LISKA SV-24DF Smartwatch Instructions
- June 6, 2024
- LISKA
Table of Contents
LISKA SV-24DF Smartwatch
APPEARANCE INTRODUCTION
- The bracelet is made of healthy materiaIs, please be assured to use.
- Due to individual differences, if skin feels uncomfortable while wearing, please stop wearing and consult the doctor.
CHARGING AND START-UP
Please charge the product for more than two hours before use. Align the charging port with the metal contacts on the charging base until the charging indicator appears on the bracelet screen.
- Please use the special charging cable that comes with the package, Keep the charging port clear and dry.
- Note: Do not use a power adapter with an output of more than SV 1A to charge, otherwise the circuit may be burned, resulting in no charging.
APP DOWNLOAD
- Scan the QR code on the right with your mobile phone Or Go to APP Store to download and install Da Fit. Please give this software the corresponding permissions to ensure that the Bluetooth connection is normal.
BINDING
- Open the APP and add the bracelet device you want to connect in the APP. When binding, plea-se confirm that the Bluetooth addresses displayed on the APP and the bracelet are the same. (You can check the Bluetooth address of the bracelet in the bracelet settings)
- When pairing, make sure that the Bluetooth of the mobile phone is turned on, and the bracelet needs to be close to the mobile phone to connect. After the pairing is successful, you can check the connection status in the pull-down notification bar of the bracelet.
FUNCTIONS INTRODUCTION
The bracelet supports full-screen touch, slide up, slide down, slide left,
slide right, long press and other operations, slide the screen to switch to
view various functions; you can also click and long press the screen for
related operations.
The bracelet supports functions such as exercise monitoring, heart rate
monitoring, and message reminder etc.
COMMON PROBLEM
-
App can’t search the device
Answer: Please try to press the device button first, if the screen is not lit, you can connect the devi-ce to the charger to charge, to ensure that there is power. -
The device is repeatedly connected and disconnected
Answer: Mobile phones of different brands will automatically clean up the mobile phone background program. You need to add the APP to the mobile phone white list or self-start management. -
The device cannot be charged
Answer: Is there any dirt, corrosion, etc. in the charging place? Only the full contact between the USB interface and the charging head can charge successfully.
MAINTENANCE
- Do not wear bracelets for bathing, swimming or other water activities
- Do not expose the bracelet to a place with high moisture, high temperature or low temperature for long time
- Can prevent such as living room, office, laboratory, light industry studio, storage room dust conditions, not suitable for special dust environment.
- The bracelet has crashed and restarted. Please check the phone’s memory information to clear and try again, or quit the APP and open it again.
The company reserves the right to modify the contents of this manual without any notice. Sorne functions are different in specific software versions, which is normal.
WARRANTY
We do not advise immersion of watches and we do not accept their return as a
guarantee, since we consider them only IMPERMEABLE.
We also do not recommend having a shower with it, as the hot water vapor can
affect both the battery and the clock module. Also avoid sudden changes in
temperature.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>