CALEX 429240 Multi Color LED Strip Tunable White + Color Ambiance WiFi 2.4 GHz User Guide
- June 6, 2024
- CALEX
Table of Contents
MULTI COLOR LED STRIP
Tunable white + color ambiance
WiFi 2,4 GHz
Getting started
Installation instructions
Please read the Safety Instructions first.
- Clean the surface
- Measure the desired lenght
- Cut to size
- Peel off protective foil
- Stick the strip in place
- Connect controller to the DC adapter (2)
Package content
- Led strip, 1 pcs 3M tape
- Battery (CR2025 – 3 V)
- Remote control
- Controller
- Adapter
Specifications:
- 220-240 VAC / 50/60 Hz, Max. Power 24W
- IP20 (indoor use only)
- Intended use: indoors as additional (party) lighting
- Dispose in a controlled manner for recycling
Remote control instructions
The remote control uses a CR2025-3.3V button battery. The remote control is on automatic standby mode when not in use. Normally the battery can be used for more then six months. The battery can be replaced by the same type.
Set up in 4 easy steps
Before you start write down your network name & password.
Note: this item only works on a 2.4GHz Wifi network, not on a 5GHz WiFi network. Please consult the manual of your router for settings.
1. Download the Calex Smart app from the Google Play store, the Apple Store or scan the QR code.
2. Open the app. First time user? Follow on-screen instructions to create your account. To add this device start by touching ‘add device’ (+) and follow the on-screen instructions.
3. Turn the device on. The lamp will start flashing.
(If the lamp or device does not start flashing, switch it on and off 3 times.
This will reset the lamp or device.)
4. Follow the on screen prompts to finish installation.
If you get the notification the product only works on 2.4GHz networks you should change the WiFi frequency of your network to 2.4GHz only in the setting menu of the router.