Foshan Baby Bear Technology BB008D Baby Swing User Manual

June 6, 2024
Foshan Baby Bear Technology

Foshan Baby Bear Technology BB008D Baby Swing
LOGO

Foshan Baby Bear Technology BB008D Baby Swing

Foshan Baby Bear
Technology BB008D Baby Swing PRO

After-sales Service

Thank you for purchasing our products. For your due rights and interests, please t.ake good care of the warranty card. If there is any quality problem, please contact with the distributor.
Note:

  1.  From the purchase date, normal users can enjoy one year’s free maintenance service for the circuit board components and one year’s free maintenance service for the whole machine.
  2.  Other consumables and accessories are not covered by the warranty.
  3.  Please show the warranty card and purchase certificate or invoice to be valid.

Non-warranty coverage:

  1.  improper use
  2.  Loss or damage of warranty card
  3.  Damage caused by natural disasters and other irresistible forces
    Please keep the warranty card well.

Warranty Card

Product Model| | Customer Name|
---|---|---|---
Product Name| | Customer Phone Number|
Purchasing Date| | Fault Description|
Customer !\ddress|

Clean & Maintenance

Product Specification:

  1.  Clean the base bracket and seat frame with a wet cloth and a mild detergent. Dry thoroughly then. Please do not use corrosive cleaner.
  2.  Removable and washable fabric
  3. Seat fabric: Clean it with a wet cloth and a mild detergent, and dry it.
  4.  C.anopy: Take it off and put a little cleaner, wash it gently with your hands. Rinse it with clean water, and then hang it to dry; avoiding exposure to the sun.
  5.  Pillow: Tear the Velcro off and take the pillow off. Put a little cleaner, wash it gently by hand, and then rinse it with clean water. Hang it avoiding sun exposure.

Maintenance

  1.  Please check this baby swing regularly. Make sure of each part is well connected and well installed. Stop using for poor connection and connect/install it again if necessary.
  2.  This product contains electronic components, which shall not be used in water or in a humid environment. Please ensure the product is dry, and store it in a cool and dry place, avoiding direct sunshine for a long time.

Troubleshooting

Fast self-inspection solution below

No. Issue Solution

2

| Not energized| L Oieckfirmly whetheoomectedr the. lf adai;tecome:tr and OC thecambleftmare . 2.o.JSll:lTs’0Ccablemservi:eavbetoda rep .PleaseDCcatooE.ntact
3| Motion lo:::k. stuck| Check the rrdion kxk. Pull it upto ll11ock tl1e seat fume.
4| Dlerstring/.Strike| Power off and restrt it again

Note: For other trouble, please contact our customer service for help. Never disassemble and repair the swing by yourself.

Product Introduction

Product Specification:

Product Name: Multi-Function Electric Swing
Model Number : B8008
lnput Voltage: 100-2401/”‘
Output Voltage: SV==

Output Current:

Frequency:

| 1A

50/60Hz

Application :

Main Material:

| dlildren up to a weight of9 kg or unable to sit up unaided

100% polyester fiber, aviation aluminum base bracket

Product Features

  1.  Swinging from side to side, with five gears mimicking human movement.
  2.  Protecting baby’s spine design on the basis of human engineering.
  3.  Power supplied by safe 5V low voltage adapter.
  4.  One-button installation and disassembly, simple and convenient to use.
  5.  Seat cover made of environmental-friendly super soft fabric and non-textile, way, breathable and safe & removable and machine washable seat fabric.
  6.  Made of aluminum alloy base with lightweight and strong hardness guaranteeing safety for baby.
  7.  Controlled by the front panel or remote controller; easy to operate
  8.  With motion lock and safety belt for protection.
  9.  With built-in soft nature sounds & Bluetooth enabled for music.

Parts Instruction

Make sure that all of the following parts listed are included in the box. If any part is missing,
please contact us before operating.No tools are required for assembly.

  1.  Plush toy*2 S) Remote controller
  2.  Pillowl 6) Adaptor1, 2 meters of USB cable*l
  3.  Mosquito net with canopy”l 7) Seat frame*l
  4.  Seat cover 8) Base bracket*l

Remote Control

  •  Power on/off B Play/pause
  •  Time setting e Previous song
  •  BBuluilett-into the msicu/s ic e Next song
  •  Volume up 8 Volume down
  •  Five swing gears
  •  Sleep mode: press to enter sleep mode/gear 2 with timer 15 minutes
  •  Stop swing: press to stop the swing, and press any key to resume .swil’l3,

Installation

For Base Bracket

Assembling: Put the frame in the base with up”shape components aligned. Disassembling: Pull out of the sheet metal and pull up the seat frame

For Pillow and Seat Cover

Installation: Put the seat cover on the seat frame and fasten the snap button on the back.
Attach the pillow to the top retaining ring of the seat frame and press the
Velcro of the pillow.
Removing: Pull off the Velcro to detach the pillow and

For Canopy With Toys
Installation: Attach the toys on the canopy and fasten the clasps to the pipe of the seat frame, and attach the mosquito net to the bottom of the seat frame. Dismantling: Put out of the clasps to remove the canopy.

Safety Belt Instruction
Place the baby into the swing and let his legs across both sides of the crotch support restraint, then turn the crotch support cover-up. Adjust the seat belt on both sides and buckle up.
Note: Be sure to use the safety belt correctly when your baby lies on the baby swing for the safety of your child. Buckle off when you take your baby out of the swing.

User Instruction

Button Description

  • ON/OFF: Touch this button and the Indicator light Is on.
  • Touch it again to turn the swing off. SWING: Touch the button to make swing gear settings.
  • There are five swing gears Indicated by digital light: D-1-2-3-4-5. TIMER: Touch the button to set the time.
  •  MUSIC: Touch the button to play the built-In music.
  • Touch it again to turn the sound off. Turn on the Bluetooth on smartphone and connect with BT_BABY”.
  • The swing beeps, and then Bluetooth is now connected well.
  • Then the music from the cellphone plays. Music priority: Bluetooth>Built-in music
  • lll+VOLU ME+ : Touch the button to increase the volume gradually.
  • VOLUME : Touch the button to decrease the volume gradually.
  • Push the motion lockdown to lock the seat frame and stop movement
  • Pull the motion lock up to unlock the seat frame and the baby the swing will swing again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals