LISKA SV-V30 Smart Bracelet Instructions

LISKA SV-V30 Smart Bracelet Instructions

LISKA ITS ALL ABOUT TRENDS

1. Description of the product appearance

2. Switching machine
   2.1 . Power On: Long press the screen for 2 seconds or long press the button for 2 seconds to boot;
   2.2. Power off: press and hold the button for 2 seconds or swipe left on the main interface to enter other menus – the “Power off” drop-down menu appears and click to confirm.
   PS: If you can’t turn on the device, please confirm if the battery 1s dead. You need to use the corresponding charging cable to charge.

3. Install the app and pair the device.
   3.1 . Android users m the mobile application store, iOS users search for “DaFit” in the mobile apphcation store or scan the QR code on the right to download and install the app. The IOS system is compatible with version 9.0 or higher, the system Android supports version 4.4 or higher, Bluetooth BLE version 4.2

3.2. Open the phone’s Bluetooth and open the application, select “Add device” and select the device “V30” m the device list search. Confirm the pairing connection (as shown below).
3.3. Unlink: Select “unlink” in the app, after the IOS system delete the device, enter the menu of phone settings – Bluetooth settings. Select “Ignore th is device” to completely remove the bracelet.

4. Introduction to the bracelet menu
   ADDA DEVICE A h ®V30~ ( Selbf’9S Forget Device Cancel
   Note: This product is a full screen touch operation, and each main menu interface swipes up and down to turn pages. Click to confirm I start / fin ish , swipe right to return. Side button function : short press to return to mam interface, long press for 2 seconds to start/ shutdown. Swipe down on the main interface to see the last three pieces of data m phone sync.
   4.1. Main interface Press the mam interface for 2 seconds, change selection appears, click OK or configure m app.
   
   4.2. Other, menus.
   On the main interface, swipe left to enter other menus. Slide the page up, click to enter / confirm, slide right to exit.
   
   4.3. Training.
   Click to enter/ confirm. 8 sport modes are available Swipe up and down. Swipe right to select pause/ end.
   
   4.4. Pedometer.
   Record the number of exercise steps for the day in real time.

4.5. Heart rate
Shows the last heart rate measurement. Click start measuring

4.6. Blood oxygen.
Shows the latest oximetry results. Click Start Measure.

4.7. Dream.
Shows the sleep time of the previous night.

4.8. Blood pressure.
Shows the most recent blood pressure measurement. Click Start Measure.

4.9. Weather.
The bracelet shows only after it has been successfully connected to the phone. Synchronize weather information on your phone.

5. Heart rate measurement instructions.
   Note: Blood oxygen and blood pressure data is for reference only, not for medical use.
   5. 1. The heart rate blood pressure test device is based on the PPG measurement principle, so its accuracy may be different due to physiological factors affecting light absorption and reflection (Including blood circulation, blood pressure , the condition of the skin, the color of the skin, the position of the blood vessels and density).
   5.2. Just wear the armband, activate the heart rate measurement function after 10 minutes, keep the bottom of the sensor clean.
   5.3. Keep your body at rest when measuring. Data measured in different states, such as exercise and diet, will also be diffe rent. If the data gap is large, rest and measure again.
   5.4. Long-term measurement can cause fever, in case of discomfort, remove it until the device cools down before use.

6.  Call reminder/ notification instructions.
   The application can select information to send content. Before Android users log in for the first time, the accessibility of the “DaFit” phone opens the service message notification devices. IOS system only need to request Bluetooth pairing, pairing request in APP. When the phone calls, the bracelet will synchronize the vibration reminder and display the calle r’s ID/ name.
   Note: Mobile Bluetooth off and app output will not generate information to notify. When the phone screen is bright, when the QQ computer is online, 1t will also make the bracelet not receive the notification information.

7. Wrist precautions.
   7. 1. The bracelet is theoretically compat!b!e with mobile devices with 10S 9.0 and higher and Android 4.4 and higher, Bluetooth 4.2. Not all models of mobile devices are compatible. The actual situation will prevail.
   7.2. This product is a precision part inside, please do not disassemble or modify the machine by yourself. Human-induced surface grinding machine to spend, damage hardware or hamper product warranty.
   7.3. Throwing this product into fire and high temperature environment is prohibited to avoid explosions.
   7.4. In a strong static environment, the bracelet may malfunction. For example , show an exception, etc. Do not use it in high voltage and high magnetic level environment to avoid static interference.
   7.5. The waterproof condition of this product is only for cold water. Use with hot water can cause unclear display and reduce battery life.
   7.6. After the product is wet, clean the charging contact points in time to charge. Keep the charging contacts clean and dry.
   7.7. The standby time of this product vanes depending on the environment of use and the way of use.
   

8. Frequently asked questions.
   8. 1. Bluetooth connection not working?
   1. Confirm 1f the phone is a supported device version.
   2. If the B!uetooth wireless connection is affected by the interference signal , the connection time will be a little long. If you are not connected for
   a long time, confirm that the operation is performed in the absence of magnetic field or interference from multiple Bluetooth devices.
   3. Turn off the Bluetooth and mobile background apps and restart.
   4. Turn off the connection of other Bluetooth devices before connecting the phone
   8.2. Can’t find the bracelet? Make sure the cuff is energized and not connected by other equipment. The bracelet is near the mobile search. If it sti ll doesn’t work, turn off the bluetooth phone. Restart the Bluetooth phone after 30 seconds.
   8.3. Is the Bluetooth connection always on? Is there data if it is closed? Data such as movement of the bracelet before connecting the phone will remain in the housing of the bracelet. When the Bluetooth connection of the phone and the bracelet is successful, the data of the bracelet is automati cally loaded in the application. When the space of the bracelet is fu ll , the system will automatically overwrite the oldest data ma loop.
   8.4. Why can’t I load?
   1. Check the charging line and that the device has good contact without damage. The contact points are dean and free of foreign matter.
   2. When the device power is less than 3.6V, there will be 1-2 minutes of battery precharge time.

Warning

This product is not a medical device, the brain and its application should not be used in diagnosis, therapy or protection from disease, illness or otherwise to change habits, special personnel, to avoid causing serious injury. Our company reserves the right to modify and improve any function described in this manual without prior notice. At the same time, our company reserves the right to continually update the product content.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>