BZBGEAR BG-EXH-100C6 HDBaseT 3.0 Extender with eARC or ARC User Manual
- October 27, 2023
- BZBGEAR
Table of Contents
BG-EXH-100C6
HDBaseT 3.0 Extender with eARC/ARC (100m)
User Manual
Statement
Please read these instructions carefully before connecting, operating, or configuring this product. Please save this manual for future reference.
Safety Precaution
-
To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion during transportation, storage, and installation.
-
The housing of this product is made of organic materials. Do not expose to any liquid, gas, or solids which may corrode the shell.
-
Do not expose the product to rain or moisture.
-
To prevent the risk of electric shock, do not open the case. Installation and maintenance should only be carried out by qualified technicians.
-
Do not use the product beyond the specified temperature, humidity, or power supply specifications.
-
This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not covered under the warranty policy. -
Installation and use of this product must strictly comply with local electrical safety standards.
-
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Introduction
The BG-EXH-100C6 is an HDBaseT 3.0 extender that extends uncompressed HD/UHD
audio / video, eARC/ARC, RS-232, bi-directional IR, 1GbE Ethernet, and USB 2.0
signals up to a distance of up to 100m/328ft using a single CAT6A/7 cable.
Featuring USB 2.0 (host/device configurability), and bi-directional PoC. The
transmitter supports audio embedding or de-embedding, while the receiver
supports audio de-embedding. The extender supports ARC/ARC from the receiver’s
HDMI output and passes through to the transmitter’s HDMI input, or de-
embedding to the transmitter’s HDMI audio only and SPDIF output ports.
The BZBGEAR BG-EXH-100C6 extender is a convenient solution for applications
requiring long distance HDMI extension over CAT cables.
Features
- HDMI 2.0b, HDCP 2.2 and HDBaseT 3.0 compliant
- Uncompressed 4K@60Hz 4:4:4 up to 18Gbps video bandwidth
- HDR, HDR10, HDR10+, Dolby Vision and HLG pass through
- LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD pass through
- Transmission distance is up to 328ft/100 meters over a single CAT 6A/7 cable
- eARC/ARC function (the audio is returned to the HDMI IN port, HDMI OUT (AUDIO ONLY) port and SPDIF OUT port of the transmitter.)
- SPDIF audio reverse transmission
- Bi-directional IR, RS-232 and 1G Ethernet signal pass through
- USB 2.0 transmission, Host/Device is configurable
- Bi-directional 24V PoC function
Packing List
- 1 x HDBaseT 3.0 Extender (Transmitter)
- 1 x HDBaseT 3.0 Extender (Receiver)
- 1 x IR Blaster Cable (1.5 meters)
- 1 x IR Receiver Cable (1.5 meters)
- 2 x 3pin-3.81mm Phoenix Connectors
- 4 x Mounting Ears
- 8 x Machine Screws (KM3*4)
- 1 x 24V/1A Locking Power Supply
- 1x User Manual
Specifications
Technical
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18Gbps
Video Resolution| Up to 4K@60Hz 4:4:4
HDBaseT Bandwidth| 16Gbps on main and 2Gbps on return link
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
Color Space| RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8/10/12-bit
Audio Formats| LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,
DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
L/R Audio Formats| PCM 2.0
SPDIF Audio Formats| LPCM2.0, AC3 5.1, DTS 5.1
IR Level| 12Vp-p
IR Bandwidth| 20K – 60KHz
USB Bandwidth| Up to 350Mbps
Ethernet| 1000Mbps
RS-232| Up to 921600bps
Transmission Distance| 100m (via a single CAT 6A/7 cable)
ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact
discharge)
Connection
**** Transmitter| Input: 1 x HDMI IN [Type A, 19-pin female] Output:
1 x HDMI OUT [Type A, 19-pin female] 1 x HDBT OUT [RJ45, 8-pin female] 1 x
SPDIF OUT [S/PDIF] 1 x L/R OUT [3.5mm Stereo Mini-jack] Control:
1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x
RS-232 [3pin-3.81mm Phoenix jack] 1 x SERVICE [Mini-USB, Update port] 1 x USB
HOST [USB Type B] 2 x USB DEVICES [USB Type A] 1 x LAN [RJ45]
**** Receiver| Input: 1 x HDBT IN [RJ45, 8-pin female] / 1 x SPDIF IN
[S/PDIF] Output:
1 x HDMI OUT [Type A, 19-pin female] 1 x L/R OUT [3.5mm Stereo Mini-jack]
Control:
1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x
RS-232 [3pin-3.81mm Phoenix jack] 1 x SERVICE [Mini-USB, Update port] 1 x USB
HOST [USB Type B] 2 x USB DEVICES [USB Type A] 1 x LAN [RJ45]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver: 170mm [W] x 102mm [D] x 22mm [H]
Weight| Transmitter: 425g, Receiver: 437g
Power Supply| Input: AC 100 – 240V 50/60Hz
Output: DC 24V/1A (US/EU standard, CE/FCC/UL certified)
Power Consumption| 15.36W (P0C)
Operating Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Resolution / Cable Length| 4K60 – Feet / Meters| 4K30 – Feet / Meters| 1080P60
– Feet / Meters
HDMI IN / OUT| 16ft / 5M| 32ft / 10M| 50ft / 15M
Note : The use of “Premium High-Speed HDMI” cable is highly recommended.
Operation Controls and Functions
Transmitter Panel
No. | Name | Function Description |
---|---|---|
1 | Power LED | The red LED will illuminate when the transmitter is powered on. |
2
| ****
LINK LED
| Light on: The transmitter and receiver have a good connection status. Light flashing: The transmitter and receiver are in ‘Low Power Mode’. Light off: The transmitter and receiver are not connected.
3
| ****
VIDEO LED
| Light on: The video is encrypted.
Light flashing: The video is not encrypted. Light off: No HDMI input.
4| ARC LED| Light on: The device is switched to ARC mode. Light off: The
device is switched to SPDIF mode.
5| SPDIF LED| Light on: The device is switched to SPDIF mode. Light off: The
device is switched to ARC mode.
6| SELECT button| Used for switching the ARC and SPDIF modes.
No.| Name| Function Description
---|---|---
7| L/R IN/OUT switch| Switch to the left: The L/R IN/OUT port is the audio
embedding port. Switch to the right: The L/R IN/OUT port is the audio de-
embedding port.
8
| ****
LOOP OUT/ AUDIO ONLY switch
| Switch to the left (LOOPOUT): The HDMI OUT port is the loop-out port for the
HDMI IN port. Switch to the right (AUDIO ONLY): The HDMI OUT port outputs 720P
black screen image, and the audio is from ARC or SPDIF.
9| HOST/ DEVICE USB switch| Switch to the left (HOST): The USB HOST mode is
enabled. Switch to the right (DEVICE): The USB DEVICE mode is enabled.
10| USB DEVICES| Two USB device ports: Connect to USB memory, mouse, or
keyboard.
11| USB HOST| USB extension host port: Connect to PC.
12| SERVICE| Firmware update port.
13
| ****
DC 24V
| DC 24V/1A power supply input port.
Note: The extender supports PoC functionality. Either the transmitter or receiver must be connected to a 24V/1A power supply. The other does not require a power supply.
14| LAN| 1G Network port. The green LED will illuminate when it switches to
Gigabit Ethernet. The yellow LED will illuminate when it switches to 100M
Ethernet.
15| HDBT OUT| 10G Network port. Connect to the HDBT IN port of Receiver with a
CAT 6A/7 cable. It is used for various signals pass-through.
16
| ****
Data Signal Indicator (Yellow)
| Solid: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Dark: No HDMI signal.
17
| ****
Link Signal Indicator (Green)
| Solid: The transmitter and receiver have a good connection status. Flashing:
The transmitter and receiver have a poor connection status. Dark: The
transmitter and receiver are not connected.
18| HDMI IN| HDMI signal input port, connected to signal source device,
supporting eARC/ARC amplifier.
19| HDMI OUT| HDMI signal loopout port. The port can be either a LOOP-OUT or
an AUDIO ONLY port through the LOOP-OUT/AUDIO ONLY switch.
20| L/R IN/OUT| Audio embedding/de-embedding port. The port can be used for
audio embedding/de-embedding through the L/R IN/OUT switch.
21| SPDIF OUT| Optical output port.
22| IR IN| IR signal input port: Connect to the IR Receiver cable.
23| IR OUT| IR signal output port: Connect to the IR Blaster cable.
24| RS-232| RS-232 serial port: Used for serial port command transmission.
Receiver Panel
No. | Name | Function Description |
---|---|---|
1 | Power LED | The red LED will illuminate when the receiver is powered on. |
2
| ****
LINK LED
| Light on: The transmitter and receiver have a good connection status. Light flashing: The transmitter and receiver are in ‘Low Power Mode’. Light off: The transmitter and receiver are not connected.
3
| ****
VIDEO LED
| Light on: The video is encrypted.
Light flashing: The video is not encrypted. Light off: No HDMI input.
4| ARC LED| Light on: The device is switched to ARC mode. Light off: The
device is switched to SPDIF mode.
5| SPDIF LED| Light on: The device is switched to SPDIF mode. Light off: The
device is switched to ARC mode.
6| SELECT button| Used for switching the ARC and SPDIF modes.
7| DEVICE/ HOST USB switch| Switch to the right (HOST): The USB HOST mode is
enabled. Switch to the left (DEVICE): The USB DEVICE mode is enabled.
8| USB DEVICES| Two USB device ports: Connected to U disk, mouse, or keyboard.
9| USB HOST| USB extension host port. Connect to a computer.
10| SERVICE| Firmware update port.
11
| ****
DC 24V
| DC 24V/1A power supply input port.
Note: The extender supports PoC functionality. Either the transmitter or receiver must be connected to a 24V/1A power supply. The other does not require a power supply.
12| LAN| 1G Network port. The green LED will illuminate when it switches to
Gigabit Ethernet. The yellow LED will illuminate when it switches to 100M
Ethernet.
13| HDBT IN| 10G Network port: Connect to the HDBT OUT port of the transmitter
using a CAT 6A/7 cable for various signals pass-through.
14
| ****
Data Signal Indicator (Yellow)
| Solid: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Dark: No HDMI signal.
15
| ****
Link Signal Indicator (Green)
| Solid: The transmitter and receiver have a good connection status. Flashing:
The transmitter and receiver have a poor connection status. Dark: The
transmitter and receiver are not connected.
16| HDMI OUT| HDMI signal output port: Supports eARC/ARC TV.
17| L/R OUT| Audio de-embedding output port.
No.| Name| Function Description
---|---|---
18| SPDIF IN| Optical input port.
19| IR IN| IR signal input port: Connect to the IR Receiver cable.
20| IR OUT| IR signal output port. Connect to the IR Blaster cable.
21| RS-232| RS-232 serial port: Used for serial port command transmission.
Input & Output Switching
Switch the extender to ARC/SPDIF mode by pressing the SELECT button on the
front panel of both transmitter and receiver. The HDMI OUT port of the
transmitter can turn to LOOP-OUT or AUDIO ONLY through the LOOP-OUT/AUDIO ONLY
switch. The input and output routing are different for certain scenarios. See
the diagrams below for details:
Example 1: Set the extender to SPDIF mode, then toggle the LOOP-OUT/ AUDIO
ONLY switch to the right. The HDMI OUT port of the transmitter is now set to
AUDIO ONLY.
Example 2: Set the extender to SPDIF mode, then toggle the LOOP-OUT/ AUDIO ONLY switch to the left. The HDMI OUT port of the transmitter is now set to LOOP-OUT.
Example 3: Set the extender to ARC mode, then toggle the LOOP-OUT/ AUDIO ONLY switch to the right. The HDMI OUT port of the transmitter is now set to AUDIO ONLY.
Example 4: Set the extender to ARC mode, then toggle the LOOP-OUT/ AUDIO ONLY switch to the left. The HDMI OUT port of the transmitter is now set to LOOP OUT.
Example 5: Set the extender to eARC mode, then toggle the LOOP-OUT/ AUDIO ONLY switch to the right. The HDMI OUT port of the transmitter is now set to AUDIO ONLY.
Example 6: Set the extender to eARC mode, then toggle the LOOP-OUT/ AUDIO ONLY switch to the left. The HDMI OUT port of the transmitter is now set to LOOP OUT.
Audio Embedding and De-embedding
The transmitter’s L/R IN/OUT port supports audio embedding or de-embedding using the L/R IN/OUT switch.
-
TX Audio Embedding
When the L/R IN/OUT switch is switched to left, the audio from the external audio device will be embedded to the L/R IN/OUT port. -
TX Audio De-embedding
When the L/R IN/OUT switch is switched to right, the L/R IN/OUT port will output the de-embedded audio from the HDMI IN port.
USB Mode Applications
The BG-EXH-100C6 supports USB 2.0 transmission and the Host/Device is also
configurable.
Mode 1: USB forward from TX to RX
Toggle the HOST/DEVICE USB switch to the left, then power off and reboot the
transmitter to set to USB Host mode. Meanwhile, toggle the DEVICE/HOST USB
switch to left, then power off and reboot the receiver to set to USB Device
mode.
Mode 2: USB reverse from RX to TX
Toggle the HOST/DEVICE USB switch to right, then power off and reboot the
transmitter to set to USB Device mode. Meanwhile, toggle the DEVICE/HOST USB
switch to right, then power off and reboot the receiver to set to USB Host
mode.
IR Pin Definition
IR Receiver and Blaster pin’s definition as below:
Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters. When the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.
Application Example
Tech Support
Have technical questions? We may have answered them already!
Please visit BZBGEAR’s support page
(bzbgear.com/support) for helpful information
and tips regarding our products. Here you will find our Knowledge Base
(bzbgear.com/knowledge-base) with
detailed tutorials, quick start guides, and step-by-step troubleshooting
instructions. Or explore our YouTube channel, BZB TV
(youtube.com/c/BZBTVchannel), for help
setting up, configuring, and other helpful how-to videos about our gear. Need
more in-depth support? Connect with one of our technical specialists directly:
Phone
1.888.499.9906
Email
support@bzbgear.com
Live Chat
bzbgear.com
Warranty
BZBGEAR Pro AV products and cameras come with a three-year warranty. An extended two-year warranty is available for our cameras upon registration for a total of five years. For complete warranty information, please visit bzbgear.com/warranty. For questions, please call 1.888.499.9906 or email support@bzbgear.com.
Mission Statement
BZBGEAR is a breakthrough manufacturer of high-quality, innovative audiovisual
equipment ranging from AVoIP, professional broadcasting, conferencing, home
theater, to live streaming solutions. We pride ourselves on unparalleled
customer support and services. Our team offers system design consultation, and
highly reviewed technical support for all the products in our catalog. BZBGEAR
delivers quality products designed with users in mind.
Copyright
All the contents in this manual and its copyright are owned by BZBGEAR. No one
is allowed to imitate, copy, or translate this manual without BZBGEAR’s
permission. This manual contains no guarantee, standpoint expression or other
implies in any form. Product specification and information in this manual is
for reference only and subject to change without notice. All rights reserved.
No reproducing is allowed without acknowledgement.
Address: 830 National Drive #140, Sacramento, CA 95834, USA · Tel: +1(888)499-9906 · Email: support@bzbgear.com
References
- BZBGEAR - Award-Winning Audio/Video & Live Streaming Solutions
- Knowledge base Archive - BZBGEAR
- Technical Support & Resources - BZBGEAR
- Warranty / Return Policy - BZBGEAR
- Knowledge base Archive - BZBGEAR
- Technical Support & Resources - BZBGEAR
- Warranty / Return Policy - BZBGEAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>