TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner Instruction Manual

October 27, 2023
TOOLSTATION

TOOLSTATION - LOGO1

Original User’s Instructions
18L Wet & Dry Vacuum Cleaner
SKU: 15892
TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - Featured
Image

READ BEFORE USE
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE

WHAT’S IN THE BOX

TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - THE
BOX

TOOLS REQUIRED

SPECIFICATION

  • 1300W
  • 230V~,50Hz
  • Max Vacuum Pressure: 18kPa Max Air
  • Flow: 32L/sec Robust Polypropylene tank
  • Blower Function
  • 5m power cable

Technical Data

Model| ZD110P-18L-1300W
Input voltage rating| 220-240 V ~ 50 Hz
Input power| 1300 W
Max. vacuum pressure| 18 kPa
Max. air flow| 32 L/sec
Container volume| 18 L
Dry vacuum volume| 11 L
Wet vacuum volume| 9 L
Protection class| II /
Weight(approx.)| 5.7 kg
Protection degree| IPX4
Cable| H05VV-F, 2×0.75mm² , 5m, BS plug

EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS

**** Warning!
Read the instructions
Wear eye protection
Wear a dust mask.
Wear hearing protection.
Wear protective gloves.
Wear face protection.
Wear tight-fitted protective clothes.
Switch the product off and disconnect it from the power supply

before assembly, cleaning, adjustments, maintenance, storage and
transportation.
| Keep bystanders away!
| Objects thrown by the product could hit the user or other bystanders. Always ensure that other people and pets remain at a safe distance from the product when it is in operation. In general, children must not come near the area where the product is.
| Class II tool
| The product complies with the applicable European directives, and an evaluation method of conformity for these directives was done.
| Recycle unwanted materials instead of disposing of them as household waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
| The product complies with the applicable UK directives and an evaluation method of conformity for these directives was followed.

IMPORTANT SAFETY WARNINGS

WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term ‘power tool’ in the warnings refers to your mainsoperated (corded) power tool or battery operated (cordless) power tool.
This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children must not play with the appliance. Cleaning and maintenance must not be undertaken by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

  1. IMPORTANT: Read the operating instructions before assembling and using for the first time.

  2. Check that the mains voltage is the same as the mains voltage specified on the rating plate.

  3. Pull out the power plug in the following circumstances:
    Whenever the appliance is not in use, before opening the appliance, and before all cleaning and maintenance work.

  4. Never clean the appliance with solvents.

  5. Never pull the plug out of the socket by pulling the cable.

  6. Never leave the appliance unattended when ready for use.

  7. Keep away from children and pets.

  8. Take care to ensure that the power cable does not get damaged by being run over, crushed, pulled or similar.

  9. Do not use the appliance if the power cable is in less than perfect condition.

  10. If the power cable has to be replaced, the replacement must comply with the design specifications of the manufacturer.

  11.  Never vacuum the following: Burning matches, smoldering ash and cigarette butts, combustible, caustic, flammable or explosive substances, vapour or liquids.

  12. This appliance is not suitable for vacuuming dust which can be harmful to your health.

  13. Store the appliance in a dry indoor location.

  14. Never use the appliance if it is damaged.

  15.  Have the appliance serviced only by an authorisation aftersales service outlet.

  16. Use the appliance only to carry out work for which it has been designed.

  17. Take extra care when cleaning steps.

  18. Use only genuine accessories and spare parts.

  19. Keep children and other persons away from the electric tool while it is being used. Allowing yourself to get distracted can cause you to lose control of the tool.

Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

PRODUCT DESCRIPTION AND IDENTIFICATIONS

TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - TOOLS
fig

1. Air flow adjustment 5. On/Off switch
2. Hose 6. Latch
3. Duel action floor brush 7. Caster
4. Carry handle 8. Extension tube

Not all the accessories illustrated or described are included in standard delivery.

ASSEMBLY AND OPERATING INSTRUCTIONS

Intended Use: The wet and dry vacuum cleaner is designed for wet and dry vacuuming using the appropriate filter. The appliance is not suitable for the vacuuming of combustible, explosive or harmful substances.
The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of misuse. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
WARNING! To prevent serious injury from accidental operation, turn the vacuum power switch off and unplug the appliance from its electrical outlet before performing any procedure in this section.
Before you connect the vacuum to a mains supply, make sure that the data on the rating/technical label is identical to the mains data.
Assembly instructions

  1. Unclamp latches.
  2. Lift the power head off the container.TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - fig 2
  3. Remove all the contents from inside the container. Warning: Not all contents are listed in the diagram.
  4. Insert the casters into their sockets on the underside of the container and apply pressure until the casters snap into place. Firmly tighten the 4 screws on the casters.
  5. Attach filter (not required for blowing), see dry or wet operation for correct use of filter.TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - operation3
  6. Place the power head back onto the container, secure into place by clamping shut the latches.
  7. Insert the locking end of the hose (marked with an arrow) into the relevant port of the vacuum and turn to lock into place.TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - locking3
  8. The extension tubes need to be assembled
  9. Attachments can be pushed onto the tubes when required.
  10. Connect the extension tubes with hoseTOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - tubes2

Dry vacuum operation
Always assemble dust bag unless put on HEPA (Purchasing online SKU:88733)

  1. Ensure that the power cord is disconnected from the power outlet.
  2. Remove the power head from the container as shown in the assembly instructions.TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - power2
  3. Fit the foam filter to the underside of the power head. Take care not to damage the foam filter. Unlock the latch and pull out machine head.
  4. Firmly assemble the dust bag when you hear a click which is completely cover the sucking hole. Warning! Assemble the dust bag incorrectly may causes dust leaking.
  5. Place the machine head back onto the vacuum body and lock the latch correctly.
  6. Connect the power cord to a suitable power outlet.
  7. Switch on the vacuum and proceed to clean. (I=ON)
  8. Switch off the vacuum before emptying. (O=OFF)
  9. When emptying the container take care as this may be heavier than you think.
  10. Clean filters and change if necessary.

Wet vacuum operation

  1. Ensure that the power cord is disconnected from the power outlet.
  2. Unlock the latches
  3. Take out of the machine headTOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - machine2
  4. Fit the foam filter to the underside of the power head; take care not to damage the filter.
  5. Place the machine head back onto the vacuum body and lock the latch correctly.TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - filter2
  6. The extension tubes need to be assembled
  7.  Switch on the vacuum and proceed to clean. (I=ON)
  8. Switch off the vacuum before emptying. (O=OFF)
  9. When emptying the container take care as this may be heavier than you think.
  10. Clean filters and change if necessary

IMPORTANT
When vacuuming large quantities of liquids, do not immerse the nozzle completely in the liquid; leave a gap at the tip of the nozzle opening to allow air inflow. The machine
is fitted with a float valve that stops the suction action when the container reaches its maximum capacity. You will notice an increase in motor speed. When this happens, turn
off the machine, disconnect from power supply, and empty the liquid into a suitable receptacle or drain. To continue vacuuming, refit the power head to the container. After
wet vacuuming, turn the machine off and remove plug from power supply. To prevent the machine becoming moldy, empty the container, clean and dry the inside and outside of the container and remove the foam filter and allow to air dry before storage.
The float valve is a safety feature. Do not attempt to remove or modify this in any way. If the cleaner should overturn during wet operation switch off immediately and return it to an upright position. Wait for the valve to reset before commencing cleaning.

BLOWING OPERATION
IMPORTANT!
Before commencing please ensure you have read and understood all the safety instructions.

  1. Ensure that the power cord is disconnected from the power outlet. No filter is required for blowing operations. Ensure that the container is completely empty before commencing.
  2. Remove the hose from the vacuum port and insert firmly into the air outlet.TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - container
  3. Select the most appropriate attachment for the job.
  4. Connect the power cord to a suitable power outlet.TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - attachment
  5. Before switching on, make sure you have a firm hold of the hose end.
  6. Switch on the vacuum and proceed to clean. (I=ON)TOOLSTATION wessex 18L Wet and Dry Vacuum Cleaner - switching
  7. If blowing out dusty environments, wear a suitable dust mask.
  8. Protect eyes with suitable safety goggles and ensure no one else is nearby when operating.

VACUUM AND BLOW AIR FLOW ADJUSTMENT
The air flow can be controlled by setting the min / max adjustment switch to the desired speed.

CARE AND CLEANING

IMPORTANT: Make sure that the tool has been thoroughly cleaned before storing it in a clean, dry and safe place, out of the reach of children.
Remove the plug from the power outlet before commencing any maintenance.
After wet vacuuming, always empty, rinse and dry the container, hose and attachments. If vacuuming sticky spills, clean the tank and attachments with warm soapy water.
The foam filter can be cleaned using soapy water. Rinse and air dry for at least 24 hours.
Take care when cleaning as small wood, metal or glass particles could get trapped in this filter. Check airways on hose and attachments to ensure there are no blockages.
Never use chemical cleaners or an abrasive cloth to clean the vacuum, use a mild detergent and warm water. Dry with a soft dry cloth.
Do not oil the motor.
Store in a dry place.
Serviceable parts can be bought instore or online from Toolstation: www.toolstation.com
SKU:26778 Wessex 18L Wet & Dry Vacuum Cleaner Dust bag 3 PACK
SKU:88733 Wessex 20L Wet & Dry Vacuum Cleaner Cartridge filter (HEPA)
Note: SKU 88733 cartridge filter is compatiable with your 18L vacuum cleaner

TROUBLE SHOOTING

Use this section to help you to try and solve any problems you may have:

PROBLEM POSSIBLE CAUSES REMIDIES
Product does not start Not connected to power supply Connect to power supply
Power cord or plug is defective Check by a specialist electrician
Other electrical defect to the product Check by a specialist electrician
Product does not reach full power Extension cord not suitable for operation
with this product Use a proper extension cord

Power source (e. g.
generator) has too low voltage| Connect to another power source
Air vents / air inlet / air outlet are blocked| Clean the air vents / air inlet / air outlet
Activated safety valve / too much water in the tank| Drain excess of water from the tank
The vacuum will stop picking up dust/water.| Activated safety valve / too much water in the tank| Let the product cool down and then drain excess of water from the tank
Unsatisfactory result| Attachment not suitable for working surface| Use proper attachment
Dust bag is full| Replace with a new dust bag
Dust bag is damaged| Replace with a new dust bag
Dust filter damaged| Replace with a new dust filter
Attachment / extension tube(s) / hose not well connceted.| Check and reconnect the involved part(s)
Attachment / extension tube(s) / hose / handle / air inlet blocked| Remove the blockage(s)
Attachment / extension tube(s) / hose / handle / air inlet defective| Replace involved part with a new one
Dust not being retained in the vacuum (dry vacuuming
configuration)| Worn dust bag / dust filter| Replace with a new suitable part
Dust bag / dust filter not
properly attached| Check and re-attach properly
Defective attachment /
extension tube / hose / handle /
air inlet| Replace involved part with a
new suitable one
Excessive vibration or
noise| Attachment / extension tube(s) /
hose not properly connected| Check and re-connect
Loose screws/bolts/nuts on
handle or Caster| Tighten screws/bolts/ nuts

NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR APPLIANCE, PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE APPLIANCE YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.

DECLARATION OF CONFORMITY / PERFORMANCE

Product Code: 15892/ZD110P-18L-1300W
Product Description: Wessex 18L Wet & Dry Vacuum Cleaner

  1. Toolstation Limited, Express Park, Bristol Road, Bridgwater, Somerset TA6 4RN This declaration of conformity is issued under the sole responsibility of Toolstation

  2. Object of the declaration
    The object of the declaration described above is in conformity with the relevant Community harmonization legislation:- Electromagnetic Compatibility Regulations 2016
    2014/30/EU
    – Electrical Equipment (Safety) Regulations 2016
    2014/35/EU
    – The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
    2011/65/EU&(EU)2015/863

  3.  References to the relevant standards used (or references to the specifications in relation to which conformity is declared:BS EN 60335-1
    BS EN 60335-2-2
    BS EN 62233
    BS EN 55014-1
    BS EN 55014-2
    BS EN 61000-3-3
    BS EN 61000-3-2
    BS EN 62321

  4. Additional information:
    Signed for and on behalf of Toolstation Limited

ENVIRONMENTAL INFORMATION

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects  human health and the environment. For more information about where you candrop off your waste for recycling, please contact your local authority, or where you purchased your product.

GUARANTEE

Toolstation products deliver reliable service for normal, household use in domestic settings. All Toolstation products are individually tested before leaving the factory.
If you are a consumer and you experience a problem with your Toolstation product, which is found to be defective due to faulty materials or workmanship within the Guarantee Period, this Toolstation Guarantee will cover repair or – at the discretion of Toolstation – replacement with a functionally equivalent Toolstation product.
Your product is under guarantee for 2 year from the date of purchase or the date of delivery of the product, if later.
The guarantee is subject to the following provisions:
– The guarantee does not cover accidental damage, misuse, cabinet parts, knobs, or consumable items.
– The product must be correctly installed and operated in accordance with the instructions contained in this manual.
– It must be used solely for domestic purpose.
– The guarantee will be retendered invalid if the product is re-sold or has been damaged by inexpert repair.
– Specifications are subject to change without notice.
– The manufacturer disclaims any liability for the incidental or consequential damages.
– The guarantee is in addition to, and does not diminish your statutory or legal rights.

If you do not have all these items, please contact: www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
www.coreservice.co.uk
Call us +44 01904 947568
Email: support@coreservice.co.uk
Made in China

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals