BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual
- June 6, 2024
- BZBGEAR
Table of Contents
B G-UHDKVM-100
18Gbps HDMI over HDBaseT Extender
with Bi-directional IR (100M)
User Manual
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
The BG-UHDKVM-100 18Gbps HDMI Extender can extend high definition video/audio signal, RS-232, bi-directional IR, and internet signal, at the distance of up to 328ft / 100 meters between transmitter and receiver via a single CAT6a/7 cable and support resolution up to 4K2K@60Hz 4:4:4. The transmitter supports the ARC function and local audio extract. In addition, the extender is equipped with a bi-directional IR pass-through which allows for source and display control. It also supports USB KVM and PoC functions.
The extender offers the most convenient solution for HDMI extension via a single CAT cable with long-distance capability and is the perfect solution for any application.
Features
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- Support 18Gbps video bandwidth
- Video resolution is up to 4k2k@60Hz YUV 4:4:4
- The maximum transmission distance is 328ft / 100 meters via a single CAT6a/7 cable
- Support ARC (Audio Return Channel) function
- With bi-directional IR, RS-232, and CEC pass-through
- Support USB KVM function
- HDR, HDR10+, Dolby Vision, and HLG function supported
- Supports PoC (Power over Cable) function
- Compact design for easy and flexible installation.
Package Contents
Q t y
|
I t e m
---|---
1| 18Gbps HDMI over HDBaseT Extender (Transmitter)
1| 18Gbps HDMI over HDBaseT Extender (Receiver)
1| IR Blaster cable (1.5 meters)
1| 20~60KHz IR Receiver cable (1.5 meters)
4| Mounting Ear
2| 3-pin Phoenix connector
1| 24V/1A Locking Power adapter
1| User Manual
S p ecifications
T e c hn i c a l
HDCP Compliance| HDCP 2.2 / HDCP 1.4
Video Bandwidth| 18Gbps
Video Resolution| 4K2K 50/60Hz 4:4:4
4K2K 50/60Hz 4:2:2
4K2K 50/60Hz 4:2:0
4K2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p, 480i
All PC resolutions including 1920 x 1200
Color Space| RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr 4:2:2/4:2:0) 8-bit
(4K60Hz 4:4:4)
HDMI Audio Formats| LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD,
Dolby Digital Plus (DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats| PCM 2.0
SPDIF Audio Formats| LPCM2.0, Dolby Digital, Dolby Digital Plus, DTS
ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact
discharge)
Conn ec t i o n
Transmitter| Inputs: 1x HDMI Type A [19-pin female] Outputs: 1x HDBT OUT
[RJ45, 8-pin female] 1x SPDIF OUT [S/PDIF] 1×L/R OUT [3.5mm Stereo Mini-jack]
1×LAN [RG45] Control: 1x IR IN [3.5mm Stereo Mini-jack] 1x IR OUT [3.5mm
Stereo Mini-jack] 1x RS-232 [Phoenix jack] 1x SERVICE [Mini-USB, Update port]
1×USB HOST [USB Type B]
Receiver| Inputs: 1x HDBT IN [RJ45, 8-pin female] 1x SPDIF IN [S/PDIF]
Outputs: 1x HDMI Type A [19-pin female] 1x LAN [RG45] Control: 1x IR IN [3.5mm
Stereo Mini-jack] 1x IR OUT [3.5mm Stereo Mini-jack] 1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port] 2×USB 2.0 [USB Type A]
M ec h a n i c a l
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver: 165mm [W] x 88mm [D] x 18mm [H]
Weight| Transmitter: 170g, Receiver: 165g
Power Supply| Input: AC 100 – 240V 50/60Hz
Output: DC 24V/1A (Locking connector)
Power Consumption| 13W
Operating
Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
R es olution| D i s t a n c e
4K2K| 296ft /90M
1080P| 328ft /100M
R es o l u t i o n / Cable Length
| 4 K 6 0 – Feet / Meters| 4 K 3 0 – Feet / Meters|
10 8 0P 6 0 – Feet / Meters
---|---|---|---
HDMI IN / OUT| 16ft / 5M| 30ft / 10M| 50ft / 15M
The use of a “Premium High-Speed HDMI” cable is highly recommended.
Operation Controls and Functions
Transmitter Panel
N a me
|
Fun c t i o n Description
---|---
Power LED| Red LED is on when the transmitter is working. LED is off when the
transmitter is on standby.
ARC LED| Green LED is on when the ARC function is turned on.
SPIDER LED| Green LED is on when the SPDIF OUT port outputs the audio signal
returned from SPDIF IN on the receiver.
USB HOST| Connect to PC for transmitting receiver’s USB data to the
transmitter.
SWITCH| Press the button to switch the output audio signal source for
SPDIF OUT and L/R OUT port.
SERVICE port| Firmware update port.
DC 24V
| DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either transmitter
or receiver is connected to a 24V/1A power supply, the other doesn’t need a
power supply.
HDBT OUT| RJ45 connector for connecting the HDBT IN port of receiver with CAT
5e/6 cable.
Connection Signal
Indicator lamp (on the left side of the HDBT OUT port)| ▪ Illuminate: The
transmitter and Receiver are in good connection status.
▪ Flash: Transmitter and Receiver are in poor connection status.
▪ Dark: The transmitter and Receiver are not connected.
Data Signal Indicator lamp (on the right side of the HDBT OUT port)| ▪
Illuminate HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI IN| HDMI source input.
IR IN| IR input port for receiving the signal of IR remote.
IR OUT| IR output port for control of source device. This IR output signal is
from the IR IN port of the receiver.
L/R OUT| 3.5mm stereo connector for analog audio output.
SPDIF OUT| SPDIF connector for optical audio output.
RS-232| 3-pin Phoenix connector for RS-232 command transmission. The RS-232
command will pass through from transmitter to receiver or receiver to
transmitter.
LAN| RJ45 connector for connecting Hub or router.
Receiver Panel
N a me
|
Fun c t i o n Description
---|---
Power LED| Red LED is on when the receiver is working. LED is off when the
receiver is on standby.
ARC LED| Green LED is on when the ARC function is turned on.
SPIDER LED| Green LED is on when the SPDIF OUT port outputs the audio signal
returned from SPDIF IN on the receiver.
Two USB 2.0 ports| Connect to a USB device.
SWITCH| Press the button to switch the output audio signal source for SPDIF
OUT and L/R OUT port.
SERVICE port| Firmware update port.
DC 24V| DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either transmitter
or receiver is connected to a 24V/1A power supply, the other doesn’t need a
power supply.
HDBT IN| RJ45 connector for connecting the HDBT OUT port of transmitter with
CAT 5e/6 cable.
HDMI OUT| HDMI output for display.
IR IN| IR input port for receiving the signal of IR remote.
IR OUT| IR output port for control of display device. This IR output signal is
from IR IN port of the transmitter.
SPDIF IN| SPDIF connector for optical audio input.
RS-232| 3-pin Phoenix connector for RS-232 command transmission. The RS-232
command will pass through from transmitter to receiver or receiver to
transmitter.
LAN| Connect to an Internet device such as a PC or laptop.
Audio Signal Output Switching
Switch the output audio signal source for SPDIF OUT and L/R OUT port via the “Switch” button on the panel (the corresponding LED will illuminate). The states of ARC LED and SPDIF LED to indicate the specific output audio signal source, as shown in the table below:
AR C LED| SP D I F LED|
O u t pu t Audio Signal Source for SPDIF OUT port
---|---|---
S t a t e| S t a t e| a n
d L/R OUT port
On| Off| The audio signal returned from HDMI (display device) on the receiver
Off| On| The audio signal returned from SPDIF IN on the receiver
Off| Off| The audio signal extracted from the transmitter
IR Pin Definition
IR Receiver and Blaster pin’s definition as below:
Note: IR remote sends a signal at the distance of 0~5 meters / 0~8 meters with the angle of ± 45° in the vertical direction.
Application Example
Second Year Assurance
BZB Gear wants to assure you peace of mind. We’re so confident in the quality
of our products that along with the manufacturer’s one-year limited warranty,
we are offering free second-year warranty coverage upon registration*.
Taking advantage of this program is simple, just follow the steps below:
- Register your product within 90 days of purchase by visiting BZBGear.com/warranty.
- Complete the registration form. Provide all necessary proof of purchase details, including serial number and a copy of your sales receipt.
For questions, please call 1.888.660.2962 or email support@bzbgear.com.
For complete warranty information, please visit BZBGear.com/warranty or scan the QR code below.
*Terms and conditions apply. Registration is required.
Mission Statement
BZB Gear manifests from the competitive nature of the audiovisual industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today’s AV world without having to break the bank. BZB Gear is the solution for small to medium-sized applications requiring the latest professional products in AV.
We live in a DIY era where resources are abundant on the internet. With that in mind, our team offers system design consultation and expert tech support seven days a week for the products in our BZB Gear catalog. You’ll notice comparably lower prices with BZB Gear solutions, but the quality of the products is on par with the top brands in the industry. The unparalleled support from our team is our way of showing we care for every one of our customers. Whether you’re an integrator, home theater enthusiast, or a do-it yourself-er, BZB Gear offers the solutions to allow you to focus on your project and not your budget.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>