Laserliner 082.425A ThermoControl Air Instruction Manual
- June 6, 2024
- Laserliner
Table of Contents
Laserliner 082.425A ThermoControl Air
Function / Application
ThermoControl Air is a professional thermometer for grilling, cooking and roasting that determines the core temperature of various types of meat, poultry and fish. Preset core temperatures, individual temperatures, or a specific time can be set using the linked app.
General safety instructions
- The device must only be used in accordance with its intendedpurpose and within the scope of the specifications.
- Not suitable for explosive environments or medical diagnoses.
- The measuring tools and accessories are not toys. Keep out of reach of children.
- Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
- Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
- The device must no longer be used if one or more of its functions fail or the battery charge is weak.
- Use only original accessories. Using other accessories invalidates the warranty.
- With the measuring probe in the charger, if the LED lights up when the button for checking the charge level is pressed, the charging process is complete.
- Allow the probe to cool slowly before cleaning and storing. Shock from high temperature differential (e.g. from cold water) may damage the probe.
- Never use the probe at temperatures > 85°C.
- Use the probe dry and not too close to the heat source.
- Clean the sensor thoroughly before and after each use.
- Not suitable for dishwashers.
- Do not use the measuring probe with an external voltage.
- Danger of injury! The measuring point is sharp and can lead to injury.
- Store the probe in the charging unit when not in use.
The measuring point can get very hot. Wear protective or barbecue gloves when picking the probe up.
Safety instructions
Dealing with electromagnetic radiation
- The measuring device complies with electromagnetic compatibility regulations and limits in accordance with the EMC Directive 2014/30/EU which is covered by the Radio Equipment Directive 2014/53/EU.
- Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.
- The measuring accuracy may be affected when working close to high voltages or high electromagnetic alternating fields.
Dealing with RF radiation
- The measuring device is equipped with a wireless interface.
- The measuring device complies with electromagnetic compatibility and wireless radiation regulations and limits in accordance with the RED 2014/53/EU.
- Umarex GmbH & CO. KG hereby declares that the ThermoControl Air radio equipment meets the requirements and other specifications of the European Radio Equipment Directive 2014/53/EU (RED). The EU Declaration of Conformity can be found in its entirety at the following address: http://laserliner.com/info?an=AJI
Installation
Inserting battery
Open the battery compartment and insert battery according to the symbols. Be
sure to pay attention to polarity.
Charger
-
Button for checking the battery charge level (charger and measuring probe)
-
Integrated magnet holder (rear)
-
LED charge level display (1)
-
Battery compartment (rear)
Measuring probe -
Point for measuring the contact temperature
-
Insert marking/charging contact
-
Sensor for measuring the environmental temperature/charging contact.
Charging the battery (measuring probe)
Charge level display
Battery (measuring probe)
Insert probe in item to be measured
To avoid damage, the probe must always be inserted into the item to be measured up to the marking and the core temperature may not exceed a temperature of 85°C.
Data transfer
- The device features a Bluetooth® function that enables wireless data transfer to mobile devices with a Bluetooth® interface (such as a smartphone or tablet).
- The system prerequisites for a Bluetooth®* connection are specified at http://laserliner.com/info?an=ble
- The device can set up a Bluetooth®* connection with Bluetooth 4.0 compatible devices.
- The range is set to a maximum distance of 10 m from the terminal device and greatly depends on the ambient conditions such as the thickness and composition of walls, sources of interference as well as the transmit /receive properties of the terminal device.
Application (app)
An app is required to use the Bluetooth® function. You can download the app from the corresponding stores for the specific type of terminal device: Make sure that the Bluetooth® interface of the mobile device is activated.
Marking
Bluetooth®* is always activated once the probe is removed from the charger. A
mobile device can connect to the removed probe via an app.
Once the app is open, the connection assistant provides information on the
status of the Bluetooth®* connection to the measuring device. If the app
identifies more than one device, these can be individually selected using the
connection assistant.
Danger – powerful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical implants (e.g. pacemaker) as well as electromechanical devices (e.g. magnetic cards, mechanical clocks, precision mechanics, hard disks). With regard to the effect of powerful magnetic fields on persons, the applicable national stipulations and regulations must be complied with such as BGV B11 §14 „electromagnetic fields“ (occupational health and safety – electromagnetic fields) in the Federal Republicof Germany. To avoid interference/disruption, always keep the implant or device a safe distance of at least 30 cm away from the magnet.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents. Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Technical Data
Technische Daten| |
---|---|---
Messgröße| Kontakttemperatur Umgebungstemperatur|
|
Messbereich Kontakttemperatur| 0°C … 85°C|
Genauigkeit Kontakttemperatur| ± 1°C|
Messbereich Um- gebungstemperatur| 0°C … 300°C|
Schutzart| IP 66|
Stromversorgung| 1 x 1,5V LR6 (AA)|
Betriebsdauer| ca. 4 Std.|
Arbeitsbedingungen
| Sonde: 0°C … 85°C, Ladeschale: -10°C
… 50°C, Luftfeuchtigkeit max. 85% rH, nicht kondensierend, Arbeitshöhe max. 2000 m über NN (Normalnull)
|
Lagerbedingungen| -10°C … 60°C, Luftfeuchtigkeit max. 85% rH, nicht
kondensierend|
Betriebsdaten Funkmodul
| Schnittstelle Bluetooth LE 4.x; Frequenzband: ISM Band 2400-2483.5 MHz, 40 Kanäle; Sendeleistung: max. 10 mW; Bandbreite: 2 MHz; Bitrate:
1 Mbit/s; Modulation: GFSK / FHSS
|
Abmessungen (B x H x T)| 168 x 24 x 40 mm|
Sonde| 90 mm, ø 5,9 mm|
Gewicht| 80 g (inkl. Batterie)|
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU. This product is an electric device and must be collected
separately for disposal according to the European Directive on waste
electrical and electronic equipment. Further safety and supplementary notices
at: http://laserliner.com/info?an=AJI
Documents / Resources
|
Laserliner 082.425A ThermoControl
Air
[pdf] Instruction Manual
082.425A, ThermoControl Air
---|---