Lifting365 VRS4 Machinery Moving Skate Instruction Manual

VRS4 Machinery Moving Skate
Instruction Manual

VRS4 Machinery Moving Skate

Set Capacities 2 through to 64 tonnes

Note : Operator must read and fully understand the operating instructions before using this product.

Safety Information

All of the information reported herein is based on data available at the time of publishing. We reserve the right to modify the products at any time without notice. Please verify with us for possible updates.

GENERAL
Hi-tech machinery skates have load bearing centres and are capable of moving large capacities. In saving time and straing, they are the ideal tool for carrying and shifting  equipment, from small to heavy loads. Detailed below are various options available:

**** For your safety and correct operation, please carefully read the manual before use.

1. After lifting the cargo, please the skates in the appropriate place to support the load.
2. Gently lower the cargo onto the skate. Pull the draw bar or push the skate to move the load.
3. After the load has been repositioned, lift the cargo off the skates and move them out of the way before lowering the load back into place.

REMARKS

1. Ensure the load is always in uniform position on the bearing centre plate of the skates.
2. Always keep the surface on which the skate is placed, clean and smooth. DO NOT USE ON UNEVEN SURFACES.
3. Never exceed the maximum load of any skate. Always use the correct equipment to load the skate, such as toe jacks etc.
4. When loading the skate set, make sure the load is distributed in such a way that each individual skate is not overlooked.
5. Make sure the load will not tip over from the skate.
6. Make sure the load is not unstable on the skate and avoid any risk of the load tipping over or falling from the skate.
7. When moving loads on a floor that has a slope make sure you have means of controlling the movement of the load once it starts moving.
8. Always ensure the floor is clean and free from any items that could damage the wheels of the skates.

PERSONAL PROTECTION

1. Always wear safety boots when moving heavy loads.
2. Do not put feet or hands under the load once it is placed on the skates.
3.  When handling the skates, only lift the skates by the handles on the 16 and 36 tonne sets to avoid any risk of trapped fingers.
4. When moving the load on the skate, always ensure that there is no risk of any person becoming trapped by the moving load.

SET SPECIFICATIONS

• 8 tonne (X4+Y4) =
  1 x 4-tonne steering skate with turntable (X4)
  2 x 2-tonne trailing skates (Y4)

• 16 tonne (X8+Y8) =
  1 x 8-tonne steering skate with turntable (X8)
  2 x 4-tonne trailing skates (Y8)

• 24 tonne (X12+Y12) =
  1 x 12-tonne steering skate with turntable (X12)
  2 x 6-tonne trailing skates (Y12)

• 32 tonne (X16+Y16) =
  1 x 16-tonne steering skate with turntable (X16)
  2 x 8-tonne trailing skates (Y16)

• 36 tonne (X18+Y18) =
  1 x 18-tonne steering skate with turntable (X18)
  2 x 9-tonne trailing skates (Y18)

• 48 tonne (X24+Y24) =
  1 x 24-tonne steering skate with turntable (X24)
  2 x 12-tonne trailing skates (Y24)

• 64 tonne (X32+Y32) =
  1 x 32-tonne steering skate with turntable (X32)
  2 x 16-tonne trailing skates (Y32)

MAINTENANCE

Inspect the skates on a regular basis and before use, to ensure they are in a safe to-use condition.
Keep the wheels clean and remove any metal items that have become embedded in the wheels.
Lubricate the wheels to allow the skates to continue to move freely, making moving the load easier.

Spare Parts Breakdown VRS – 2 tonne

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Turntable Screw| 1| 8.| Roller| 3
2.| Turntable| 1| 9.| Bearing 2| 3
3.| Frame| 1| 10.| Wheel Frame| 3
4.| Open Ring| 6| 11.| Bearing 3| 3
5.| Roller Shaft| 3| 12.| Washer| 3
6.| Flat Washers| 6| 13.| Locking Washers| 3
7.| Bearing 1| 6| 14.| Locking Nuts| 3

Spare Parts Breakdown VRS – 4 tonne

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Turntable Screw| 1| 8.| Roller| 5
2.| Turntable| 1| 9.| Bearing 2| 5
3.| Frame| 1| 10.| Wheel Frame| 5
4.| Open Ring| 10| 11.| Bearing 3| 5
5.| Roller Shaft| 5| 12.| Washer| 5
6.| Flat Washers| 10| 13.| Locking Washers| 5
7.| Bearing 1| 10| 14.| Locking Nuts| 5

Spare Parts Breakdown – X4 VMMS8 – Steering Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Bearing| 8| 7.| Retaining Ring| 5
2.| Wheel| 4| 8.| Bolt| 1
3.| Axle| 2| 9.| Nut| 1
4.| Frame| 1| 10.| Bearing| 1
5.| Handle| 1| 11.| Crest Plank Arts| 1
6.| Washer| 9| | |

Spare Parts Breakdown – Y4 VMMS8 – Trailing Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Bearing| 8| 5.| Connect Rod| 1
2.| Wheel| 4| 6.| Washer| 9
3.| Axle| 2| 7.| Retaining Ring| 5
4.| Frame| 1| | |

Spare Parts Breakdown – X8 VMMS16 – Steering Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Frame| 1| 10.| Axle| 4
2.| Shaft| 4| 11.| Frame of Roller| 2
3.| Washer| 4| 12.| Bearing| 16
4.| Retaining Ring| 4| 13.| Washer| 16
5.| Retaining Ring| 1| 14.| Wheel| 8
6.| Bearing| 1| 15.| Bolt| 1
7.| Crest Plank Arts| 1| 16.| Nut| 1
8.| Washer| 8| 17.| Handle| 1
9.| Retaining Ring| 8| | |

Spare Parts Breakdown – Y8 VMMS16 – Trailing Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Bearing| 16| 7.| Retaining Ring| 8
2.| Wheel| 8| 8.| Bolt| 2
3.| Axle| 4| 9.| Connect Plank| 2
4.| Frame| 2| 10.| Elastic Washer| 2
5.| Connect Rod| 2| 11.| Nut| 2
6.| Washer| 26| | |

Spare Parts Breakdown – X12 VMMS24 – Steering Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Frame| 1| 10.| Axle| 4
2.| Shaft| 4| 11.| Frame of Roller| 2
3.| Washer| 4| 12.| Bearing| 24
4.| Retaining Ring| 4| 13.| Washer| 24
5.| Retaining Ring| 1| 14.| Wheel| 12
6.| Bearing| 1| 15.| Bolt| 1
7.| Crest Plank Arts| 1| 16.| Nut| 1
8.| Washer| 8| 17.| Handle| 1
9.| Retaining Ring| 8| | |

Spare Parts Breakdown – Y12 VMMS24 – Trailing Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Bearing| 24| 7.| Retaining Ring| 4
2.| Wheel| 12| 8.| Bolt| 2
3.| Axle| 4| 9.| Connect Plank| 2
4.| Frame| 2| 10.| Elastic Washer| 2
5.| Connect Rod| 2| 11.| Nut| 2
6.| Washer| 24| | |

Spare Parts Breakdown – X18 VMMS36 – Steering Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Frame| 1| 9.| Axle| 4
2.| Shaft| 4| 10.| Frame of Roller| 2
3.| Bolt| 4| 11.| Bearing| 36
4.| Retaining Ring| 1| 12.| Washer| 36
5.| Bearing| 1| 13.| Wheel| 18
6.| Crest Plank Arts| 1| 14.| Bolt| 1
7.| Washer| 8| 15.| Nut| 1
8.| Retaining Ring| 8| 16.| Handle| 1

Spare Parts Breakdown – Y18 VMMS36 – Trailing Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Bearing| 36| 7.| Retaining Ring| 4
2.| Wheel| 18| 8.| Bolt| 2
3.| Axle| 4| 9.| Connect Plank| 2
4.| Frame| 2| 10.| Elastic Washer| 2
5.| Connect Rod| 2| 11.| Nut| 2
6.| Washer| 36| | |

Spare Parts Breakdown – X24 VMMS48 – Steering Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Frame| 1| 10.| Axle| 4
2.| Shaft| 4| 11.| Frame of Roller| 2
3.| Washer| 4| 12.| Bearing| 24
4.| Retaining Ring| 4| 13.| Washer| 24
5.| Retaining Ring| 1| 14.| Wheel| 12
6.| Bearing| 1| 15.| Bolt| 1
7.| Crest Plank Arts| 1| 16.| Nut| 1
8.| Washer| 8| 17.| Handle| 1
9.| Retaining Ring| 8| | |

Spare Parts Breakdown – Y24 VMMS48 – Trailing Skate

Fig. No.| Description| Qty| | Fig. No.| Description| Qty
---|---|---|---|---|---|---
1.| Bearing| 24| 7.| Retaining Ring| 4
2.| Wheel| 12| 8.| Bolt| 2
3.| Axle| 4| 9.| Connect Plank| 2
4.| Frame| 2| 10.| Elastic Washer| 2
5.| Connect Rod| 2| 11.| Nut| 2
6.| Washer| 24| | |

www.gtlifting.co.uk
George Taylor & Company Lifting Gear (Midlands) Ltd.
Unit 4, Fryers Road, Walsall WS2 7LZ UK
T +44 (0)1922 490220 F +44 (0)1922 490229 Eoffice@gtlifting.co.uk

References

• Global Lifting Solutions - GT Lifting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>