Lifting365 FMS Fork Mounted Scoop Instructions
- October 27, 2023
- Lifting365
Table of Contents
Fork Mounted
Scoop (FMS)
Instructions
FMS Fork Mounted Scoop
Prior to initial operation the operator must read and understand the
instructions contained on the plate on the left side of the attachment (as
viewed from the truck).
To fit the attachment to the truck, slide the forks into the fork pockets
until they are fully engaged. Screw the clamps down firmly to retain the
attachment on the forks.
To fill the bucket and pick up a load of material, the material should be
approached with the bucket at ground level. The truck is driven carefully
forward, with the mast as near upright as possible until the bucket fills.
The forks can then be raised and the material transported as required.
The ideal scoop for emptying/filling sands and aggregates.
Compact – design scoop with easy filling characteristics and good
manoeuvrability. The conventional scoop for aggregate and sand.
Model Ref.| Vuweight| C of G Min| C 416 Max| Load
.Centre
---|---|---|---|---
FMS 201,11| .209Kg| 560mm| 650mm| 826mm
FMS 215M| 216Kg| 580mm| .670mm| 8.26mm.
FMS 40M| 262Kg| 600mm| 660mm| 810mm
HAS 50M| 313Kg| 520mm| 880mm| 810mm
Model Ref.| Volume| Min Truck Cap| A (Bucket Height) |
3 ( Bucket width)| C (Bucket Length)
---|---|---|---|---|---
FMS 20M| 0.20m3| 300Kg| 505mm| 800mm| 930mm
FMS 25M| 0.25m3| 375Kg| 505mm| 1000rni-n| 930mm
FMS 40M| 0.40m3| 600K| 608mm| 1000mm| 1170mm
FMS 50M| 0.50m3| 750Kg| 608mm| 1250mn-i| 1170mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>