BZBGEAR BG-EXHOC HDMI 2.0 Extender over Single Coax with Bi-Directional IR User Manual

: June 6, 2024
: BZBGEAR

Table of Contents

INTRODUCTION
FEATURES
PACKAGE CONTENTS
SPECIFICATIONS
PANEL DESCRIPTIONS
CONNECTION DIAGRAM
HDMI PIN DEFINITION
TECH SUPPORT
WARRANTY
MISSION STATEMENT
Documents / Resources

BZBGEAR BG-EXHOC HDMI 2.0 Extender over Single Coax with Bi-Directional IR User Manual

INTRODUCTION

The BG-EXHOC HDMI 2.0 Extender over Single Coax with Bi- irectional IR boosts your HDMI transmission range up to 110m (363ft) in Ultra HD 4K2K format over a single coaxial cable. BG-EXHOC is easy to install and works perfectly with Belden 1694A coaxial cables. This device is also equipped with bidirectional IR pass-through. This feature allows users to rely on the same coax cable to carry IR control data for devices like displays and media players

The BG-EXHOC is comprised of two units: transmitter (BG- XHOC[TX]) and receiver (BG-EXHOC[RX]). The transmission range between the sending and receiving units can be up to 110m (363ft) using Ultra HD (4K2K) with 2 channel audio.

FEATURES

HDMI 2.0 compliant
Supports up to 4K2K@60 4:4:4 8bits*
Extends the transmission range up to 110m (363ft) from the HDMI sources at 4K2K@60 4:4:4 8bits
HDCP input & output support
Single coaxial cable
Uncompressed HDMI over Coaxial cable transmission
Audio sample rate supports 32KHz, 44.1KHz, 48KHz
Auto signal equalization
Supports full frequency IR signal from 20KHz to 60KHz
Bi-directional IR path
Wall mounting housing design for easy and robust installation

The range is dependent on the characteristics and quality of the coax cables. Higher resolutions and longer transmission distances require low skew cables for best performance. Solid and shielded coax cable, such as Belden 1694A, with metal 75ΩBNC connectors is recommended.

Noted

Supported Resolution

PACKAGE CONTENTS

1x BG-EXHOC [TX & RX]
2x DC 5V wall wart
1x User Manual

SPECIFICATIONS

Model Name	BG-EXHOC

Technical
Role of usage| Transmitter [TX] Receiver [RX]
HDMI compliance| HDMI 2.0a
HDCP compliance| Yes
Video bandwidth| Single-link 594MHz [18Gbps]
Video support| up to 4K2K@60 4:4:4 8bits
Audio support| Stereo audio
HDMI over Coax transmission range| Ultra HD [4K2K 24-bit color] – up to 110m [363ft]
HDMI Equalization| Auto
Input TMDS signal| 1.2 Volts [peak-to-peak]
Input DDC signal| 5 Volts [peak-to-peak, TTL]
ESD protection| Human body — ±15kV [air-gap discharge] & ±8kV [contact discharge]
PCB stack-up| 4-layer board [impedance control — differential 100Ω; single 50Ω]
Input| x HDMI/ 1x IR socket 1x BNC/ 1x IR socket
Output| 1x BNC/ 1x IR socket 1x BNC/ 1x IR socket
IR remote control| Electro-optical characteristics: t= 25° / Carrier frequency: 20-60kHz
HDMI connector| Type A [19-pin female]
BNC connector| 75Ω interlocking socket
3.5mm connector| 3.5mm earphone jack for IR blaster to control HDMI source device
Mechanical
Housing| Metal enclosure
Dimensions [L x W x H]| Model Package Carton Model Package| 90 x 96 x 25mm[3.5″ x 3.7″ x 1″]| 90 x 96 x 25mm[3.5″ x 3.7″ x 1″]
Weight| 263 x 170 x 97mm [10.3″ x 6.7″ x 3.8″]
Fixedness Power supply Power consumption Operation temperature Storage temperature Relative humidity| 512 x 364 x 288mm [1’7″ x 1.2′ x 11.3″]
1140g [2.5lbs]

Interlocking power supply

5V DC

10 Watt [max]| 6 Watt [max]
0~40°C [32~104°F] -20~60°C [-4~140°F] 20~90% RH [no condensation]

PANEL DESCRIPTIONS

Transmitting unit ► BG-EXHOC-TX

PANEL DESCRIPTIONS

+5V DC: Connects to 5V DC power supply
POWER/SIGNAL LED: Blue light – POWER; Green light – SIGNAL ACTIVE
COAX OUT: Connect to coaxial cable
Micro-USB: for F/W update
HDMI IN: Connect to HDMI source device
IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of an IR receiver
IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of an IR blaster
DIP Switch: [ON] FW update mode; [OFF] Normal mode

Receiving unit ► BG-EXHOC-RX

PANEL DESCRIPTIONS

+5V DC: Connects to 5V DC power supply
POWER/SIGNAL LED: Blue light – POWER; Green light – SIGNAL ACTIVE
COAX IN: Connect to coaxial cable
Micro-USB: for F/W update
HDMI OUT: Connect to HDMI display
IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of an IR receiver
IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of an IR blaster

CONNECTION DIAGRAM

HDMI PIN DEFINITION

Type A

Pin 1 TMDS Data2+
Pin 2 TMDS Data2 Shield
Pin 3 TMDS Data2–
Pin 4 TMDS Data1+
Pin 5 TMDS Data1 Shield
Pin 6 TMDS Data1–
Pin 7 TMDS Data0+
Pin 8 TMDS Data0 Shield
Pin 9 TMDS Data0–
Pin 10 TMDS Clock+
Pin 11 TMDS Clock Shield
Pin 12 TMDS Clock–
Pin 13 CEC
Pin 14 Reserved (N.C. on device)
Pin 15 SCL
Pin 16 SDA
Pin 17 DDC/CEC Ground
Pin 18 +5V Power
Pin 19 Hot Plug Detect

(Receptacle) HDMI

TECH SUPPORT

Before contacting tech support, we may have answered your question already! Visit our BZBGEAR support page at bzbgear.com/support for valuable information on our products.

Here you will find our Knowledge Base (bzbgear.com/knowledge- base) consisting of tutorials, quick start guides, and step-by-step troubleshooting instructions. Also visit our YouTube channel BZB TV at youtube.com/c/BZBTVchannel for help setting up, connecting, and other how-to videos regarding our products.

If you still need answers, please call 1.888.499.9906, email [email protected], or chat at bzbgear.com.

WARRANTY

BZBGEAR Pro AV products and Cameras come with a three-year warranty. An extended two-year warranty is available for our Cameras upon registration for a total of five years.

For an extended two-year warranty on our Cameras, follow these steps:

Register your Camera within 90 days of purchase by visiting bzbgear.com/warranty.
Complete the registration form. Provide all necessary proof of purchase details, including serial number and a copy of your sales receipt.

For complete warranty information, please visit bzbgear.com/warranty or scan the QR code below.

MISSION STATEMENT

BZBGEAR manifests from the competitive nature of the audiovisual and live streaming industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today’s AV world without having to break the bank. BZBGEAR is your answer for applications requiring the latest pro AV and live streaming solutions.

You’ll notice comparably lower prices with BZBGEAR while the performance and quality are on par with the top brands in the industry. Our team offers system design consultation and expert tech support seven days a week for all BZBGEAR products. Our unparalleled support is our way of showing we care for every one of our customers. Whether you’re an integrator, home theater enthusiast, or a do-it-yourselfer, BZBGEAR offers solutions allowing you to focus on your project and not your budget.

CONTACT
Transmitter Receiver
1.888.499.9906 | [email protected] | bzbgear.com

FOLLOW US