GuaiGLong B0CB13RDDX Lithium Batteries with 2560Wh Instruction Manual

GuaiGLong B0CB13RDDX Lithium Batteries with 2560Wh

Product Information

Specifications

• Model: GuaiGLong
• Voltage: 12V
• Capacity: 200AH
• Battery Type: LiFePO4

Product Usage Instructions

Charging the Battery

• Connect the charger to the GX20 Charging Port using the provided cable.
• Ensure the charger’s indicator changes from red to green to indicate a full charge.

Using Different Ports

• Use the Waterproof plug for low-power devices like sonar and LED lights.
• The Anderson plug is suitable for devices under 1300W power.
• Terminal (M10) should be used for high-power devices like electric motors and engines.
• The car cigarette lighter socket is ideal for powering car electronic products.

Monitoring Battery Status

Keep an eye on the Display Screen to check the remaining battery power and voltage, although the displayed percentage may not be entirely accurate.

FAQ

Q: What happens if the battery voltage goes below 10.4V?

A: The Battery Management System (BMS) will cut off the battery output to protect the battery.

Q: What is the voltage range for optimal performance?

A: The optimal range for a 12V LiFePO4 battery is between 12.2V to 13.2V.

12V 200AH LiFePO4 Battery Product guides and documents

Technical Parameters

• Battery cell type: Lithium iron phosphate battery(LiFePO4)
• Maximum power: 1920W(Build in 150A BMS,Optional Bluetooth BMS)
• Rated capacity: 12V 200AH
• Weight: about 34.17 Pounds
• Size: L16.33W13.38H6.88in
• Nominal voltage: 12.8V
• Operating voltage range: 10V~ 14.6V
• Maximum charging current: 20A
• Charging voltage: 14.6V
• Continuous discharge current: 150A
• Instantaneous discharge current: ≤150A
• Operating environment: 0 ~ 45℃(charging), -20 ~ 60℃(discharging)
• Battery storage period: 90% power (6 months)

Interface Introduction

Waterproof plug (LD20,Output:12v)

• This output port is for outputting a 12V power supply.
• This port has a maximum current of 20A and is used for low-power devices, such as sonar(fish detectors), speakers, LED lights, etc.

Anderson plug (120A)

• This port has a maximum current of 80A and is used for devices with a power of less than 1300W, such as low-power electric motors, low-power engines, etc.

Terminal(M10)

• It is used to connect high-power devices (≤150A, MAX.1920W), such as electric motors, engines, trolling motors, inverters, and other high-power devices.

Charging Port

• GX20(3-pin, 1 positive pole,3 negative poles) It is used to connect a charger for charging and can also discharge, with a maximum current of 20A.

Car cigarette lighter socket

• This socket can provide power to car electronic products such as car refrigerators and air pumps.

USB &PD

• 5V USB qc3.0 Fast charging PD Fast charging

Display Screen

• It can display the percentage of remaining battery power and the voltage of the battery.

Please note

• The percentage of electricity displayed on this display is inaccurate. When using it, you need to estimate the remaining electricity according to the voltage.
• The power of the 12V LiFePO4 battery is concentrated between 12.2v-13.2v. When the voltage is lower than 10.4V, BMS will soon cut off the battery output.
• When charging, the indicator light of the charger changes from red to green to indicate full charge.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>