SPEKTRUM S2200 G2 AC Smart Charger (2 x 200W) Instruction Manual
- June 6, 2024
- SPEKTRUM
Table of Contents
- Meaning of Special Language
- Age Recommendation: Not for children under 14 years. This is not a toy.
- General Charging Warnings
- Specifications
- Diagram
- Navigating the Charger
- Operating the Charger
- Screen Icons
- Charger Errors
- Additional Information
- Limited Warranty
- WARRANTY SERVICES
- Warranty and Service Contact Information
- FCC Information
- IC Information
- Compliance Information for the European Union
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
S2200 G2 AC Smart Charger (2 x 200W)
Instruction Manual Bedienungsanleitung Manuel d’utilisation Manuale di Istruzioni (BC)
NOTICE
All instructions, warranties, and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or resources tab for this product.
Meaning of Special Language
The following terms are used throughout the product literature to indicate
various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the
probability of property damage, collateral damage, and serious injury OR
create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the
probability of physical property damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility
of physical property damage AND little or no possibility of injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the
features of the product before operating. Failure to operate the product
correctly can result in damage to the product, personal property and cause
serious injury.
This is a sophisticated hobby product. It must be operated with caution and
common sense and requires some basic mechanical ability.
Failure to operate this product in a safe and responsible manner could result
in injury or damage to the product or other property.
This product is not intended for use by children without direct adult
supervision. Do not attempt disassembly, use incompatible components, or alter
the product in any way without the approval of Horizon Hobby, LLC. This manual
contains instructions for safety, operation, and maintenance. It is essential
to read and follow all the instructions and warnings in the manual, prior to
assembly, setup or use, in order to operate correctly and avoid damage or
serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
NOTICE: This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge
unless they have been given supervision or instruction concerning the use of
the appliance by a person responsible for their safety.
WARNING: To reduce the risk of fire or electric shock, carefully follow
these instructions.
General Charging Warnings
WARNING: Failure to exercise caution while using this product and comply with the following warnings could result in a product malfunction, electrical issues, excessive heat, FIRE, and ultimately injury and property damage.
-
NEVER LEAVE CHARGING BATTERIES UNATTENDED DURING USE.
-
NEVER CHARGE BATTERIES OVERNIGHT.
-
Never attempt to charge dead, damaged, or wet battery packs.
-
Never attempt to charge a battery pack containing different types of batteries.
-
Never allow children under 14 years of age to charge battery packs.
-
Never charge batteries in extremely hot or cold places or place in direct sunlight.
-
Never charge a battery if the cable has been pinched or shorted.
-
Never connect the charger if the power cable has been pinched or shorted.
-
Never connect the charger to an automobile 12V battery while the vehicle is running.
-
Never attempt to dismantle the charger or use a damaged charger.
-
Never attach your charger to both an AC and a DC power source at the same time.
-
Never connect the input jack (DC input) to AC power.
-
Always use only rechargeable batteries designed for use with this type of charger in the correct programming mode.
-
Always inspect the battery before charging.
-
Always keep the battery away from any material that could be affected by heat.
-
Always monitor the charging area and have a fire extinguisher available at all times.
-
Always end the charging process if the battery becomes hot to the touch or starts to change form (swell) during the charging process.
-
Always connect the charging cable to the charger first, then connect the battery to avoid a short circuit between the charge leads.
Reverse the sequence when disconnecting. -
Always connect the positive red leads (+) and negative black leads (–) correctly.
-
Always disconnect the battery after charging, and let the charger cool between charges.
-
Always charge in a well-ventilated area.
-
Always terminate all processes and contact Horizon Hobby if the product malfunctions.
-
Charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property.
-
The socket outlet shall be installed near the equipment and shall be easily accessible.
-
For indoor use, do not expose to rain or moisture.
-
Never impact or alter the batteries.
WARNING: Never leave the charger unattended, exceed maximum charge rate,
charge with non-approved batteries, or charge batteries in the wrong mode.
Failure to comply may result in excessive heat, fire, and serious injury.
CAUTION: Always ensure the battery you are charging meets the
specifications of this charger and that the charger settings are correct. Not
doing so can result in excessive heat and other related product malfunctions,
which can lead to user injury or property damage. Please contact Horizon Hobby
or an authorized retailer with compatibility questions.
Specifications
Output Port Connector| IC3®/IC5®selectable
(EC3/EC5™compatible)
---|---
Input Voltage| 100-240V AC
Charge Current| 0.1 – 20.0A
Discharge Current| 0.1 – 1.5A
USB Output| 5V / 2A
Max. Charge Power| 2 x 200W
Max. Discharge Power| 10W
Balance Current| 1.5A/cell
---|---
Balance Cells| 1-6S
Supported Battery Types* (cell count)| LiFe/Libn/LiPo/LiHv (1-6S)
NiMFVCd (1-16S)
Pb (1-12S)
Display| 3″ 320 x 240 IPS LCD
Operating Temperature| 0-40°C (32-104°F)
- Spektrum G2 Smart chargers are compatible with all Spektrum G1 Smart batteries.
Diagram
|
---|---
A| Display screen
---|---
B| Charge ports (1C3s, IC5s selectable; EC3s, EC5® compatible)
C| Balance ports
D| USB port
E| Upgrade port
F| AC power input (AC 100-240V)
G| Power switch
H| Cooling fan
| Channel 1 button
J| Channel 2 button
K| Back button
L| Scroll buttons
M| Select button
Navigating the Charger
Navigation of the charger menus is accomplished using the push buttons on the top of the charger.
- Press the Channel 1 or 2 button to select the desired charging port.
- From the channel home menu, press and hold the Select button to enter the charger settings menu for that channel.
- Press the Menu/Select button to select a menu item.
- Press the Down arrow button to scroll down a menu list.
- Press the Up arrow button to scroll up a menu list.
- Press the Back button to return to the previous menu.
Charge port connector selection
Each charging port is capable of charging with an IC3 or IC5 connector.
• Slide the port cover down to use the IC3 connector.
• Slide the port cover up to use the IC5 connector.
Operating the Charger
Before operating the charger, know your battery’s specifications and any battery-specific safety warnings.
-
Connect the AC power cord to the charger and to an appropriate power supply.
-
Power on the charger. The charger will initialize and display the home screen, indicating the charger is ready to be used.
-
Connect the battery to the port on the front of the charger.
-
Connect the battery balance lead, if available, to the left side of the balance port (labeled 2–6S).
Smart Batteries : If charging a Spektrum Smart Battery, the Battery Cell Count, Battery Type, Battery Charge Current Rate, and Battery Capacity are set automatically and the charger will begin charging automatically when the battery and the balance lead (if available) are connected to the charger. -
Press and release the menu button to display the Charger Settings list:
Charger Settings**** Task| Select Charge, Discharge, or Storage
---|---
Battery (Type)| Select the appropriate battery chemistry
Cells (Cell Count)| Set the number of cells in the battery (this value auto- detects if using a Spektrum Smart battery or if the battery balance lead is connected to the balance port)
Current| Set the charge current
Start| Start the charge cycle
Smart Battery Settings| Configure the settings on your Smart battery
System Settings| Charger settings
Charger History| Displays number of charger cycles on the day, the total number of cycles, charger temperature, and input power -
Select the desired Task.
-
Confirm the settings are correct for the battery being charged.
WARNING: Always check charging parameters before initiating the charging process. Charging any battery with improper settings, including charging a battery in the wrong mode, can result in property damage and fire. -
Scroll to the Start menu item.
-
Press and release the Select button to begin charging.
During the charging process:
-
While the battery is charging the main screen will provide:
Charged percent
• Battery data
• Charge rate
• Capacity charged
• Charge time remaining (Smart batteries only)
• Total charge Time -
Scroll to the next screen to see additional cell voltage information.
-
Scroll to the last screen to see the battery’s internal resistance
-
When the fast charge cycle is complete, the charger will beep once and the Battery Bar will change to green. The charger is balancing the battery cells.
To stop the charging cycle:
1. Press and release the back button during the charge or press and hold the
menu button.
2. Select the Stop menu item. The charger will return to the home screen.
WARNING: Always stop the charging cycle or remove power supplied to the charger if you notice any irregularities (like a swollen battery) during charging.
When charging is complete:
The charger will beep once to indicate fast charging is done.
When the charger is finished balancing the battery it will double beep twice.
1. The main screen will display a green battery bar at the top to indicate
the battery is full and the charging process has finished.
2. The total capacity charged and total charge time will be displayed.
3. Disconnect the battery from the charger. The battery is ready and the
charger will return to the home screen.
Screen Icons
Icon | Description |
---|---|
**** | Charging |
Current | |
Task | |
Start | |
Back | |
Forward | |
Input Power | |
Settings (Battery/System) | |
Temperature | |
Date | |
Internal Resistance | |
Battery History | |
Mode | |
Icon | Description |
--- | --- |
**** | Input Voltage |
Output Voltage | |
Storage Voltage | |
Backlight | |
Volume | |
Touch Sensitivity | |
Completion Tone | |
Fault/Error/Fault Log | |
Cycles | |
No Battery Detected | |
Charger/ Charger History | |
Info | |
Chemistry |
Smart Settings
The Smart selection is available if a Smart battery is connected. Smart
settings include:
Auto Storage| Select to run Auto Storage function with a delay between 12 and
240 hours
---|---
Charge Current| Change the default charge current for your Smart battery
Charge Voltage| Select the charge voltage for your Smart battery
Storage Voltage| Select the storage voltage for each cell
Battery History| Provides a number of battery cycles, battery temp, and
production date
Fault Log| Provides a list of faults, including over-voltage, under-voltage,
or over-temperature, and the date of the exception
Back| Return to the home screen
System Settings
Backlight | Low, Medium, High |
---|---|
Volume | Off, Low, Middle, High |
Completion Tone | Single or Repeat |
Touch Sensitivity | Low, High |
Language | Select language |
System Self-Checking | Initiates a charger self-check. Do not connect a battery |
to the output port while the self-check is running.
System Information| View the charger’s firmware version
Back| Return to the home screen
Charger Errors
If the charger displays an error, follow the on-screen prompts to remedy the error. If necessary, disconnect the battery from the output and balance ports, disconnect the power supply and restart the charger.
Additional Information
Visit the Spektrum S2200 charger product page at www.horizonhobby.com for information on firmware updates and installation instructions as well as optional accessories available.
Limited Warranty
What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the
product purchased (the “Product”) will be free from defects in materials and
workmanship for a period of 1 year from the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage,(ii)
damage due to acts of God, accident, misuse, abuse, negligence, commercial
use, or due to improper use, installation, operation, or maintenance, (iii)
modification of or to any part of the Product, (iv) attempted service by
anyone other than a Horizon Hobby authorized service center, (v) Product not
purchased from an authorized Horizon dealer, or (vi) Product not compliant
with applicable technical regulations or (vii) use that violates any
applicable laws, rules, or regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE,
HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, ND HEREBY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF NON- INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR
PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE
PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be
that Horizon will, at its option, either (i) service, or (ii) replace, any
Product determined by Horizon to be defective. Horizon reserves the right to
inspect any and all Product(s) involved in a warranty claim. Service or
replacement decisions are at the sole discretion of Horizon. Proof of
purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS
PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN
ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
TORT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER THEORY OF LIABILITY, EVEN IF
HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no
event, shall the liability of Horizon exceed the individual price of the
Product on which liability is asserted. As Horizon has no control over use,
setup, final assembly, modification, or misuse, no liability shall be assumed
nor accepted for any resulting damage or injury. By the act of use, setup, or
assembly, the user accepts all resulting liability.
If you as the purchaser or user are not prepared to accept the liability
associated with the use of the Product, the purchaser is advised to return the
Product immediately in new and unused condition to the place of purchase.
Law
These terms are governed by Illinois law (without regard to conflict of law
principles). This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. Horizon reserves the right
to change or modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty
support or service. Once assembly, setup, or use of the Product has been
started, you must contact your local distributor or Horizon directly. This
will enable Horizon to better answer your questions and service you in the
event that you may need any assistance. For questions or assistance, please
visit our website at www.horizonhobby.com, submit a Product Support Inquiry,
or call the toll-free telephone number referenced in the Warranty and Service
Contact Information section to speak with a Product Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the
country you live and use the Product in, please use the Horizon Online Service
Request submission process found on our website or call Horizon to obtain a
Return Merchandise Authorization (RMA) number. Pack the Product securely using
a shipping carton. Please note that original boxes may be included, but are
not designed to withstand the rigors of shipping without additional
protection. Ship via a carrier that provides tracking and insurance for lost
or damaged parcels, as Horizon is not responsible for merchandise until it
arrives and is accepted at our facility. An Online Service Request is
available at http://www.horizonhobby.com/content/service-center_render-
service-center. If you do not have internet access, please contact Horizon
Product Support to obtain an RMA number along with instructions for
submitting your product for service. When calling Horizon, you will be asked
to provide your complete name, street address, email address, and phone number
where you can be reached during business hours. When sending products into
Horizon, please include your RMA number, a list of the included items, and a
brief summary of the problem. A copy of your original sales receipt must be
included for warranty consideration. Be sure your name, address, and RMA
number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship Li-Po batteries to Horizon. If you have any issues
with a Li-Po battery, please contact the appropriate Horizon Product Support
office.
Warranty Requirements
For Warranty consideration, you must include your original sales receipt
verifying the proof-of-purchase date. Provided warranty conditions have been
met, your Product will be serviced or replaced free of charge. Service or
replacement decisions are at the sole discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service will be completed and
payment will be required without notification or estimate of the expense
unless the expense exceeds 50% of the retail purchase cost. By submitting the
item for service you are agreeing to payment of the service without
notification. Service estimates are available upon request. You must include
this request with your item submitted for service. Non-warranty service
estimates will be billed a minimum of ½ hour of labor. In addition, you will
be billed for return freight. Horizon accepts money orders and cashier’s
checks, as well as Visa, MasterCard, American Express, and Discover cards. By
submitting any item to Horizon for service, you are agreeing to Horizon’s
Terms and Conditions found on our website http://www.horizonhobby.com/content
/servicecenter_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country
of use and ownership. If received, a non-compliant Product will not be
serviced. Further, the sender will be responsible for arranging return
shipment of the un-serviced Product, through a carrier of the sender’s choice
and at the sender’s expense. Horizon will hold non-compliant Products for a
period of 60 days from notification, after which it will be discarded.
Warranty and Service Contact Information
Country of Purchase
| Horizon Hobby| Contact Information|
Address
---|---|---|---
United States of America| Horizon Service Center (Repairs and Repair
Requests)|
servicecenter.horizonhobby.com/RequestForm/|
2904 Research Road Champaign, Illinois, 61822 USA
Horizon Product Support (Product Technical Assistance)|
productsupport@horizonhobby.com
877-504-0233
Sales| websales@horizonhobby.com
800-338-4639
European Union| Horizon Technischer Service|
service@horizonhobby.eu| Hanskampring 9 D
22885 Barsbilttel, Germany
Sales: Horizon Hobby GmbH| +49 (0) 4121 2655 100
FCC Information
Supplier’s Declaration of Conformity
S2200 G2 AC Smart Charger, 2 x 200W (SPMXC2010)
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822
Email: compliance@horizonhobby.com
Web: HorizonHobby.com
IC Information
IC: CAN ICES-3 (B)/NMB-3(B)
Compliance Information for the European Union
EU Compliance Statement: Spektrum S2200 G2 AC Smart Charger (2 x 200W)
(SPMXC2010)
Hereby, Horizon Hobby, LLC declares that the device is in compliance with the
following: EU Low Voltage Directive 2014/35/ EU and EU EMC Directive
2014/30/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.horizonhobby.com/content/support-
render-compliance.
EU Manufacturer of Record:
Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822 USA
EU Importer of Record:
Horizon Hobby, GmbH
Hanskampring 9
22885 Barsbüttel Germany
WE NOTICE:
This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.
© 2020 Horizon Hobby, LLC.
IC3, IC5, EC3, EC5, the Smart Technology logo, and the Horizon Hobby logo are
trademarks or registered trademarks of Horizon Hobby, LLC.
The Spektrum trademark is used with the permission of Bachmann Industries,
Inc.
All other trademarks, service marks, and logos are the property of their
respective owners.
CN201721563463.4. Other patents are pending.
Created 07/20
64415
SPMXC2010
References
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- Horizon Hobby Service Center
- RC Cars, RC Trucks, RC Airplanes, Model Trains, and Slot Cars at Tower Hobbies
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
- Horizon Hobby Service Center
- RC Airplanes and Helicopters, RC Cars and Trucks, RC Boats, RC Radios | Horizon Hobby
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>