DocResources Folding & Reclining Chairs Installation Guide
- June 6, 2024
- DocResources
Table of Contents
**DocResources Folding & Reclining Chairs Installation Guide
**
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started. Once all bolts are
inserted, go back & tighten all the bolts.
HARDWARE INCLUDED
TOOLS INCLUDED
SUPPLIED TOOLS
Cordless screwdriver/drill OR Multi-bit handle for the Torx Bit
STEPS 1-2
Attach Seat to Back using Bolt B.
Repeat on other side.
STEP 3
Attach Back Support Brace to Back Support Sides with (4) A Screws.
BACK SUPPORT SIDES
STEP 4-5
Attach Arm to Back using Bolt C. Insert Bolt from Arm, through Back Support
Side, into the Back.
(Note: Screws face outward on Back Support Brace)
Repeat on other side.
STEP 6-7
Turn chair over. Place Washer D in between Seat and Leg. Attach using Bolt B.
Repeat on other side.
STEP 8-9 FOR AD-KING1 MODELS with included Front Brace ONLY
Attach Front Leg Brace to Front Leg using (3) A Screws.
Repeat on other side.
IMPORTANT NOTE!
NEVER adjust the level of recline while you are sitting in the chair, or while anyone else is in the chair. Always adjust with an empty chair and ensure that the back support is completely secure in the recline slots on each side of the chair. To fold the chair, lift the back support and gently push down on the back of the chair. The chair will collapse down to the floor level.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>