,
but Temperature Control Dial is not set to a high enough heat setting. Refer
to the Steam Ironing section for further instructions.
The water tank is overfilled. Do not fill past the MAX line.
There is mineral build-up. Refer to MINERAL BUILD-UP section for further
instructions.
Unit is not producing continuous steam| The Continuous Steam Switch is not set
in the correct position. Ensure it is set to the position.
The Temperature Control Dial is not set to high enough heat. Refer to the
Steam Ironing section for further instructions.
The Cordless Iron has been left off the base for more than 30 seconds. Place
iron back on the base and wait for 7 seconds for reheat. See pg 10 for further
instructions.
CONSUMER SERVICES
For problems with your Cordless Steam Iron, please refer to the
troubleshooting guide located il rt bove. Additional inquiries should be
directed to our consumer support services through our Web site, steamfast.com.
II f f you do not have internet access, you may also contact our Consumer
Service Department by telephone, at
1-800-711-6617.
CONSUMER SERVICES or problems with your Cordless Steam Iron, please refer to
the troubleshooting guide located il rt bove. Additional inquiries should be
directed to our consumer support services through our Web site, steamfast.com.
II f f you do not have internet access, you may also contact our Consumer
Service Department by telephone, at
1-800-711-6617.
C ONSUMER SERVICES or problems with your Cordless Steam Iron, please refer
to the troubleshooting guide located il rt bove. Additional inquiries should
be directed to our consumer support services through our Web site,
steamfast.com. II f f you do not have internet access, you may also contact
our Consumer Service Department by telephone, at
1-800-711-6617.
NOTE: In order for our Consumer Service representatives to help you as quickly
and efficiently as possible, please have the following information ready
before calling:
- Purchase information (where and when you purchased this product) • Copy of purchase receipt/proof of purchase • Product serial number (located on electrical specification label on the bottom of the unit)
- For information regarding your 2 Year Limited Warranty, refer to page 14 of this manual.
- In order for our Consumer Service representatives to help you as quickly and efficiently as possible, please have the following information ready before calling:
- Purchase information (where and when you purchased this product) • Copy of purchase receipt/proof of purchase • Product serial number (located on electrical specification label on the bottom of the unit)
- For information regarding your 2 Year Limited Warranty, refer to page 14 of this manual.
- In order for our Consumer Service representatives to help you as quickly and efficiently as possible, please have the following information ready before calling:
- Purchase information (where and when you purchased this product)
- Copy of purchase receipt/proof of purchase
- Product serial number (located on electrical specification label on the bottom of the unit)
For information regarding your 2 Year Limited Warranty, refer to page 14 of
this manual.
2-YEAR LIMITED WARRANTY
What Is covered Steamfast, a division of Vornado Air, LLC (“Steamfast”).
Subject to the terms and conditions of this 2-Year Limited Warranty
(“Warranty”) as set forth below, Steamfast warrants to the original consumer
or purchaser (“Buyer”) that this Steamfast®-branded steam product, excluding
all accessories and attachments, (the “Product”) is to be free from defects in
material and workmanship for a period of two (2) years from the date of
purchase when used and maintained in accordance with the Owner’s Guide (the
“Warranty Period”). In the event Buyer notifies Steamfast of a defect in the
Product within the Warranty Period, Steamfast will replace the Product and/or
defective component parts, as applicable and necessary. Any such replacement
will be made at no charge to Buyer for parts or labor, provided that Buyer
shall be responsible for all shipping and transportation costs associated with
returning the Product to Steamfast for inspection and covered replacement.
What Is not covered This warranty shall not be applicable to damage or loss
caused in whole or in part by:
- Repairs, modifications or alterations to the Product by anyone other than Steamfast.
- Use or operation of the Product outside the permitted or intended uses described by Steamfast in the Owner’s Guide, or other careless operation, handling, misuse, or abuse of the Product.
- Lack of proper maintenance or timely cleaning of the Product as specified in the Owner’s Guide.
- Use of the Product other than for normal household purposes.
- Normal wear and tear
- Used consumable parts, accessories, and attachments, including, but not limited to, brushes, hangers, scrub pads and mop pads.
- Use of parts and accessories other than those produced or recommended by Steamfast.
- Cosmetic damage, such as scratches, nicks, and dents
- Damage caused by accident, water, flood, fire, or other acts of nature or external causes.
Warranty limitations and exclusions
• NO OTHER EXPRESS WARRANTY IS GIVEN BY STEAM FAST TO THE BUYER AND NO
REPRESENTATIVE HAS THE AUTHORITY TO MAKE REPRESENTATIONS OTHER THAN THOSE
PROVIDED HEREIN. • THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION
ON THE FACE HEREOF AND ALL IMPLIED WARRANTIES, SPECIFICALLY THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
EXPRESSLY LIMITED TO THE DURATION OF THE WARRANTY PERIOD UNLESS A SHORTER
PERIOD IS PFRMITTM RY I AW• STEAMFAST’S REPLACEMENT OF THE PRODUCT IS THE
EXCLUSIVE REMEDY. UNDER NO CIRCUMSTANCES SHALL STEAM FAST BE LIABLE TO BUYER
OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR OTHER
DAMAGES, EVEN IF STEADFAST HAS BEEN ADVISED OF OR COULD REASONABLY FORESEE THE
POSSIBILITY OF SUCH DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR
DAMAGE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT OR UNDER
ANY OTHER THEORY OF LAW.
14 I ENGLISH
• THIS WARRANTY GIVES BUYERS SPECIFIC LEGAL RIGHTS. BUYERS MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, AND SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO THE BUYER.
How do you register the Warranty Buyer must complete an application to
register this Warranty within sixty (60) days following the date of purchase.
Buyers may either visit Steamfast’s website at www.steamfast.com and complete
an online application or mail a completed application to Steamfast. Failure to
register this Warranty within sixty (60) days following the date of purchase
will render this warranty null and void.
Warranty Service For warranty service, call
1-800-711-6617 or email
consumerservice@steamfast.com to
obtain a Return Authorization (“RA”) form. Include the Product model number
and serial number, as well as the Buyer’s name, address, city, state, zip
code, and phone number when contacting Steamfast for warranty service. The
buyer may be required to provide the original sales receipt for purposes of
verifying the date of purchase. After receiving the RA form, the Product must
be shipped, postage
Steamfast Attn:
Warranty & Repair
415 E. 13th Street
Andover, KS 67002
To assure proper handling, packages must be clearly marked with the RA number.
Packages not clearly marked with the RA number may be refused at the receiving
dock. Important : After receiving return authorization, carefully pack the
Product to avoid damage in shipping. Damage in shipping is not covered by the
Warranty and shall be the sole responsibility of the Buyer. Damage or loss not
covered by this Warranty or occurring outside the Warranty Period will require
a fee to cover the cost of handling and shipping. All such fees and costs
shall be the sole responsibility of the Buyer. Please allow at least 1-2 weeks
for the return of the Product after it is received by Steamfast. For ease of
recordkeeping, it is recommended that Buyer staple or attach the original
sales receipt to this Owner’s Guide and record the Product serial number
(located on the Product specifications decal) here:
© 2021 Vornado Air, LLC • Andover, KS 67002 Specifications subject to change
without notice. Steamfast® is a trademark owned by Vornado Air, LLC. Patented.
US Pat. No. 7,062,870 B1 Manufactured in China. Steamfast Consumer Service W:
steamfast.com • P: 1-800-711-6617 • E:
consumerservice@steamfast.com
Steamfast
415 East 13th Street,
Andover, KS 67002 1-800-711-6617
I steamfast.com I consumer
service@steamfast.com
References
- Steamfast – steam mops, fabric steamers, steam cleaners, steam presses, accessories, Steamfast manuals and support information
- Contact Us - Vornado
- Steamfast – steam mops, fabric steamers, steam cleaners, steam presses, accessories, Steamfast manuals and support information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>